The UBC Brock Commons building in Vancouver, which comprises of 18 stories and stands 53 m in height, was at the time of completion in 2016 the world’s tallest hybrid wood-based building. The building’s 17 stories of mass-timber superstructure, carrying all gravity loads, rest on a concrete podium with two concrete cores that act as both the wind and seismic lateral load-resisting systems. Whereas the construction of the concrete cores took fourteen weeks in time, the mass-timber superstructure took only ten weeks from initiation to completion. A substantial reduction in the project timeline could have been achieved if mass-timber had been used for the cores, leading to a further reduction of the building’s environmental footprint and potential cost savings. The objective of this research was to evaluate the possibility of designing the UBC Brock Commons building using mass-timber cores. The results from a validated numerical structural model indicate that applying a series of structural adjustments, that is, configuration and thickness of cores, solutions with mass-timber cores can meet the seismic and wind performance criteria as per the current National Building Code of Canada. Specifically, the findings suggest the adoption of laminated-veneer lumber cores with supplementary ‘C-shaped’ walls to reduce torsion and optimize section’s mechanical properties. Furthermore, a life cycle analysis showed the environmental benefit of these all-wood solutions.

Wood has been gaining popularity as a building material over the last few decades. There has been significant progress in technology during this period to push the limits of wood construction. At the same time, it has become more economically competitive to build with wood beyond low-rises. As a result, there has been a noteworthy shift in public perception in terms of acceptance of wood as a material for high-rise buildings. There is a growing list of tall wood buildings that have been constructed in different continents over the last decade. With worldwide population growth and increased urbanization, the trend is expected to continue. Considerable urgency for using sustainable resources to tackle the threat of climate change has resulted in a surge in demand as well as applications in recent decades. This paper reviews the significant technical advances that have contributed to those achievements and are expected to facilitate further developments.

Soft-story wood-frame buildings have been recognized as a disaster preparedness problem for decades. There are tens of thousands of these multi-family three- and four-story structures throughout California and other cities in the United States. The majority were constructed between 1920 and 1970, with many being prevalent in the San Francisco Bay Area in California. The NEES-Soft project was a five-university multi-industry effort that culminated in a series of full-scale soft-story wood-frame building tests to validate retrofit philosophies proposed by (1) the Federal Emergency Management Agency (FEMA) P-807 guidelines and (2) a performance-based seismic retrofit (PBSR) approach developed within the project. Four different retrofit designs were developed and validated at full-scale, each with specified performance objectives, which were typically not the same. This paper focuses on the retrofit design using cross laminated timber (CLT) rocking panels and presents the experimental results of the full-scale shake table test of a four-story 370 m² (4000 ft²) soft-story test building with that FEMA P-807 focused retrofit in place. The building was subjected to the 1989 Loma Prieta and 1992 Cape Mendocino ground motions scaled to 5% damped spectral accelerations ranging from 0.2 to 0.9 g.

Post-tensioned cross-laminated timber (PT-CLT) walls have been demonstrated to be a low-damage seismic force-resisting system (SFRS) due to their self-centering capability. However, there is still a need to examine the seismic performance of such SFRS in high-seismic risk zones. This study evaluates the seismic performance of 6-, 9-, and 12-storey PT-CLT shear wall buildings in Vancouver, Canada, equipped with buckling-restrained axial fuses. The prototype buildings were designed using the displacement-based design method, and the assessment considered the most recent seismic hazard model provided in the 2020 National Building Code of Canada. To conduct nonlinear response history analysis (NLRHA) and incremental dynamic analysis (IDA), numerical models were developed in OpenSeesPy and calibrated based on component- and system-level experimental tests. The NLRHA and IDA results demonstrate that all the studied buildings have adequate collapse margin ratios, with less than a 10% chance of collapsing at the maximum considered earthquakes.