The vastly increased range of operating speeds and loads of Electric Vehicle (EV) traction motors, implies that the use of traditional Finite Element (FE) based Noise Vibration and Harshness (NVH) optimisation methodologies becomes challenging due to extensive computational loads. Thus, reduced-order analytical methodologies have become of crucial significance for fast decision-making at pre-design stages. In this work, a novel combination of analytical techniques is utilised, to formulate a multiphysics methodology for Electromagnetic NVH prediction of typical high-speed Surface-mounted Permanent Magnet Synchronous Machines (S-PMSMs). Calculation of the electromagnetic stresses in open-circuit conditions was performed using the 2-Dimensional (2D) Complex Permeance methodology. Vibroacoustic predictions were made using analytical expressions for an equivalent 2D representing the stator. Unlike traditional analytical methodologies, further refinements were implemented to improve the accuracy of the vibroacoustic calculations without sacrificing computational efficiency, through a set of force transformation techniques. These allowed for consideration of the tooth modulation and tangential excitation effects, which are typically neglected in similar studies. The methodology was applied on a 48-slot 8-pole S-PMSM with electromagnetic and vibroacoustic results validated numerically. A fast parametric study was performed on the design parameters for the optimisation of the generated force harmonics, achieving significant reductions in the sound power levels at specific frequencies.
Cam–tappet contacts are responsible for ~7.5% of the internal combustion engine’s (ICE) total frictional losses. The application of coatings can improve the tribological performance of these contacts. In this paper, the application of a WC-C coating as a novel approach for cam–tappets in comparison with DLC coating is investigated. The tribological performance of the coated contacts are evaluated by a novel model comprising combined implicit analytical and explicit numerical methods. This model considers the coupled tribo-dynamic behaviour whilst obtaining detailed tribological performance. The combined approach provides a computationally efficient platform. The results show that application of DLC or WC-C can improve the film thickness value by up to 41%. They can improve boundary friction, whilst increasing the viscous friction.