[[abstract]]The ramification of micropipes is observed using scanning electron microscopy, optical microscopy, and synchrotron x-ray radiography. The conditions for the ramification of dislocated micropipes are determined theoretically within a model when the angles between dislocation lines are small. It is shown that the ramification of micropipes into two smaller ones is possible only for micropipes with radii that exceed the equilibrium micropipe radius and is associated with a decrease in the total micropipe surface area.[[fileno]]2060117010018[[department]]工程與系統科學
To exploit unique properties of thin films of group III-nitride semiconductors, the production of native substrates is to be developed. The best choice would be AlN; however, presently available templates on sapphire or SiC substrates are defective. The quality of AlN could be improved by eliminating the substrate during the layer growth. In this paper, we demonstrate freestanding AlN layers fabricated by an SiC substrate evaporation method. Such layers were used to investigate dislocation structures near the former AlN–SiC interface. Specimens were characterized by synchrotron radiation imaging, triple-axis diffractometry and transmission electron microscopy (TEM). We found that the evaporation process under non-optimal conditions affected the dislocation structure. When the growth had been optimized, AlN layers showed a uniform distribution of dislocations. The dislocations tended to constitute low-angle subgrain boundaries, which produced out-of-plane and in-plane tilt angles of about 2–3 arc-min. Similar broadening was observed in both symmetric and asymmetric rocking curves, which proved the presence of edge, screws as well as mixed dislocation content. TEM revealed arrays of edge threading dislocations, but their predominance over the other threading dislocations was not supported by present study. To explain the experimental observations, a theoretical model of the dislocation structure formation is proposed.
An interesting feature in phase-contrast images of micropipes in silicon carbide in white synchrotron radiation beam was experimentally studied and theoretically explained. This feature consists in that a change in micropipe cross-section sizes does not lead to changes in its image sizes, but has an effect only on the contrast. The experiment was performed on the synchrotron radiation source in Pohang, South Korea. On the one hand, this effect is explained by a small phase progression caused by the micropipe, and, on the other hand, by satisfying the conditions for Fraunhofer diffraction, when the transverse micropipe size is smaller than the first Fresnel zone diameter. As a rule, the near-field conditions are satisfied in X-ray optics when only object edges are imaged. However, micropipes are so small that the standard edge theory is inapplicable. A universal intensity distribution profile was obtained for micropipes with very small cross sections.