Efficient and accurate fault diagnosis plays an essential role in the safe operation of machinery. In respect of fault diagnosis, various data-driven methods based on deep learning have attracted widespread attention for research in recent years. Considering the limitations of feature representation in convolutional structures for fault diagnosis, and the demanding requirements on the quality of data for Transformer structures, an intelligent method of fault diagnosis is proposed in the present study for bearings, namely Efficient Convolutional Transformer (ECTN). Firstly, the time-frequency representation is achieved by means of short-time Fourier transform for the original signal. Secondly, the low-level local features are extracted using an efficient convolution module. Then, the global information is extracted through transformer. Finally, the results of fault diagnosis are obtained by the classifier. Moreover, experiments are conducted on two different bearing datasets to obtain the experimental results showing that the proposed method is effective in combining the advantages of CNN and transformer. In comparison with other single-structure methods of fault diagnosis, the method proposed in this study produces a better diagnostic performance in the context of limited data volume, strong noise, and variable operating conditions.

Hyperspectral sensors, especially the close-range hyperspectral camera, have been widely introduced to detect biological processes of plants in the high-throughput phenotyping platform, to support the identification of biotic and abiotic stress reactions at an early stage. However, the complex geometry of plants and their interaction with the illumination, severely affects the spectral information obtained. Furthermore, plant structure, leaf area, and leaf inclination distribution are critical indexes which have been widely used in multiple plant models. Therefore, the process of combination between hyperspectral images and 3D point clouds is a promising approach to solve these problems and improve the high-throughput phenotyping technique. We proposed a novel approach fusing a low-cost depth sensor and a close-range hyperspectral camera, which extended hyperspectral camera ability with 3D information as a potential tool for high-throughput phenotyping. An exemplary new calibration and analysis method was shown in soybean leaf experiments. The results showed that a 0.99 pixel resolution for the hyperspectral camera and a 3.3 millimeter accuracy for the depth sensor, could be achieved in a controlled environment using the method proposed in this paper. We also discussed the new capabilities gained using this new method, to quantify and model the effects of plant geometry and sensor configuration. The possibility of 3D reflectance models can be used to minimize the geometry-related effects in hyperspectral images, and to significantly improve high-throughput phenotyping. Overall results of this research, indicated that the proposed method provided more accurate spatial and spectral plant information, which helped to enhance the precision of biological processes in high-throughput phenotyping.

Smart farming uses advanced tools and technologies such as intelligent agricultural machines, high-precision sensors, navigation systems, and sophisticated computer systems to increase the economic benefits of agriculture and reduce the associated human effort. With the increasing demands of individualized farming operations, the internet of things is a crucial technique for acquiring, monitoring, processing, and managing the agricultural resource data of precision agriculture and ecological monitoring domains. Here, an internet of things-based system scheme integrating the most recent technologies for designing a management platform for agricultural machines equipped with automatic navigation systems is proposed. Various agricultural machinery cyber-models and their corresponding sensor nodes were constructed in a pre-production phase. Three key enabling technologies—multi-optimization of agricultural machinery scheduling, development of physical architecture and software, and integration of the controller-area-network with a mobile network—were addressed to support the system scheme. A demonstrative prototype system was developed and a case study was used to validate the feasibility and effectiveness of the proposed approach.

A row-following system based on machine vision for a picking robot was designed in our previous study. However, the visual perception could not provide reliable information during headland turning according to the test results. A complete navigation system for a picking robot working in an orchard needs to support accurate row following and headland turning. To fill this gap, a headland turning method for an autonomous picking robot was developed in this paper. Three steps were executed during headland turning. First, row end was detected based on machine vision. Second, the deviation was further reduced before turning using the designed fast posture adjustment algorithm based on satellite information. Third, a curve path tracking controller was developed for turning control. During the MATLAB simulation and experimental test, different controllers were developed and compared with the designed method. The results show that the designed turning method enabled the robot to converge to the path more quickly and remain on the path with lower radial errors, which eventually led to reductions in time, space, and deviation during headland turning.

In order to enhance the efficiency of agricultural machinery in orchard rows and minimize harm to personnel caused by pesticide spraying, this study developed a GNSS-based (Global Navigation Satellite System) automatic navigation driving system for tracked orchard sprayers. The tracked sprayer was used as a platform for this research. We constructed both a crawler hydraulic platform and spraying working parts based on orchard operation requirements. Additionally, we designed the hydraulic and electrical sub-control process of the crawler platform. By utilizing the motion model of the tracked mobile platform, we designed a linear path tracking control method using position deviation and heading deviation as state quantities. This allows the research platform to automatically initiate and terminate, travel in a straight line between rows, and complete spraying operations. Experimental verification confirmed that the tracked sprayer designed in this study successfully achieves automatic driving. The best automatic driving performance is achieved at a speed of 1.0 m/s. When the sprayer’s speed is 1.2 m/s, the maximum value of the straight-line path tracking accuracy of the platform’s automatic driving is better than 5.6 cm, with a standard deviation of 2.8 cm. This system effectively meets the requirements of automatic operation for an automatic spraying machine, thereby establishing a foundation for the implementation of automatic spraying operations in orchards.