Conventional loudspeakers generate sound through the vibration of a diaphragm, attached to a rigid frame through elastic suspensions. Although such construction is satisfactory for sound diffusion in steady environments, it is likely to fail in harsh conditions, which is often the case for active noise control applications. Plasma-based actuators appear to be a promising alternative since they do not involve any fragile moving parts. In this paper, a positive corona discharge actuator in a wire-to-mesh geometry is proposed in the perspective of active noise control applications, as it is capable of generating sufficient sound pressure levels with limited signal distortion. The study introduces analytical and numerical models aiming at characterizing the sound field generated by the corona discharge actuator. The numerical simulation can facilitate the designing of such transducers. The acoustic power of the experimental prototype is increased through the optimization of emitter wires arrangement. The comparison of analytical model and numerical simulation with the experiment is presented. The analytical model successively describes the low frequency sound pressure field, while the numerical simulation is valid in the broader frequency range.
1 January 2011 in International Journal of Chemical Engineering
A reduced chemical kinetic model for Titan′s atmosphere has been developed. This new model with 18 species and 28 reactions includes the mainfeatures of a more complete scheme, respecting the radiative fluxes. It has been verified against three key elements: a sensitivity analysis, the equilibrium chemical composition using shock tube simulations in CHEMKIN, and the results of computational fluid dynamics (CFDs) simulations.
Algorithms for Fluid-Structure Coupling techniques are investigated in the lime domain. The accurate prediction of the interaction requires consistency of the interface boundary conditions with the time levels of integration of the fluid and the structure equations. If staggered algorithms are used, the time delay causes non-physical energy dissipation in the system which modifies the calculated aeroelastic behaviour. In order to be compatible, the equations must be integrated simultaneously and implicitly. These techniques are tested on a standard aeroelastic airfoil problem, and then applied to the direct coupling of an assembly of 20 compressor blades performing torsional vibrations.