One of the main technical problems faced during field-scale injections of iron microparticles (mZVI) for groundwater nanoremediation is related to their poor colloidal stability and mobility in porous media. In this study, a shear-thinning gel, composed of a mixture of two environmentally friendly biopolymers, i.e., guar gum and xanthan gum, was employed to overcome these limitations. The slurry rheology and particle mobility were characterized by column transport tests. Then, a radial transport experiment was performed to mimic the particle delivery in more realistic conditions. The gel, even at a low polymeric content (1.75 g/L), proved effective in enhancing the mobility of high concentrated mZVI suspensions (20 g/L) in field-like conditions. The high radius of influence (73 cm) and homogeneous iron distribution were achieved by maintaining a low injection overpressure (<0.4 bar). Based only on the information derived from column tests, the MNMs 2018 software (Micro- and Nanoparticle transport, filtration, and clogging Model-Suite) was able to predict the particle distribution and pressure build-up measured in the radial domain. Experimental and simulated results showed good agreement, thus proving that a simplified experimental-modeling procedure based on 1D column tests could be used to effectively upscale the slurry behavior to more representative scales, e.g., radial domains.

The complete removal of biorecalcitrant xenobiotics, including most notably the pharmaceutical pollutants, by advanced oxidation processes is often difficult to be reached in urban or industrial wastewater because of the high concentration of organic and inorganic scavengers that compete with the xenobiotics for the oxidizing species. This work investigates a coupled treatment train in which wastewater effluents are pretreated with a negatively charged loose nanofiltration (NF) membrane (HydraCoRe70, made up of sulfonated polyethersulfone) to enhance the removal of xenobiotics with the thermal Fenton process. Carbamazepine (CBZ), a drug prescribed mainly for epilepsy treatment, is used here as a model xenobiotic. After optimizing the conditions for separation and degradation, the NF–Fenton approach was applied to both synthetic wastewater and real samples to assess the overall efficiency of CBZ removal. The Fenton degradation of CBZ was drastically enhanced in nanofiltered samples, thanks to the removal by the membrane of nearly all organic matter that would otherwise consume the reactive oxidizing species (e.g., the hydroxyl radical). On the basis of a preliminary treatment cost analysis, it can be concluded that the combined process is potentially applicable to the treatment of several kinds of wastewaters (e.g., industrial ones) to favor the removal of biorecalcitrant contaminants. Key cost savings of NF–Fenton concern the lower amounts of Fenton reagents needed to degrade CBZ and (even more importantly) the decreased levels of acids and bases for pH adjustment before and after the oxidative process because of the lower buffer capacity of the NF permeate compared to feed wastewater, after the removal by the NF of many inorganic ions and most organic carbon.