Different implantable antenna designs exist to establish communication with implantable devices depending on the domain of use and the implantation space. Owing to their nature and purposes, these antennas have many imposed criteria on various characteristics, such as bandwidth, multiband behavior, radiation pattern, gain, and specific absorption rate (SAR). This presents a challenge when it comes to achieving satisfying results without a major compromise in any of these crucial parameters. Additionally, many of the existing designs do not follow a specific approach to obtain results. Measuring different parameters of such fabricated structures requires special conditions and special environments mimicking the tissues where they are supposed to be placed. For such issues, the use of biological or synthetic phantoms is widely employed to validate what is obtained in simulation, and a multitude of formulas exist for the creation of such phantoms, each with its advantages and drawbacks. In this paper, a miniature dual-band structure derived from the first iteration of the Koch fractal structure is designed to operate 2 mm below the skin in the arm of the human body, with the MICS (Medical Implant Communication System) and ISM (Industrial, Scientific, Medical) 2.4 GHz bands. The purposes of the design are to derive structures from commonly used shapes with certain behavior while maintaining miniaturization, and to easily design dual-band implantable antennas. More than one band is used to diversify uses, since bands such as the MICS band are mainly dedicated to telemetry. The structure is characterized not only by its low profile compared to various structures found in the literature with dimensions of 17.2 × 14.8 × 0.254 mm³, but also its ease of design, independent shifting of resonant frequencies, and the absence of the need for a matching circuit and a shorting pin (via) for miniaturization. It exhibits satisfying performance: bandwidths of 23 MHz in the MICS band and 190 and 70 MHz in the vicinity of the ISM 2.4 GHz band, and measured gain in the latter band of −18.66 and −17 dBi in the azimuth and elevation radiation patterns, respectively. To validate the antenna’s properties in a skin-mimicking environment, two simple phantom formulas found in the literature were explored and compared in order to identify the best option in terms of accuracy and ease of fabrication.

In this paper, a compact multi-split-ring resonator-based antenna is presented for wireless applications. The proposed antenna integrates multiple resonators to achieve multiband operation, where each resonator corresponds to a specific frequency band. A theoretical analysis is conducted to model the equivalent circuit of the proposed antenna, followed by an analytical study to calculate the resonant frequency of each resonator. By integrating these resonators, the proposed antenna achieves a compact size of 23 × 24 × 1.6 mm³ (0.19 × 0.2 × 0.01λ³), resulting in a size reduction of 81.6% compared to a conventional patch antenna, while maintaining gain, improving bandwidth, and providing excellent impedance matching. The proposed antenna covers the 2.4–2.8 GHz (14.55%), 3.25–3.75 GHz (14.28%) and 4.5–7.84 GHz (54.13%) frequency bands, providing acceptable gains of 1.5 dBi, 2 dBi and 3.2 dBi, respectively. The antenna was designed with CST, its performance was verified with HFSS simulations and it was validated with an equivalent circuit in ADS. Finally, the antenna was fabricated to confirm the accuracy and reliability of the simulation results, and it was found that the measurements agreed well with the simulations. This multiband functionality, combined with a compact form factor and simple feed line, makes the antenna cost-effective, easy to manufacture and suitable for various wireless communication applications, including 5G sub-6 GHz mid-band (2.5/3.5/5/5 GHz), RFID (2.45/5.8 GHz), WiMAX (2.4/3.5/5.8 GHz), Wi-Fi 5/6/6E (2.4/5/6 GHz) and WLAN (5.2/5.8 GHz).

This paper presents a compact, single-layer substrate-integrated waveguide (SIW) bandpass filter for 5.8 GHz WiMAX applications. The filter achieves an improved performance trade-off through a novel hybrid design strategy that combines central vertical perturbation vias with symmetrically etched complementary split-ring resonators (CSRRs). This configuration implements a hybrid magnetic–electric perturbation within a single cavity, enabling simultaneous control of electric and magnetic field confinement. The proposed topology achieves an optimized balance among unloaded quality factor Q_u, insertion loss, selectivity, and structural simplicity. Through targeted intra-cavity field manipulation, the filter attains a Q_u of 239.7, a narrow fractional bandwidth of 3.08% (5.75–5.93 GHz), and a low insertion loss of 1.12 dB. It also delivers enhanced selectivity compared to conventional single-cavity designs and performs competitively with multi-resonator architectures. An equivalent circuit model accurately captures the via–CSRR interaction and agrees closely with full-wave electromagnetic simulations. Experimental results confirm excellent return loss and robust performance across the entire WiMAX band (5.725–5.850 GHz). Thus, the proposed filter offers a practical, high-performance, and manufacturable solution for selective RF front-end applications.