The aim of this research is to present the studies carried out to design three-phase core type distribution transformers, with the aid of optimization techniques. The minimization of losses is presented in two steps, first through the use of a mono-objective function, and second with the use of multi-objective function to minimize losses and the total mass of the active part of the transformer. The algorithms used are: Differential Evolution and Particle Swarm Optimization, their performances are compared through the results obtained. The main project parameters, such as core dimensions, total losses, no load current and the energizing current are estimated analytically through OCTAVE software. The analysis of magnetic flux density in the core is simulated using the Finite Element Method. Multiobjective optimization allows working with two or more conflicting objectives, and at each iteration, it stores the various non-dominant Pareto Front solutions, helping designers to choose the solution that best meets their needs. The results obtained with the mono-objective and multiobjective optimization techniques were interesting to minimize the losses and/or cost of the project
With a view to reducing harmonic content in electrical power systems, and, consequently, improving power quality level, filters and other harmonic compensation devices are widely used. In the category of filters, they can be distinguished into two classes that are related to the operating mode, active or passive, both widely known and applied in electrical power grids and in the most diverse industry sectors. In this sense, taking into account the use of compensating devices in four-wire electrical systems feeding single-phase, non-linear loads, this paper presents a new hybrid arrangement of harmonic compensation that incorporates both active and passive filtering, which performs all functions concerning the harmonic compensation of a four-leg shunt active power filter. In this hybrid arrangement, the harmonic filtering of positive and negative sequence components is performed by a three-leg shunt active power filter, while the filtering of zero-sequence harmonics is attributed to the electromagnetic zero-sequence suppressor. The results, which confirm the effectiveness of the proposed hybrid arrangement, are proven through simulations and experimental tests in different operating scenarios, revealing a substantial improvement in the system’s power factor, as well as a reduction in harmonic distortions.
Com o aumento populacional, surgem desafios significativos a serem enfrentados por governos, empresas e universidades, principalmente nas áreas urbanas, nas quais a gestão dos recursos energéticos é uma preocupação central. Com vistas a superar esses desafios, os setores público e privado têm investido em tecnologias e soluções inovadoras, orientadas pelo conceito de cidades inteligentes. Assim, neste trabalho são levantados dados relacionados à eletricidade e aos sistemas de telecomunicação, alicerces fundamentais do desenvolvimento urbano, de todas as capitais no Brasil, tendo como foco a cidade de Palmas, Tocantins, capital mais jovem do país. A pesquisa baseia-se em dados oficiais de fontes governamentais, garantindo a precisão das informações. Os dados apresentados relacionam eletricidade e telecomunicações ao índice de desenvolvimento humano e à renda per capita das capitais do Brasil. Assim, o estudo ressalta a importância da integração de energias renováveis, o fomento à mobilidade elétrica e a contínua modernização da infraestrutura de telecomunicações para atingir metas de eficiência, sustentabilidade e inovação, características essenciais de uma cidade inteligente.
16 October 2023 in Academic Journal on Computing, Engineering and Applied Mathematics
Água e energia elétrica são bens essenciais indispensáveis à vida e às atividades humanas. Com a crescente modernização do saneamento e aparelhos elétricos, o consumo de energia nesses sistemas ascendeu proporcionalmente. Sem eletricidade, a universalização do abastecimento de água e dos serviços de esgotamento sanitário são impensáveis. No setor, a eletricidade é usada principalmente para alimentar os robustos conjuntos motobombas que realizam o recalque dos líquidos, água ou esgoto, para um ponto mais alto, esses mesmos conjuntos motobomba também são responsáveis por consumir cerca de 2 a 3% da energia mundial. Portanto, há necessidade de soluções sinérgicas envolvendo os dois setores para melhorar a eficiência dos processos operacionais e energéticos do saneamento. Assim, este artigo se propõe a analisar os principais indicadores do setor e apresentar a relação entre a evolução do consumo de água e energia nos sistemas de saneamento e as diferenças entre os estados brasileiros. Além disso, as melhores práticas para aumentar a eficiência dos serviços de abastecimento de água e esgotamento sanitário elucidando técnicas utilizadas para melhorar as operações e os sistemas de gestão de energia são apresentadas.
6 November 2019 in International Transactions on Electrical Energy Systems
This paper presents the experimental investigation of an electromagnetic suppressor to minimize the circulation of zero‐sequence currents in three‐phase four‐wire distribution systems. The proposed zero‐sequence current electromagnetic suppressor (ZSS) integrates two distinct electromagnetic devices, namely a zero‐sequence filter (ZSF) and a zero‐sequence blocker (ZSB), connected in parallel and in series between the source and the load, respectively. In this paper are presented the theoretical modeling and analysis of each device, the mathematical concepts of harmonic compensation, and the procedures for the design and determination of the constructive details. The experimental results of the combined operation of the devices that integrate the ZSS demonstrate the feasibility of the proposed arrangement, by minimizing the flow of the zero‐sequence harmonic currents in the source side, enabling a significant reduction of the current in the neutral conductor, and also by improving the system power factor.
15 August 2023 in Academic Journal on Computing, Engineering and Applied Mathematics
This tutorial paper provides a comprehensive guide on performing switching operations in distribution systems using ATPDraw™ software. The focus is on understanding the appropriate modeling and simulation techniques for various types of load switching events in electrical distribution systems. The tutorial covers key aspects such as lateral branch switching, lumped load, distributed load, capacitor, and non-linear load. By acquiring a thorough understanding of these switching operations, researchers and practitioners can effectively study and analyze electrical distribution systems. Having the knowledge and skills to accurately model and simulate switching events is crucial for conducting in-depth studies related to energy distribution. This tutorial serves as a valuable resource for researchers and professionals seeking to enhance their understanding and proficiency in modeling and simulating switching operations in electrical distribution systems.