12 May 2023 in IEEE Sensors Journal
Magnetic encoders have widespread applications in various fields such as aerospace, automotive, robot joint control and machine tool turntables. For instance, obtaining accurate rotation angles of motors is crucial for servo motor control. Herein, we propose an angle-solving algorithm based on a dual-multipair pole magnetic encoder. First, we analyze the nonlinearity issue caused by installation error of the Hall signal and devise a self-adjustment algorithm for the analog signal. Second, we improve the high speed and robustness of the encoder in identifying eigenvalue intervals while solving for angles. Finally, through the big data analysis, the calibration compensation of curve fitting error was performed, and experiments were conducted to verify the effectiveness of the real-time angle-solving algorithm in a high-precision encoder.
27 September 2023 in IEEE Sensors Journal
The angular displacement sensor is used widely in robotics and other application fields. This paper proposes a new type of multifunctional angular displacement sensor. This angular displacement sensor design integrates two microcontroller units (MCUs) on a small printed circuit board (PCB). The first unit, which is designated MCU-A, transmits the absolute angle to the second unit, which is designated MCU-B, through Serial Peripheral Interface communication. In MCU-B, the absolute angle output is converted into incremental ABZ and UVW output using a table lookup angle conversion algorithm. The proposed encoder has various output types and a simple structure, is small in size, and can be manufactured at low cost. The device can be applied in a variety of industrial production scenarios.
18 December 2023 in IEEE Transactions on Instrumentation and Measurement
Magnetic encoders are widely used in aerospace technology, robot joints, machine tool turntables, and other equipment applications. Interval misjudgment is a problem that occurs during synthesis of multiple interval angles because of the effects of the working environment and the encoder’s power supply. This article proposes an approximate arctangent algorithm based on a combination of table lookup and interpolation to improve the speed at which the arctangent solution is calculated. Finally, a unique angle interval translation decoding method is proposed that can implement mechanical angle synthesis for split magnetic encoders. The algorithm’s performance is then confirmed experimentally.
20 August 2025 in IEEE Sensors Journal
In this study, a magnetic rotary displacement sensor is designed that consists of a concentric magnetic ring rotor, a displacement sensor main board responsible for displacement arithmetic, an AD sampling board responsible for synchronous acquisition, six external tunnel magneto resistance boards, and two sets of ferrite plug-in Hall modules. In the paper, the measurement errors caused by rotor dynamic eccentricity were analyzed, and a multi-sector complementary measurement model was established. The effectiveness of the suppression algorithm was theoretically proven. And a rotary displacement sensor angle segmentation algorithm is proposed that is based on three sets of magnetic field signals. The inner two circles consist of 7 pairs of poles and 11 pairs of poles of reciprocal magnetic field signals, and the decoding algorithm can be synthesized through the 12-bit mechanical angle. The mechanical angle signal synthesized in the inner circle is the reference angle signal, which is combined with the 256-pole-pair electrical angle signal of the outermost circle to subdivide the reference mechanical angle, and a high-resolution mechanical angle is obtained. Because of the synchronized sampling of the FPGA, six mechanical angles can be calculated in each cycle, and these six angles are symmetrical, so errors such as mounting or eccentricity can be reduced by averaging the six mechanical angles.
5 March 2025 in IEEE Transactions on Instrumentation and Measurement
In the research into linear displacement sensors, the main research targets are optical grating and magnetic grating-based displacement sensors. However, magnetic grating and optical grating techniques are horizontal measurement methods, which basically require a sliding substrate, a read head, and other components. The resulting magnetic grating or optical grating-based displacement sensors are large in size and cannot realize displacement measurements in small space or vertical measurement scenarios. In this paper, a novel and highly accurate linear displacement sensor is designed for use in small space and vertical measurements that uses a completely different structure to conventional magnetic grating or optical grating-based displacement sensors. The proposed magnetic linear displacement sensor consists of two components: a moving shaft with nested magnets and a printed circuit board that does not need a moving substrate or a sliding guide. The proposed sensor offers a simple structure, small size, high measurement stability, and high environmental adaptability. The sensor has a completely new structure, and no similar structural design has been reported the current literature. A permanent magnet ring, an anti-oscillation interference structure, and a system circuit are designed in this the paper, and the possible oscillating interference, deterministic error, and random interference error characteristics of the sensor are analyzed. A linear displacement sensor decoding algorithm based on fuzzy transitions is designed based on the anti-oscillation structure: the corresponding anti-interference algorithm is added to it, and the effectiveness of the fuzzy transition decoding algorithm is then verified. Finally, an experimental platform is designed for nonlinear error calibration and swing error validation, and the performance specifications of the proposed displacement sensor are verified using this platform. The effect of oscillation error suppression is verified via oscillation experiments that confirm the robustness of the magnetic displacement sensor.
31 January 2024 in IEEE Transactions on Instrumentation and Measurement
In the above paper [1] , Fig. 5 is incorrect. The correct figure is as follows.