To fulfill the requirement of fields such as robotics, aviation, and special machining, motors with quill shafts or outer rotors have been used. For these special motors, the photoelectric encoder’s volume is normally too big and easy to be polluted by oil or dust; magnetic encoder normally has poor accuracy, and alnico piece may not provide enough magnetic field coverage area. The aim of this essay is to find a new structure of magnetic encoder to improve the precision and magnetic field coverage area. By using two multi-pole alnico rings with a different number of pole pairs to provide a magnetic field, the coverage area could be improved. The position differences between two alnicos pole positions are used to calculate absolute angle value, so the accuracy of the encoder could be absolute and no less than that of a combined magnetic encoder with the same number of pole pairs. A special algorithm is proposed for decoding. This new kind of magnetic encoder could be used on special motors with quill shafts or outer rotors. Its volume and weight are less than the photoelectric encoder and have better performance on antipollution. The alnico ring is easy to modify to suit the structure of the motor.
Magnetic encoders have widespread applications in various fields such as aerospace, automotive, robot joint control and machine tool turntables. For instance, obtaining accurate rotation angles of motors is crucial for servo motor control. Herein, we propose an angle-solving algorithm based on a dual-multipair pole magnetic encoder. First, we analyze the nonlinearity issue caused by installation error of the Hall signal and devise a self-adjustment algorithm for the analog signal. Second, we improve the high speed and robustness of the encoder in identifying eigenvalue intervals while solving for angles. Finally, through the big data analysis, the calibration compensation of curve fitting error was performed, and experiments were conducted to verify the effectiveness of the real-time angle-solving algorithm in a high-precision encoder.
The angular displacement sensor is used widely in robotics and other application fields. This paper proposes a new type of multifunctional angular displacement sensor. This angular displacement sensor design integrates two microcontroller units (MCUs) on a small printed circuit board (PCB). The first unit, which is designated MCU-A, transmits the absolute angle to the second unit, which is designated MCU-B, through Serial Peripheral Interface communication. In MCU-B, the absolute angle output is converted into incremental ABZ and UVW output using a table lookup angle conversion algorithm. The proposed encoder has various output types and a simple structure, is small in size, and can be manufactured at low cost. The device can be applied in a variety of industrial production scenarios.
18 December 2023 in IEEE Transactions on Instrumentation and Measurement
Magnetic encoders are widely used in aerospace technology, robot joints, machine tool turntables, and other equipment applications. Interval misjudgment is a problem that occurs during synthesis of multiple interval angles because of the effects of the working environment and the encoder’s power supply. This article proposes an approximate arctangent algorithm based on a combination of table lookup and interpolation to improve the speed at which the arctangent solution is calculated. Finally, a unique angle interval translation decoding method is proposed that can implement mechanical angle synthesis for split magnetic encoders. The algorithm’s performance is then confirmed experimentally.
In this study, a magnetic rotary displacement sensor is designed that consists of a concentric magnetic ring rotor, a displacement sensor main board responsible for displacement arithmetic, an AD sampling board responsible for synchronous acquisition, six external tunnel magneto resistance boards, and two sets of ferrite plug-in Hall modules. In the paper, the measurement errors caused by rotor dynamic eccentricity were analyzed, and a multi-sector complementary measurement model was established. The effectiveness of the suppression algorithm was theoretically proven. And a rotary displacement sensor angle segmentation algorithm is proposed that is based on three sets of magnetic field signals. The inner two circles consist of 7 pairs of poles and 11 pairs of poles of reciprocal magnetic field signals, and the decoding algorithm can be synthesized through the 12-bit mechanical angle. The mechanical angle signal synthesized in the inner circle is the reference angle signal, which is combined with the 256-pole-pair electrical angle signal of the outermost circle to subdivide the reference mechanical angle, and a high-resolution mechanical angle is obtained. Because of the synchronized sampling of the FPGA, six mechanical angles can be calculated in each cycle, and these six angles are symmetrical, so errors such as mounting or eccentricity can be reduced by averaging the six mechanical angles.
The accuracy and operational stability of a turntable system can be reduced by the backlash problem that occurs in the reducer’s gear transmission system. To solve this problem, this work proposes a scheme in which two motors are used to eliminate the effects of backlash through a linearization process. By calculating and outputting two independent torques synchronously from the two servo motors to the system output shaft’s gears, a nonlinear system with backlash can be transformed into a linear system without backlash, thus making the resulting system easy to control. Experiments verify that the system will remain stable after the movement of the output shaft stops.