Super-span, reinforced concrete, T-shaped cross-section beams (T-beams) with a service life of more than 30 years are widely used in highway bridges in China. Most of these beams have been retrofitted with glass fiber-reinforced plastic (GFRP) to prevent performance degradation. However, the actual shear performance, ultimate state, and failure mechanism of the existing retrofitted super-span concrete T-beams are currently unclear for many inextricable problems. To fill these gaps, in this study, one super-span concrete T-beam, in service for 31 years and retrofitted with GFRP, was extracted from a highway bridge to conduct shear experimentation in a structural laboratory. To assess the particularity of the specimen, finite element analysis was also conducted using ABAQUS software as a supplement to the shear tests. The failure procedure of the specimen was investigated, and the influence of the loading mode on the shear performance of a super-long and old T-beam was also studied. It is concluded that the failure of the super-span T-beam begins with small cracks at the bottom of the mid-span, rather than a loading point.
12 February 2010 in Journal of Central South University of Technology
Super-span (20 m) non-prestressed T-section reinforced concrete beams have been in service for more than 30 years and are common in Chinese highway bridges. However, the actual performance of these super-span T-section reinforced concrete (RC) beams that have been reinforced with FRP, including their process of failure from a service state to a failure state, has not been determined. In this study, original RC T-beams, with a 20 m span and retrofitted with FRP, were taken from a highway bridge. Their flexural performance was detected via experiments in a laboratory. The experiments revealed that the sectional strain distribution is more non-uniform. The mid-span ribs clearly play a role in strengthening the section and the bearing reservation was studied based on a subsequent sectional analysis. It became clear that the load-bearing reservation of an old super-span T-beam changes during the entire life of the specimen; not only because of the depression of the resistant capacity and the reinforced measure, but also due to the updates to load codes.
29 December 2010 in Journal of Shanghai University (English Edition)
Retrofitted super-span old T-shaped concrete beams (RS-OCT beams) are commonly used in highway bridges in coastal cities and offshore zones in China. The realization of a practical ultimate state for this beam under a bending load is still lacking. In this study, a flexural experiment on an original RS-OCT beam subjected to a long-term vehicle cyclical load was conducted in a laboratory. Several interesting phenomena were discovered. Notably, a butt-weld joint typically exists on longitudinal reinforced bars, which may be vulnerable to bending. The RS-OCT beam simultaneously suffered from the double function of atmospheric environment and fatigue during service. Based on the time-dependent and fatigue theories of materials, finite element analysis was performed using the ABAQUS software. The flexural behavior of the RS-OCT beam at various time periods was simulated. Subsequently, the flexural bearing capacities of the beams were calculated. The safety reservation of the RS-OCT beam at various time stages was related to the change in material properties and upgrading of the loading level. The latter plays a dominant role in the service state.