In this paper, the features of catalytic cracking of propane with a step-wise change in the composition of the catalyst from Pr2Zr2O7 to Yb2Zr2O7 were considered. For the research, samples of catalysts Pr2Zr2O7, (Pr0.75Yb0.25)2Zr2O7, (Pr0.5Yb0.5)2Zr2O7, (Pr0.25Yb0.75)2Zr2O7 and Yb2Zr2O7 were synthesized and analyzed. Analysis of the results from catalytic experiments showed that for the catalyst (Pr0.25Yb0.75)2Zr2O7, at a temperature of 700 °C, the conversion of propane reaches values of 100%, but for Yb2Zr2O7, this indicator decreases to 84%. The selectivity for ethylene is consistently reduced from 85% to 28% in several catalysts (Pr0.75Yb0.25)2Zr2O7 > Pr2Zr2O7 > (Pr0.5Yb0.5)2Zr2O7 >(Pr0.25Yb0.75)2Zr2O7 > Yb2Zr2O7. An increase in the number of surface adsorption centers leads to a predominant rupture of the C–C bond in the propane molecule with the formation of ethylene. When ytterbium ions are introduced into the catalyst, the amount of ethylene in the reaction products decreases, but the selectivity for propylene increases in the series Pr2Zr2O7 < (Pr0.75Yb0.25)2Zr2O7 < (Pr0.5Yb0.5)2Zr2O7 < Yb2Zr2O7 < (Pr0.25Yb0.75)2Zr2O7, which is associated with a decrease in the binding energy of carbon atoms in propane with the catalytic center during adsorption.
The catalytic conversion of biomass-derived synthesis gas via the Fischer–Tropsch route represents a promising pathway for producing high-value products from renewable resources. This study investigates iron-containing complex oxides as catalysts for the conversion of model biomass-derived syngas. Ca-, Sr-, and Ba-doped GdFeO3 catalysts were synthesized via a sol–gel route and characterized by BET N2-physisorption, X-ray diffraction, and Fourier-transform IR spectroscopy. Their acid–base properties and oxygen non-stoichiometry were also investigated. Catalytic performance was evaluated in a fixed-bed reactor in two modes: hydrogenation of pure CO and of a CO + CO2 mixture simulating biomass-derived syngas. The results indicate that Ca, Sr, and Ba doping promotes oxygen-vacancy formation and an increase in the abundance of both acidic and basic surface sites. The effect of the promoter is not uniform with respect to activity and selectivity: Ca and Ba predominantly enhance CO and COx conversion, whereas 1% Sr primarily improves the selectivity toward light olefins at moderate conversion. All promoters suppress methane formation and enhance ethylene–propylene selectivity. Correlations are established between the surface acid–base characteristics and catalytic performance of the doped samples.