Tayyab Ahmed Qureshi

Mr. Tayyab Ahmed Qureshi

orcid

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
27 December 2023 in ACS Omega
Verified
Journal Article
Open access
TGTanveer A. Gadhi
Tanveer A. Gadhi
RMRasool Bux Mahar
Rasool Bux Mahar
TQTayyab Ahmed Qureshi
Tayyab Ahmed Qureshi
MBMuhammad Raheel Bawani
Muhammad Raheel Bawani
DKDanish A. Khokhar
Danish A. Khokhar
Barbara BonelliBarbara Bonelli
Barbara Bonelli
The textile wastewater sludge (TWS) treatment and disposal are environmentally challenging due to toxic organics and metals. At the same time, cattle manure (CM), with better combustion performance, i.e., calorific value and uniform burning capability, is still underutilized in many parts of the world. This study evaluated and assessed the TWS and CM blending compatibility to convert them into fuel pellets for the direct combustion option and to stabilize toxic contaminants in TWS. After initial drying, grinding, and particle size control of the raw TWS and CM, both were blended at different ratios. The blended and nonblended TWS and CM samples were converted into pellets and analyzed for proximate and ultimate analyses, namely, moisture content, fixed carbon, CHNO, gross calorific value (GCV), bulk density, ash content, and metals, to evaluate the efficacy for energy applications. Out of three blended ratios, i.e., 75:25 (W/W%; CM/TWS), 50:50, and 25:75, the 75:25 blended pellet composition was found appropriate for fuel application. For the 75:25 blend, the obtained GCV was 12.77 MJ/kg, elemental carbon was 27.5%, volatiles were 41.7%, and residue ash was 42.8% of the total weight. Moreover, the blending ratios of 75:25 and 50:50 revealed that elemental and metal (Fe, Cu, Zn, Ni, Cr, Na, Mg, Mn) concentrations in TWS were stabilized to below threshold limits in the obtained residue ash for safe handling. The explored methods of TWS and CM waste processing, blending, and pelletization proposed a new technique for their sustainable waste valorization into energy sources.

26 August 2023 in Minerals
Verified
Journal Article
Open access
PDF file
TQTayyab Ahmed Qureshi
Tayyab Ahmed Qureshi
TGTanveer A. Gadhi
Tanveer A. Gadhi
DKDanish Ahmed Khokhar
Danish Ahmed Khokhar
Imran AliImran Ali
Imran Ali
NMNajma Memom
Najma Memom
RMRasool Bux Mahar
Rasool Bux Mahar
The current study evaluated the use of pumice, a volcanic mineral and common sand, in treating reverse osmosis membrane reject water (ROR) using a novel combined adsorption distillation (CAD) method. The CAD method is developed to separate the dissolved solids through adsorption distillation, i.e., leaving the vaporized distillate as freshwater and concentrated brine. The adsorption potential of pumice and sand was investigated at different adsorbent doses, i.e., 2, 5, and 10 g, and consecutive CAD adsorbent backwashing cycles. The improved results were achieved at a 10 g pumice dose. However, its adsorption efficiency declined in longer CAD cycles, i.e., due to the separated deposition of solids. After backwashing, the adsorbed and accumulated salts were slightly removed, and pumice adsorption capacity was maintained for up to 20 cycles of CAD. The properties of the pumice, i.e., before and after five CAD cycles and after backwashing, were characterized with scanning electron microscopic (SEM), elemental disruptive spectroscopy (EDS), and X-ray diffraction (XRD), which revealed that the porous structure of the pumice was completely accumulated with deposits of ionic salts, which were slightly washed away after backwashing, but accumulation remained continued in post-CAD cycles. The explored method revealed a high potential of pumice in water filtration.

12 April 2023 in Catalysts
Verified
Journal Article
Open access
PDF file
TGTanveer A. Gadhi
Tanveer A. Gadhi
IBImtiaz Ali Bhurt
Imtiaz Ali Bhurt
TQTayyab Ahmed Qureshi
Tayyab Ahmed Qureshi
Imran AliImran Ali
Imran Ali
AQAnira Latif Qureshi
Anira Latif Qureshi
Barbara BonelliBarbara Bonelli
Barbara Bonelli
In this work, 3D-structured clay filters were prepared and coated with iron-doped titanium dioxide (Fe-TiO2) using 3D printing and sol–gel soaking and calcination techniques. Three-dimensional printing was employed to mold and shape the clay filters before annealing. The coated and uncoated filters were characterized for different properties, i.e., morphology, optical properties, and crystalline structure, using field emission scanning electron microscopy (FESEM), energy-dispersive X-ray spectroscopy (EDS), UV/Vis diffused reflectance spectroscopy (DRS), and X-ray diffraction (XRD). The FESEM images show uniform coatings of round-shaped Fe-TiO2 on the tiny pore of the clay filter. The optical energy band gap of the obtained coating was around 2.8 eV, estimated by Tauc’s plot, compared with 3.2 eV of pristine anatase TiO2. The XRD spectra data processed through XRD software revealed the coatings of TiO2 on the filter surface with the obtained phase of anatase. The photocatalytic performance of bare and coated filters was initially tested for the degradation of indigo carmine (IC) dye and the obtained results suggested the photocatalytic degradation of IC dye by the Fe-TiO2 clay filter compared with the bare filter. Afterward, the denitrification of nitrate NO3 at various concentrations was performed using Fe-TiO2-coated clay filters and analyzing the total nitrogen (TN) analysis and reduction of NO3 to nitrite (NO2−), nitrogen monoxide (NO), and nitrogen gas (N2). The TN analysis revealed up to 81% denitrification efficiency of the 30 ppm NO3 solution with the photocatalytic response of the Fe-TiO2-coated filter. The results revealed that the Fe-TiO2-coated clay filter has a high potential for denitrification applications under natural sunlight.