Owing to their high drug loading capacity and the option to functionalize their shells, hollow particles (HPs) have emerged as versatile platforms for diagnostic and therapeutic applications. However, those two key advantages of HPs are not yet well leveraged. Often, the large volume within the shells is not fully utilized as a consequence of the employed drug loading methods, and to date, only a limited range of functionalities can be successfully implemented into the shells of HPs. Here, the self‐polymerization and adhesion behavior of dopamine are utilized, for the first time, to fabricate polydopamine (PDA)‐mucin HPs using a template‐based method. By adopting molecules or ions as “locks” to adjust the permeability of the shells, cargo molecules can be trapped within the shells with high encapsulation efficiency. Moreover, owing to the intrinsic properties of PDA and mucins, the shells exhibit multiple functionalities in vitro and ex vivo, including free radical scavenging, tissue adhesion, lubrication, and wear prevention. This study presents a facile method to produce multi‐functional PDA‐based HPs from a range of (bio)polymers, thus facilitating potential applications of HPs for the treatment of certain diseases, including osteoarthritis and mouth ulcers.
Porous SiOC tapes were studied as anodes for bioelectrochemical system (BES) using Geobacter spp. as an electroactive microorganism (EAM). The ceramic anodes were produced by tape‐casting of poly(silsesquioxanes), tailoring the surface properties by incorporating graphite and carbon black, and changing the pyrolysis temperature. By varying these parameters, the specific surface area, the hydrophilicity, and the roughness were adjusted, with the pyrolysis temperature playing a major role. When used as anodes at 0.2 V vs. Ag/AgCl sat. KCl in the BES, maximum current densities relative to the geometric surface area (jGSA) up to 5.8 A m−2 were achieved. Microbial community analysis of the biofilm shows the dominant presence of Geobacter spp. as the EAM. Benchmarking the performance of the anodes of this study with anodes using the same EAM demonstrates that porous SiOC anodes are a promising class of materials, as they show jGSA comparable to carbon‐based anodes.
The development of porous ceramic screens with high chemical stability, low density, and thermal conductivity can lead to promising screen channel liquid acquisition devices (SC-LADs) for propellant management under microgravity conditions in the future. Therefore, SiOC screens with aligned pores were fabricated via freeze-casting and applied as a SC-LAD. The pore window sizes and open porosity varied from 6 µm to 43 µm and 65% or 79%, depending on the freezing temperature or the solid loading, respectively. The pore window size distributions and bubble point tests indicate crack-free screens. On the one hand, SC-LADs with an open porosity of 79% removed gas-free liquid up to a volumetric flow rate of 4 mL s−1. On the other hand, SC-LADs with an open porosity of 65% were limited to 2 mL s−1 as the pressure drop across these screens was relatively higher. SC-LADs with the same open porosity but smaller pore window sizes showed a higher pressure drop across the screen and bubble ingestion at higher values of effective screen area when increasing the applied removal volumetric flow rate. The removed liquid from the SC-LADs was particle-free, thus representing a potential for applications in a harsh chemical environment or broad-range temperatures.