Jianqiao Ma

Dr. Jianqiao Ma


Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
21 August 2023 in IEEE Transactions on Transportation Electrification
Verified
Journal Article
Closed access
JMJianqiao Ma
Jianqiao Ma
RZRuiqian Zhang
Ruiqian Zhang
XWXiangfei Wang
Xiangfei Wang
To cope with the environmental adaptability of roof insulators amid the expanding coverage of high-speed railways, it is crucial to assess the insulation performance of novel roof insulators before they are put into service. During the flashover test of a batch of novel roof insulators, it was observed that the outer sheath of the high-voltage (HV) hardware had experienced an abnormal breakdown. Based on this case, Firstly, based on the results of the sheath incision inspection, it was inferred that the breakdown may have been caused by bonding issues between the sheath and the HV hardware. Due to its advantage in detecting thin defects, ultrasonic testing was employed to identify that the breakdown was caused by an air gap at the interface between the HV hardware and the sheath. Additionally, the influence of the air gap on the electric field distribution was analyzed through electrical field simulation. Secondly, various gap sizes were constructed to investigate the impact of gap size variations on the electric field parameters. To ascertain the functional relationship between gap size and electric field parameters, a nonlinear regression equation with variable coupling was then established to obtain the functional relationship between gap size and electric field parameters using regression analysis. Subsequently, in order to reduce the probability of breakdown, a grading ring can be installed on the HV side. The influence of the installation of the grading ring on the electric field and flow field was analyzed using electrostatic and fluid-structure coupling simulations. The evaluation criteria for optimizing the grading ring were selected, including E 2 within the air gap, the maximum electric field strength ( E rmax ) on the surface of the grading ring, and the maximum stress value on the surface of the 1# shed. By comparing and analyzing the differences in these criteria using orthogonal experimental design, the dimensions of the grading ring were optimized. Finally, the feasibility and effectiveness of the grading ring were verified through power frequency flashover tests and lightning impulse tests.

31 August 2023 in IEEE Access
Verified
Journal Article
Open access
KLKang Liu
Kang Liu
YFYudi Fan
Yudi Fan
JMJianqiao Ma
Jianqiao Ma
YWYihu Wang
Yihu Wang
HXHao Xu
Hao Xu
The increase in bird populations along the Hexi Corridor has led to an increase in flashover faults on 330 kV transmission lines caused by bird droppings. To mitigate the issue of line tripping caused by bird droppings, it is necessary to analyze the distribution of the electric field near composite insulators during the process of bird droppings falling. A three-dimensional model, including the tower, bird droppings, and insulators, was created to assess the impact of bird droppings’ characteristics on the electric field near the insulators. Based on simulation results, a bird-proof cover was designed to modify the trajectory of the bird droppings’ path. The research found that when bird droppings are grounded and continuous, the most severe distortion of the residual air gap field occurs at a distance of 599.34 mm from the insulator axis. In the dynamic process of ungrounded and continuous bird droppings falling downward with a length less than 3200 mm, the electric field intensity in the residual air gap remains below 5.66 kV/cm outside the circular area centered at the insulator skirt with a radius of 740 mm. Based on the simulation results under both single-end grounded and ungrounded conditions of bird droppings, a bird-proof cover structure was devised to alter the location where bird droppings fall. After bird droppings fall along the edges of the bird-proof cover, the average electric field intensity between the bird droppings and the high-voltage terminal is maintained below 3.02 kV/cm. These research findings lay the foundation for subsequent fabrication of physical models of bird-proof covers.

15 February 2022 in IEEE Access
Verified
Journal Article
Open access
JMJianqiao Ma
Jianqiao Ma
XWXiangfei Wang
Xiangfei Wang
RZRuiqian Zhang
Ruiqian Zhang
ZQZhibin Qi
Zhibin Qi
WWWenwen Wang
Wenwen Wang
In this paper, three types of insulators with no crack, short crack, and long crack are taken as the research objects to evaluate the influence of the penetrating cracks on the 1 st sheath of the roof silicone rubber composite insulator of high-speed train on the flashover characteristics. The continuous voltage rising method is used to obtain the influence characteristics of the crack on the development process of the flashover arc. The constant voltage withstand method is adopted to compare the leakage current when the contamination degree is 0.1 mg/cm 2 . The test results demonstrate that the crack has no significant effect on the flashover voltage and flashover path, and the flashover arc can burn the edge of the crack. The peak leakage current of the three different tests ranges from 24 mA to 30 mA. Additionally, the development of leakage current can be divided into four stages: rising, continuous violence, falling, and oscillating. Moreover, the sequence of the apparent leakage current of the insulator is long crack insulator, short crack insulator, and the one with no crack. The acceleration of the rising stage of the leakage current increases with the increase in the crack length. Meanwhile, the sum of the time of the rising stage, continuous stage, and falling stage of the insulator with long crack is the smallest. The crack will distort the distribution of current density and the electric field intensity in the vicinity. The results can provide references for evaluating the influence of radial cracks at the edge of the sheath on the flashover characteristics and optimizing the design of the roof insulator sheath structure.

12 July 2024 in IEEE Access
Verified
Journal Article
Open access
WWWenzhuo Wang
Wenzhuo Wang
ZMZhenxiang Ma
Zhenxiang Ma
YFYudi Fan
Yudi Fan
JMJianqiao Ma
Jianqiao Ma
KLKang Liu
Kang Liu
HXHao Xu
Hao Xu
Recently, the number of birds along the 330kV transmission lines in the northwest region has gradually increased. The frequency of birds nesting and excreting on the towers has been steadily rising, with bird droppings increasingly becoming the primary factor causing bird-related tripping faults. A three-dimensional model of the tower cross arm, continuous bird droppings, and insulators was constructed to simulate and analyze the impact characteristics of bird droplet diameter, length, and relative position to insulators on the spatial electric field near the insulators. Experimental corrections were made, and based on simulation and experimental results, a bird-proof baffle was designed. Research results indicate that under conditions of single-ended grounding and suspended droplets of bird droppings, the average electric field strength at the lower end of the bird droppings and the grading ring was extracted to define the protective area against irregular-shaped bird droppings. After experimental validation, a correction coefficient of 1.4 was obtained based on the experimental results. A square protective baffle with a diversion function was designed based on simulation and experimental results. Bird droppings were placed at the baffle’s diversion groove, and the average electric field strength between the lower end of the bird droppings and the grading ring was consistently lower than the breakdown field strength of 2.98 kV/cm. The research results of this paper can serve as a basis for the subsequent designing of physical models of bird-proof baffles and prevention of bird-related flashover faults on V-type insulators.

25 November 2021 in IEEE Access
Verified
Journal Article
Open access
JMJianqiao Ma
Jianqiao Ma
LMLei Ma
Lei Ma
XWXiangfei Wang
Xiangfei Wang
ZQZhibin Qi
Zhibin Qi
ZSZhenlong Sun
Zhenlong Sun
In order to exercise control on the maximal intensity of electric field for the pantograph post insulators and fittings surface on high-speed trains, the finite element software COMSOL was applied to analyze the electric field distribution of post insulators in the presence and absence of the grading ring. According to the simulation results, the depth and degree of grading ring are the significant influencing factors in the distribution of electric field along the insulator surface and the surrounding air area. Based on these simulation results, the solid model was processed and the lightning impulse flashover voltage test was carried out. As indicated by the test results, the permissible lightning impulse voltage of 50% negative polarity exhibited a linear relationship with the depth value, while 50% of the permissible lightning impulse voltage generated with the addition of grading ring cover that was 70mm in depth satisfied the requirement of 170kV as specified in OV4 standard. Based on the results of simulation analysis and test, the parameters of the grading ring that can be applied in engineering works were identified in this paper, thus providing a reference for the adoption of the scheme to reduce the abnormal flashover frequency induced by the local high intensity electric field.

2 November 2024 in Journal of Real-Time Image Processing
Verified
Journal Article
Closed access
PDF file
XYXilai You
Xilai You
JMJianqiao Ma
Jianqiao Ma
GYGuangze Yang
Guangze Yang