Muhammad Raheel Bawani

Muhammad Raheel Bawani

Auto-generated profile, based on publicly available information

Muhammad Raheel Bawani

Department of Mining Engineering, Mehran University of Engineering and Technology, Jamshoro, Pakistan

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
27 December 2023 in ACS Omega
Verified
Journal Article
Open access
TGTanveer A. Gadhi
Tanveer A. Gadhi
RMRasool Bux Mahar
Rasool Bux Mahar
TQTayyab Ahmed Qureshi
Tayyab Ahmed Qureshi
MBMuhammad Raheel Bawani
Muhammad Raheel Bawani
DKDanish A. Khokhar
Danish A. Khokhar
Barbara BonelliBarbara Bonelli
Barbara Bonelli
The textile wastewater sludge (TWS) treatment and disposal are environmentally challenging due to toxic organics and metals. At the same time, cattle manure (CM), with better combustion performance, i.e., calorific value and uniform burning capability, is still underutilized in many parts of the world. This study evaluated and assessed the TWS and CM blending compatibility to convert them into fuel pellets for the direct combustion option and to stabilize toxic contaminants in TWS. After initial drying, grinding, and particle size control of the raw TWS and CM, both were blended at different ratios. The blended and nonblended TWS and CM samples were converted into pellets and analyzed for proximate and ultimate analyses, namely, moisture content, fixed carbon, CHNO, gross calorific value (GCV), bulk density, ash content, and metals, to evaluate the efficacy for energy applications. Out of three blended ratios, i.e., 75:25 (W/W%; CM/TWS), 50:50, and 25:75, the 75:25 blended pellet composition was found appropriate for fuel application. For the 75:25 blend, the obtained GCV was 12.77 MJ/kg, elemental carbon was 27.5%, volatiles were 41.7%, and residue ash was 42.8% of the total weight. Moreover, the blending ratios of 75:25 and 50:50 revealed that elemental and metal (Fe, Cu, Zn, Ni, Cr, Na, Mg, Mn) concentrations in TWS were stabilized to below threshold limits in the obtained residue ash for safe handling. The explored methods of TWS and CM waste processing, blending, and pelletization proposed a new technique for their sustainable waste valorization into energy sources.

1 July 2025 in Mehran University Research Journal of Engineering and Technology
Verified
Journal Article
Open access
PDF file
MBMuhammad Raheel Bawani
Muhammad Raheel Bawani
WAWaqas Anjum
Waqas Anjum
SASikandar Almani
Sikandar Almani
AHAli Hassan
Ali Hassan
RRRamez Raja
Ramez Raja
NLNoor Muhammad Lashari
Noor Muhammad Lashari
The depletion of high-grade iron ore reserves has increased the need to process low-grade iron ores efficiently. This study focused on improving the iron grade of indigenous laterite ore located at Jhimpir (Thatta district), using gravity and magnetic separation techniques. Mineralogical analysis confirms the presence of goethite, hematite, quartz, calcite, and clay minerals. SEM-EDS mapping shows that silicon (Si) and aluminum (Al) are scattered on the surface of iron-bearing minerals. The stereomicroscopic images showed that the particles below 600 microns are well liberated, but aluminosilicate impurities remain finely interlocked into the iron-bearing minerals. Gravity separation increases the iron content to 53% with a recovery of 35%, while magnetic separation improves the iron content to 58% but with a lower recovery of 25%. The iron content improves further when both methods are used together, but the overall recovery remains low (less than 35%) due to fine impurities within the iron-bearing minerals. These methods are ideal for preliminary concentration, where the goal is to reject coarse gangue and achieve moderate enrichment before using more expensive flotation methods. This research provides valuable insights into optimizing beneficiation methods for the laterite ore. The findings can help develop efficient processes to upgrade low-grade iron ore, making it more suitable for industrial use.

18 July 2023 in Physicochemical Problems of Mineral Processing
Verified
Journal Article
Closed access
MBMuhammad Raheel Bawani
Muhammad Raheel Bawani
AAAli Ihsan Arol
Ali Ihsan Arol
GTGulsen Tozsin
Gulsen Tozsin
ATAbdulvahit Torun
Abdulvahit Torun
Oltu-stone, a semi-precious stone found in Erzurum's Oltu area, is commonly utilized in the creation of decorative ornaments. More than 90% of the Oltu-stone mined is classified as Oltu-stone waste, consisting of poor Oltu-stone due to mineral impurities and small fragment sizes (OW). This waste is thrown or burnt, resulting in financial losses. Such losses might be reduced by using Oltu-stone waste (OW) instead of standard Oltu-stone (SO). The purpose of this study was to convert Oltu-stone waste into a useful pressed product. It was cleaned using the float-sink method with a density of 1.25 g.cm-3 and then utilized for binderless high-pressure agglomeration to create pressed Oltu-stone. The physical, mechanical, microscopic, and spectroscopic characteristics of the material were investigated. The bulk density of pressed Oltu-stone was reported to be 1.22-1.26 g.cm-3. However, with the same pressing time, indirect tensile strength was identical and varied when the pressing time was changed. The surface morphology of the crushed Oltu-stone revealed that it was more intact and had a less porous structure. Oltu-stone includes a lot of volatile matter and aliphatic carbon structures because of its high liptinite content. An FTIR investigation revealed that altering the pressing time affects the chemical structure but not the pressure. This effect was seen in molecules containing oxygen, namely conjugated carbonyl and carboxylic groups. It was discovered that pressed Oltu-stone has nearly identical properties to standard Oltu-stone and could be produced on a large scale commercially.

1 January 2026 in Mehran University Research Journal of Engineering and Technology
Verified
Journal Article
Open access
ARAsad Rajput
Asad Rajput
SCSaleem Raza Chalgri
Saleem Raza Chalgri
MBMuhammad Raheel Bawani
Muhammad Raheel Bawani
ZSZeshan Sheikh
Zeshan Sheikh
RFRizwan Ullah Faiz
Rizwan Ullah Faiz
RRRashid Ayub Rajput
Rashid Ayub Rajput
The presence of low nutrient content in the lignocellulosic biomass, such as canola straw (CS), limits its anaerobic biodegradability. Therefore, the main focus of the study is to enhance the nutrient content during anaerobic digestion (AD) of CS. For this purpose, three different inoculum sources such as anaerobically digested manure (ADM), acclimatized sludge (AS), and mixed inoculum (MI), and different concentrations of laterite powder (2, 4, 6, 8, and 10%) were added to enhance the batch AD of CS. Results of the study revealed that the reactor inoculated with ADM performed better, and 15.23% and 10.31% higher biogas yields were observed from the reactors inoculated with AS and MI. Moreover, the 2% addition of laterite powder and ADM as inoculum produced the highest biogas yield of 602 NmL/gVS with a 76.4% VS reduction due to the synergistic effect. In addition, reactors showed better buffering capacity and stability in terms of volatile fatty acids to alkalinity ratios due to the addition of laterite powder during AD of CS. Furthermore, characterization of laterite revealed the presence of an iron source, which created the favourable environment for methanogenesis due to direct interspecies electron transfer (DIET). Biokinetic parameters revealed that the modified Gompertz model (MGM) reproduced the biogas production data. In conclusion, AD of CS may be enhanced by using good-quality inoculum and the addition of lateritic mineral. The addition of microbially active inoculums and laterite powder as a nutrient source may also enhance the anaerobic digestate quality and may be used as fertilizer.

5 January 2026 in ACS Omega
Verified
Journal Article
Open access
MBMuhammad Raheel Bawani
Muhammad Raheel Bawani
ARAsad Rajput
Asad Rajput
TGTanveer Ahmed Gadhi
Tanveer Ahmed Gadhi
ZSZeshan Sheikh
Zeshan Sheikh
KAKamran Ansari
Kamran Ansari
Barbara BonelliBarbara Bonelli
Barbara Bonelli
Open dumping and disposal of waste iron ore in freshwater and landfills are increasing environmental concerns. Therefore, following the environmental sustainability and circular economy approach, this study recovered iron-based coagulants from waste laterite ore (WLO) and assessed their performance in water treatment. Chemical leaching of WLO was performed using HCl with varying acid concentrations, temperatures, and treatment times. The optimum iron solubilization efficiency of 86% was achieved at an optimized HCl concentration of 13 mol/L, a reaction temperature of 90 °C, a mixing speed of 500 rpm, and a treatment time of 240 min. The recovered WLO-based iron coagulant exhibited a greenish color and showed promising performance in treating water from the River Indus Canal, particularly in removing turbidity and heavy metals. This performance of the WLO-based iron coagulant was nearly identical to that of conventional ferric chloride. Overall, recovering iron-based coagulants from WLO may reduce the cost of coagulating drinking water or wastewater. Furthermore, the present study’s findings will be useful in protecting the environment by either not discharging the WLO into freshwater bodies or by dry stacking.

1 July 2025 in Mehran University Research Journal of Engineering and Technology
Verified
Journal Article
Open access
PDF file
MBMuhammad Raheel Bawani
Muhammad Raheel Bawani
AAAli Ihsan Arol
Ali Ihsan Arol
GTGulsen Tozsin
Gulsen Tozsin
ATAbdulvahit Torun
Abdulvahit Torun
Oltu-stone, a semi-precious stone found in the Oltu district of Erzurum, Turkey, is frequently used in the making of decorative ornaments. Approximately 90-95% of the Oltu-stone mined, consisting of substandard Oltu-stone because of mineral impurities and small fragment sizes, is considered Oltu-stone waste (OW). This waste is either discarded or burned, resulting in economic losses. The utilization of Oltu-stone waste (OW) as an alternative to standard Oltu-stone (SO) could reduce such losses. In order to see if Oltu-stone waste can be used as an alternative to standard Oltu-stone, it must first be cleaned of its inorganic impurities. After that, the cleaned Oltu-stone properties should be determined to compare their characteristics with standard Oltu-stone. In this study, the petrographic and chemical characteristics of cleaned Oltu-stone obtained by dense medium separation (float-sink method) were determined. The results indicated that the cleaned Oltu-stone was liptinite-rich coal with a small amount of huminite content. Also, it shows contorted suberinite cellular structure and has varying resinite content. Due to high liptinite content, cleaned Oltu-stone has a high volatile matter, i.e., 63-65%. The inorganic impurities in the Oltu-stone wastes were mainly quartz, calcite, pyrite, and clay mineral. After cleaning, most inorganics were separated, although pyrite and silicate minerals remained in trace amounts within the cellular structure. The FTIR results show the predominance of aliphatic hydrocarbons, low aromaticity, and low apparent maturity. It was determined that the cleaned Oltu-stone wastes have similar characteristics to the standard Oltu-stone and can be utilized for further processing as an alternative source.