Moving components of industrial machines and tools are subjected to wear and friction. This reduces their useful life and efficiency in running conditions, particularly at high temperatures. One of the most popular solutions is to apply an appropriate surface coating to the tribocouple’s base materials. In this study, tribometer experiments were used to evaluate the tribological performance of cathodic arc physical vapor deposited (CAPVD) AlCrN, TiSiN, CrTiN, and ZrN coatings on the gas nitrided AISI H13 tool steel to explore the effects of nitriding the steel on wear and friction behavior of these coatings at ambient and elevated temperatures. The coatings characterization is split into three main parts: mechanical, morphological, and chemical characterization. Nanoindentation has been used for mechanical characterization, thin film X-ray diffraction (XRD), and an energy-dispersive X-ray spectrometer mounted on a scanning electron microscope for chemical characterization, optical profilometer, and atomic force microscopy (AFM) for morphological characterization. Significant improvements in the adhesion qualities of the coatings to the substrate were achieved as a result of nitration. Due to this circumstance, the coatings’ load-bearing capacity and high-temperature wear resistance ratings were enhanced. The wear results showed that the AISI H13 tool steel nitriding with AlCrN and ZrN layers decreased wear rates by two to three times at 700 °C.
In this study, AlCrN and AlTiN coatings with various interlayer numbers and compositions were deposited on AISI D2 cold work tool steels using cathodic arc-physical vapor deposition to enhance the adhesive and abrasive wear resistance of cold forming tools. Linear reciprocating tribometer experiments were conducted at 15 and 30 N loads under dry sliding conditions to evaluate the wear resistance and friction characteristics of these coatings. The coatings were chemically and morphologically characterized using an optical microscope, an atomic force microscope, a scanning electron microscope equipped with energy-dispersive X-ray spectroscopy, and X-ray diffraction analysis. Wear scars were examined with an optical profilometer after the tribometer tests to determine wear volumes and wear mechanisms. The results showed that AlTiN coating with six interlayers could be a cold work steel coating with nearly 6 times lower wear rate compared to AlCrN coatings at 3.1 GPa contact pressures.
22 September 2020 in Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology
Additives are important components to reduce friction and wear of tribological systems. Zinc dithiophosphate (ZDDP), the most commonly used anti-wear additive prevents the tribological system from the friction and wear loss without any commercially available antagonist additive. However, its environmentally harmful content enforces to lubricating oil manufacturers to replace it with an alternative one. Therefore, in this study, the H3BO3 + MoS2 combination was tested in the boundary lubrication regime in a tribometer with a pin on flat reciprocating test module to be a possible alternative anti-wear additive against ZDDP. The friction and wear behavior of Boric acid (H3BO3) + Molybdenum Disulfide (MoS2), ZDDP, MoS2, and H3BO3 evaluated in terms of friction coefficient (COF), wear rate, surface energy and tribo-chemical analysis of tribofilms. SEM/EDX and XPS were employed to explore tribofilm formations on the wear scars. According to the results, the addition of MoS2 into H3BO3 presented a similar tribological performance to ZDDP by forming a strength tribofilm on the surface containing B2O3, MoO3, and metal sulfate.