This study was conducted to study the redistribution of internal force and the development of the plastic hinge of an MBS with foundations at two different elevations considering the torsional effect. The results indicate that the redistribution of the base shear of MBS is evident at different embedding ends, and the redistribution of story shear on different floors also took place. The redistribution of the shear force of columns is different at the upper- and lower-embedding sides, and the internal force redistribution is more prominent along the slope direction. Consequently, the redistribution of the internal force of MBS should be considered in practical seismic design. Furthermore, the damage of MBS is transferred from the floors above the upper-embedding end to the floors under the upper-embedding end with the increase in the seismic intensity, where the elements at the floors above the upper-embedding end suffer the most serious damage, and the damage is unevenly distributed in the upper-embedding story and the adjacent upper story. The lower-embedding column is more prone to hinge across the slope direction because of the torsional effect. With changes, the redistributions of the shear force of the base, story, and column are different. A larger would result in a weaker redistribution of base shear. The redistribution of the story shear of the 1st floor and its columns along the slope direction shows an increasing-decreasing tendency with the increase in , and the redistribution is the most serious when is 0.4. While across the slope direction, the redistribution of the story shear tends to be weakened as increases. The forming of the plastic hinge of single-frames along the slope direction is related to and , especially the damage of the upper-embedding columns. The torsional effect has a significant influence on the damage of the single-frames across the slope direction. Some measures should be taken to improve the bearing capacity of the upper embedding columns and columns on floors under the upper-embedding end, as well as the drift ductility of the upper-embedding columns.
7 November 2021 in Journal of Earthquake Engineering
The elongation of beams in reinforced concrete frames due to flexural cracking and yielding is restrained by the surrounding structural components, thereby leading to axial force in the beams. To study the effects of beam axial restraint on the beam flexural and joint shear behaviors, cyclic lateral loading experiments were conducted on four beam-column substructures, two of which were restrained from beam elongation. The experiments indicated that the passively developed axial force significantly increases the beam flexural capacity. Moreover, the beam axial restraint increased shear demand on beam-column joints; as a result, joint shear failure occurred in one test specimen.
28 August 2024 in Science of The Total Environment
This paper presents a hybrid Bayesian solution to the multidisciplinary uncertainty quantification challenge posed by NASA Langley Research Center. The hybrid approach builds probabilistic models of the outputs by combining the simulations and “experimental” observations provided by NASA. The proposed method is a synergy between Gaussian process surrogate modeling and Bayesian principles, and the resulting tool allows construction of surrogate models, parameter calibration, and variance-based global sensitivity analysis. Besides Sobol indices, a cumulative-density-function-based sensitivity to the probability of failure is also explored. Particle swarm optimization has been used in conjunction with the Gaussian process surrogates to find extreme values of both the mean value of the worst-case requirement function and the failure probability. The capability of the proposed techniques is demonstrated on the four subproblems of uncertainty characterization, sensitivity analysis, uncertainty propagation, and ...
3 November 2020 in Journal of Earthquake Engineering
A simplified framework is proposed in this study to assess the seismic fragility curves of reinforced concrete (RC) columns under different failure patterns in a unified manner. Within this framework, RC columns are simulated by an equivalent single-degree-of-freedom system, where a quasi-static experimental database is compiled to calibrate the seismic demand model and identify the limit state capacity. By comparing the seismic demand model with the limit state capacity, the seismic fragility curves of RC columns under different failure patterns are generated accordingly. Finally, empirical equations are proposed to predict the seismic fragility parameters for engineering applications.
The configuration of riverside bridges, such as the spatial distribution, wading status, and ship accessibility of piers, is generally different from river‐crossing bridges. Thus, the ship collision risk of riverside bridges cannot be assessed using conventional assessment methods applicable to river‐crossing bridges. The aim of this paper is, therefore, to develop a new probabilistic method for assessing the risk of ship collision with riverside bridges. First, a fully probabilistic framework for assessing the ship‐bridge collision risk is presented. Second, a new probabilistic hazard analysis model of ship collision with riverside bridges is proposed, based on a combined study of riverside bridge characterization and an improved yaw ship collision model. A simplified empirical model for evaluating ship‐bridge collision force is then adopted, and the probabilistic distribution of the collision force is obtained based on Monte Carlo simulation. Furthermore, finite element simulation is conducted to estimate the collapse probability of piers. Finally, the method developed is applied to the probabilistic assessment of ship collision risk with riverside bridges located at Shabin Road, Chongqing, China. The results show that the risk of ship‐bridge collision at Shabin Road is low to moderate. The example demonstrated indicates that the methodology introduced in this paper is capable of assessing the ship‐bridge collision risk in a concise and rapid way.