Moving components of industrial machines and tools are subjected to wear and friction. This reduces their useful life and efficiency in running conditions, particularly at high temperatures. One of the most popular solutions is to apply an appropriate surface coating to the tribocouple’s base materials. In this study, tribometer experiments were used to evaluate the tribological performance of cathodic arc physical vapor deposited (CAPVD) AlCrN, TiSiN, CrTiN, and ZrN coatings on the gas nitrided AISI H13 tool steel to explore the effects of nitriding the steel on wear and friction behavior of these coatings at ambient and elevated temperatures. The coatings characterization is split into three main parts: mechanical, morphological, and chemical characterization. Nanoindentation has been used for mechanical characterization, thin film X-ray diffraction (XRD), and an energy-dispersive X-ray spectrometer mounted on a scanning electron microscope for chemical characterization, optical profilometer, and atomic force microscopy (AFM) for morphological characterization. Significant improvements in the adhesion qualities of the coatings to the substrate were achieved as a result of nitration. Due to this circumstance, the coatings’ load-bearing capacity and high-temperature wear resistance ratings were enhanced. The wear results showed that the AISI H13 tool steel nitriding with AlCrN and ZrN layers decreased wear rates by two to three times at 700 °C.
In this study, pure TiN coatings were applied on AISI52100 steel surfaces with a magnetron sputter at different DC power and N2 flow to develop a wear resistance coating for sliding tribopairs working in atmospheric and vacuum conditions. Wear and friction characteristics of these coatings were investigated with a tribometer under both vacuum and atmospheric conditions. DC power and N2 flow affected the coating thickness and structure. TiN coatings showed different wear and friction characteristics under ambient and vacuum conditions due to oxidation level of the surface.
Magnetron sputtered PVD thin-film TiB2 coatings were investigated to be a wear-resistant cam tappet coating which runs under the boundary lubrication regime in internal combustion engines (ICEs). A high negative biased AISI 52100 samples were coated at RF powers of 150, 170 and 190 W. Coatings were characterized via nanoindentation, SEM/EDX, XRD and Raman analysis. Friction and wear behaviors of these coatings were evaluated by tribometer tests at 25 and 50N loads. Tests and tribochemical analysis showed that thin-film TiB2 coatings are very effective to reduce friction coefficients (COFs) and wear rates with 30, 424 GPa hardness and elastic modulus, respectively. Therefore, thin-film TiB2 has been evaluated as a good cam tappet coating for ICEs.
This paper particularly focuses on 2D materials and their utilization in military applications. 2D and heterostructured 2D materials have great potential for military applications in developing energy storage devices, sensors, electronic devices, and weapon systems. Advanced 2D material-based sensors and detectors provide high awareness and significant opportunities to attain correct data required for planning, optimization, and decision-making, which are the main factors in the command and control processes in the military operations. High capacity sensors and detectors or energy storage can be developed not only by using 2D materials such as graphene, hexagonal boron nitride (hBN), MoS2, MoSe2, MXenes; but also by combining 2D materials to obtain heterostructures. Phototransistors, flexible thin-film transistors, IR detectors, electrodes for batteries, organic photovoltaic cells, and organic light-emitting diodes have been being developed from the 2D materials for devices that are used in weapon systems, chemical-biological warfare sensors, and detection systems. Therefore, the utilization of 2D materials is the key factor and the future of advanced sensors, weapon systems, and energy storage devices for military applications.