Droplet characteristics are identified as essential factors in agricultural spray application. The aims of this study were to analyse the influence of spray parameters on droplet characteristics and to determine possible candidate sprays that would produce the same droplet size categorizations as the American Society of Agricultural and Biological Engineers (ASABE) standard S-572.1 for air induction nozzles (AINs). Six different orifice sizes of the Billericay Farm Services (BFS) air induction (AI) flat fan hydraulic nozzles (the air bubblejet) were examined at different spray pressures (200 kPa, 300 kPa, 400 kPa, 500 kPa, 600 kPa and 700 kPa) and concurrent air velocities (2 m/s, 3 m/s, 4 m/s and 5 m/s). The influences of spray parameters on the droplet characteristics were analysed using analysis of covariance (ANCOVA) and analysis of variance (ANOVA). Results showed that: (1) The values of droplet characteristics and the results of ANOVA were significantly different before and after eliminate the influence of dynamic surface tension (DST) on droplet characteristics by ANCOVA; (2) (a) the reduction rates of the droplet diameter sizes decreased with increasing spray pressure; (b) air velocities of 2 m/s and 5 m/s resulted in smaller droplets reports, and air velocities of 3 m/s and 4 m/s are more suitable for agricultural spray applications; (c) a larger nozzle orifice size not always result in a larger droplet size and (3) Fine, Medium, Coarse, Very Coarse and Extremely Coarse droplet classification categories as the ASABE S-572.1 standard categorizations were determined to classify AINs.

Unmanned aerial vehicle (UAV) remote sensing platforms allow for normalized difference vegetation index (NDVI) values to be mapped with a relatively high resolution, therefore enabling an unforeseeable ability to evaluate the influence of the operation parameters on the quality of the thus acquired data. In order to better understand the effects of these parameters, we made a comprehensive evaluation on the effects of the solar zenith angle (SZA), the time of day (TOD), the flight altitude (FA) and the growth level of paddy rice at a pixel-scale on UAV-acquired NDVI values. Our results show that: (1) there was an inverse relationship between the FA (≤100 m) and the mean NDVI values, (2) TOD and SZA had a greater impact on UAV–NDVIs than the FA and the growth level; (3) Better growth levels of rice—measured using the NDVI—could reduce the effects of the FA, TOD and SZA. We expect that our results could be used to better plan flight campaigns that aim to collect NDVI values over paddy rice fields.

The brown rice plant hopper (BRPH), Nilaparvata lugens (Stal), is one of the most important insect pests affecting rice and causes serious damage to the yield and quality of rice plants in Asia. This study used bionic electronic nose technology to sample BRPH volatiles, which vary in age and amount. Principal component analysis (PCA), linear discrimination analysis (LDA), probabilistic neural network (PNN), BP neural network (BPNN) and loading analysis (Loadings) techniques were used to analyze the sampling data. The results indicate that the PCA and LDA classification ability is poor, but the LDA classification displays superior performance relative to PCA. When a PNN was used to evaluate the BRPH age and amount, the classification rates of the training set were 100% and 96.67%, respectively, and the classification rates of the test set were 90.67% and 64.67%, respectively. When BPNN was used for the evaluation of the BRPH age and amount, the classification accuracies of the training set were 100% and 48.93%, respectively, and the classification accuracies of the test set were 96.67% and 47.33%, respectively. Loadings for BRPH volatiles indicate that the main elements of BRPHs’ volatiles are sulfur-containing organics, aromatics, sulfur-and chlorine-containing organics and nitrogen oxides, which provide a reference for sensors chosen when exploited in specialized BRPH identification devices. This research proves the feasibility and broad application prospects of bionic electronic noses for BRPH recognition.

Review of precision rice hill-drop drilling technology and machine for paddy

Hyperspectral sensors, especially the close-range hyperspectral camera, have been widely introduced to detect biological processes of plants in the high-throughput phenotyping platform, to support the identification of biotic and abiotic stress reactions at an early stage. However, the complex geometry of plants and their interaction with the illumination, severely affects the spectral information obtained. Furthermore, plant structure, leaf area, and leaf inclination distribution are critical indexes which have been widely used in multiple plant models. Therefore, the process of combination between hyperspectral images and 3D point clouds is a promising approach to solve these problems and improve the high-throughput phenotyping technique. We proposed a novel approach fusing a low-cost depth sensor and a close-range hyperspectral camera, which extended hyperspectral camera ability with 3D information as a potential tool for high-throughput phenotyping. An exemplary new calibration and analysis method was shown in soybean leaf experiments. The results showed that a 0.99 pixel resolution for the hyperspectral camera and a 3.3 millimeter accuracy for the depth sensor, could be achieved in a controlled environment using the method proposed in this paper. We also discussed the new capabilities gained using this new method, to quantify and model the effects of plant geometry and sensor configuration. The possibility of 3D reflectance models can be used to minimize the geometry-related effects in hyperspectral images, and to significantly improve high-throughput phenotyping. Overall results of this research, indicated that the proposed method provided more accurate spatial and spectral plant information, which helped to enhance the precision of biological processes in high-throughput phenotyping.

Cloud cover hinders the effective use of vegetation indices from optical satellite-acquired imagery in cloudy agricultural production areas, such as Guangdong, a subtropical province in southern China which supports two-season rice production. The number of cloud-free observations for the earth-orbiting optical satellite sensors must be determined to verify how much their observations are affected by clouds. This study determines the quantified wide-ranging impact of clouds on optical satellite observations by mapping the annual total observations (ATOs), annual cloud-free observations (ACFOs), monthly cloud-free observations (MCFOs) maps, and acquisition probability (AP) of ACFOs for the Sentinel 2 (2017–2019) and Landsat 8 (2014–2019) for all the paddy rice fields in Guangdong province (APRFG), China. The ATOs of Landsat 8 showed relatively stable observations compared to the Sentinel 2, and the per-field ACFOs of Sentinel 2 and Landsat 8 were unevenly distributed. The MCFOs varied on a monthly basis, but in general, the MCFOs were greater between August and December than between January and July. Additionally, the AP of usable ACFOs with 52.1% (Landsat 8) and 47.7% (Sentinel 2) indicated that these two satellite sensors provided markedly restricted observation capability for rice in the study area. Our findings are particularly important and useful in the tropics and subtropics, and the analysis has described cloud cover frequency and pervasiveness throughout different portions of the rice growing season, providing insight into how rice monitoring activities by using Sentinel 2 and Landsat 8 imagery in Guangdong would be impacted by cloud cover.