Stephen Bewsher

Dr. Stephen Bewsher

Advanced Simulation Technologies, AVL List GmbH, Graz, Steiermark, Austria
orcid

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
20 December 2021 in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
Verified
Journal Article
Open access
PDF file
RJRb Jivan
Rb Jivan
MEM Eskandarzade
M Eskandarzade
Stephen BewsherStephen Bewsher
Stephen Bewsher
MLMichael Leighton
Michael Leighton
Mahdi Mohammad-pourMahdi Mohammad-pour
Mahdi Mohammad-pour
SSS Saremi-Yarahmadi
S Saremi-Yarahmadi
Manufacturing processes are usually energy intensive, contributing to the global carbon dioxide emissions. Deep Drawing is one of the most common types of sheet metal forming processes with great potential for energy efficiency improvement. In this paper, the optimised combination of molybdenum disulphide (MoS2) and graphite is proposed as a solid lubricant to reduce the punching force and energy consumption of deep drawing process. Different mixtures of MoS2 and graphite are prepared and their tribological performance are measured using experimental tests on tribometer. In order to investigate the friction reduction rate in deep drawing process, finite element simulation of the drawing process is performed. Results show that friction reduction using proposed combination of lubricants has significant effect on punching force and would provide greater process efficiency.

16 August 2018 in Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering
Verified
Journal Article
Open access
Stephen BewsherStephen Bewsher
Stephen Bewsher
MLMichael Leighton
Michael Leighton
Mahdi Mohammad-pourMahdi Mohammad-pour
Mahdi Mohammad-pour
HRHomer Rahnejat
Homer Rahnejat
GOGuenter Offner
Guenter Offner
OKOliver Knaus
Oliver Knaus
Accurate simulation performs a crucial role in the design and development of new modern internal combustion engines. In the case of piston rings, simulations are used to effectively predict generated friction and power loss of proposed designs. These are consequences of viscous shear of a thin lubricant film, likewise boundary friction caused by direct interaction of piston rings with the cylinder liner/bore surface. The most commonly used model for determining boundary friction is that of Greenwood and Tripp. The model requires the pressure coefficient of boundary shear strength of asperities from the softer of the contacting surfaces as an input. This parameter needs to be measured. The paper describes the process of measurement using an Atomic Force Microscope (AFM), both for a dry surface and that wetted by the presence of a lubricant layer. For realistic results, the investigated specimen is a used, tested engine cylinder liner where boundary active lubricant additives are bonded to its surface as well as combustion products. This approach is as opposed to the previously reported works using new flat surfaces with base oil or partially formulated lubricants and has not been previously reported in the literature. The results show that for used cylinder liners, the measured boundary shear strength of asperities varies according to location along the stroke. Results are reported for the top dead centre, mid-stroke and bottom dead centre locations. The measurements are subsequently used with two-dimensional Reynolds solution for a top compression ring-liner contact, where it is found that accurate localised predictions of generated friction and power loss can be made instead of the usual average value approach reported in the literature.

11 January 2023 in Machines
Verified
Journal Article
Open access
PDF file
HQHarry Questa
Harry Questa
Mahdi Mohammad-pourMahdi Mohammad-pour
Mahdi Mohammad-pour
Stephanos TheodossiadesStephanos Theodossiades
Stephanos Theodossiades
CGColin Garner
Colin Garner
Stephen BewsherStephen Bewsher
Stephen Bewsher
GOGünter Offner
Günter Offner
This study presents a new flexible dynamic model for drive systems comprising lubricated bearings operating under conditions representative of electrified vehicle powertrains. The multi-physics approach importantly accounts for the tribological phenomena at the roller–race conjunction and models their effect on shaft-bearing system dynamics. This is achieved by embedding a non-linear lubricated bearing model within a flexible system level model; this is something which has not, to the authors’ knowledge, been reported on hitherto. The elastohydrodynamic (EHL) film is shown to increase contact deflection, leading to increased contact forces and total bearing stiffness as rotational speeds increase. Results show that for a 68 Nm hub motor operating up to 21,000 rpm, the input bearing EHL film reaches a thickness of 4.15 μm. The lubricant entrainment increases the roller–race contact deflection, causing the contact stiffness to increase non-linearly with speed. The contribution of the lubricant film leads to a 16.6% greater bearing stiffness at 21,000 rpm when compared to conventional dry-bearing modelling methods used in current multi-body dynamic software. This new methodology leads to more accurate dynamic response of high-speed systems necessary for the next generation of electrified vehicles.

13 October 2023 in Lubricants
Verified
Journal Article
Open access
PDF file
Stephen BewsherStephen Bewsher
Stephen Bewsher
GOGünter Offner
Günter Offner
This paper presents a transient mixed-lubrication hydrodynamic and gas flow simulation model for a piston ring pack for a four-stroke internal combustion engine. The analyses carried out compare two fuel types, hydrogen and gasoline, at a 2000 rpm low engine load (20%), as well as 3000 rpm low (20%) and high (100%) engine loads, to investigate the effects of the different fuels and loading conditions on the ring pack. In particular, the minimum oil film thickness at the top compression ring, the total ring friction of the ring pack, the friction power loss and the blow-by are studied. The simulation shows that, under the high load conditions at 3000 rpm, the hydrogen variant exhibits larger friction power losses, around a 200 W peak difference and larger blow-by throughout the expansion stroke of the engine cycle. A similar trend can be observed for the low loads, where larger friction power losses with peak differences of 30 W and 40 W for 2000 rpm and 3000 rpm, respectively, are observed. The blow-by results for the low load at 2000 rpm show a slight increase of approximately 22% more gas flow into the crankcase, while the 3000 rpm simulation shows a 50% increase in blow-by for the hydrogen variant at low load and a 40% increase at high load. The findings that are presented indicate that, although alternative fuel sources such as hydrogen are very attractive alternatives to fossil fuels such as gasoline, there can be unwanted side effects that could lead to the permanent damage of components through quicker wear or hydrogen embrittlement from the blow-by gas.

24 October 2020 in Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering
Verified
Journal Article
Open access
PDF file
RHRobin Hildyard
Robin Hildyard
Stephen BewsherStephen Bewsher
Stephen Bewsher
JWJack Walker
Jack Walker
JUJamal Umer
Jamal Umer
SSSina Saremi-Yarahmadi
Sina Saremi-Yarahmadi
GOGuenter Offner
Guenter Offner
Piston skirt to cylinder liner conjunctions are amongst the major contributors to frictional power losses of Internal Combustion Engines (ICEs). Efforts have been made to mitigate the frictional losses of these conjunctions by incorporating different technologies such as texturing and application of novel coatings. Any potential technology needs to provide adequate wear resistance as well as frictional reduction in order to be practically applicable. In this paper, the piston skirt of a gasoline engine is deposited by three different variants of Graphene Oxide (GO) coatings deposited using an Electro-Phoretic Deposition (EPD) method. Their tribological performance is benchmarked against uncoated steel and graphite coated aluminium skirts. These coatings are experimentally characterised in terms of asperity level friction, topography and wear resistance. The conjunction and system level performance of these coatings considering both boundary and viscous friction and system dynamics are then evaluated using a multi-physics tribo-dynamic model. Results show that by incorporating an appropriate GO coating, the frictional power loss of the piston skirt to cylinder liner conjunction can be improved by up to 14% whilst maintaining the wear resistance of the coating at the level of an uncoated steel surface.

3 July 2023 in Applied Sciences
Verified
Journal Article
Open access
PDF file
PAPanagiotis Andreou
Panagiotis Andreou
PSParivash Soleimanian
Parivash Soleimanian
Mahdi Mohammad-pourMahdi Mohammad-pour
Mahdi Mohammad-pour
Stephen BewsherStephen Bewsher
Stephen Bewsher
GOGünter Offner
Günter Offner
Cam–tappet contacts are responsible for ~7.5% of the internal combustion engine’s (ICE) total frictional losses. The application of coatings can improve the tribological performance of these contacts. In this paper, the application of a WC-C coating as a novel approach for cam–tappets in comparison with DLC coating is investigated. The tribological performance of the coated contacts are evaluated by a novel model comprising combined implicit analytical and explicit numerical methods. This model considers the coupled tribo-dynamic behaviour whilst obtaining detailed tribological performance. The combined approach provides a computationally efficient platform. The results show that application of DLC or WC-C can improve the film thickness value by up to 41%. They can improve boundary friction, whilst increasing the viscous friction.