In this article, a maiden attempt have been taken for the online detection of faults, classification of faults, and identification of the fault locations of a grid-connected Micro-grid (MG) system. A deep learning algorithm-based Long Short Term Memory (LSTM) network is proposed, for the first time, for the online detection of faults and their classifications of the considered MG system to overcome the issues that persist in the existing algorithms. Also, a combination of an LSTM network and feed-forward neural network (FFNN) with a back-propagation algorithm (BPA) is proposed to identify the exact locations of the faults since the identification of fault locations is more challenging than fault categorizations. To select a suitable deep learning network with multiple hidden layers for achieving the aforesaid objectives, a rigorous analysis has been done. To study the accuracy of the proposed techniques, different types of faults with different parameters are considered in this paper. An extensive simulation has been done in MATLAB/Simulink platform to study the performance of the system with the proposed techniques. To validate the effectiveness of the proposed techniques, the entire system is implemented in the real-time platform using the OPAL-RT digital simulator. Comparison has also been done for the results obtained using ANN and proposed techniques. The results show that the proposed techniques based on the deep learning network effectively detect, classify, and identify the location of different faults of an MG system with acceptable performances.

In recent modern power systems, the number of renewable energy systems (RESs) and nonlinear loads have become more prevalent. When these systems are connected to the electricity grid, they may face new difficulties and issues such as harmonics and non-standard voltage. The proposed study suggests the application of a whale optimization algorithm (WOA) based on a fractional-order proportional-integral controller (FOPIC) for unified power quality conditioner (UPQC) and STATCOM tools. These operate best with the help of their improved control system, to increase the system’s reliability and fast dynamic response, and to decrease the total harmonic distortion (THD) for enhancing the power quality (PQ). In this article, three different configurations are studied and assessed, namely: (C₁) WOA-based FOPIC for UPQC, (C₂) WOA-based FOPIC for STATCOM, and (C₃) system without FACTS, i.e., base case, to mitigate the mentioned drawbacks. C₃ is also considered as a base case to highlight the main benefits of C₁ and C₂ in improving the PQ by reducing the %THD of the voltage and current system and improving the systems’ voltage waveforms. With C₂, voltage fluctuation is decreased by 98%, but it nearly disappears in C₁ during normal conditions. Additionally, during the fault period, voltage distortion is reduced by 95% and 100% with C₂ and C₁, respectively. Furthermore, when comparing C₁ to C₂ and C₃ under regular conditions, the percentage reduction in THD is remarkable. In addition, C₁ eliminates the need for voltage sag, and harmonic and current harmonic detectors, and it helps to streamline the control approach and boost control precision. The modeling and simulation of the prepared system are performed by MATLAB/Simulink. Finally, it can be concluded that the acquired results are very interesting and helpful in the recovery to the steady state of wind systems and nonlinear loads, thereby increasing their grid connection capabilities.

In this paper, a novel hybrid Maximum Power Point Tracking (MPPT) algorithm using Particle-Swarm-Optimization-trained machine learning and Flying Squirrel Search Optimization (PSO_ML-FSSO) has been proposed to obtain the optimal efficiency for solar PV systems. The proposed algorithm was compared with other well-known methods viz. Perturb & Observer (P&O), Incremental Conductance (INC), Particle Swarm Optimization (PSO), Cuckoo Search Optimization (CSO), Flower Pollen Algorithm (FPA), Gray Wolf Optimization (GWO), Neural-Network-trained Machine Learning (NN_ML), Genetic Algorithm (GA), and PSO-trained Machine Learning. The proposed algorithm was modelled in the MATLAB/Simulink environment under different operating conditions, for example, with step changes in temperature, solar irradiance, and partial shading. The proposed algorithm improved the efficiency up to 0.72% and reduced the settling time up to 76.4%. The findings of the research highlight that PSO_ML-FSSO is a potential approach that outperforms all other well-known algorithms tested herein for solar PV systems.

Predictive maintenance is a system’s competency in distinguishing future scenarios where the machine is likely to fail and schedule repairs just prior to this happening. A heuristic technology to enable efficient predictive maintenance is digital twin technology. The development of a twin system between real-time machinery and the virtual world is made possible by digital twin technology, which is ideal for predictive maintenance. Induction motors, which are the core of industrial machinery, are sparsely represented in the digital twin domain. Therefore, this study created a digital twin of a squirrel cage induction motor, utilizing data-driven modeling and multiple physics, and integrated it with a custom predictive maintenance system. The purpose of this study is to implement digital twin technology for induction motors for fault diagnosis and predictive maintenance. This framework can extrapolate running parameters to presciently detect motor remaining useful lifetime as well as erratic fault diagnosis. The experimental setup for the 2.2 kW squirrel cage induction motor has been integrated into the digital workspace via the dSPACE MicroLabBox controller to allow frequent calibration and reference signal setup. The resultant digital framework deployed on MATLAB Simulink provided high accuracy without placing a great computational load on the processor. The proposed model’s commercial application may open the way for computational intelligence in Industry 4.0 adoption of induction motors.

Changes in climatic circumstances, as well as intermittency, which has a significant impact on the overall energy system output from renewable energy sources (RESs), require the development of control strategies for extracting the maximum power available from RESs. To accomplish this task, several techniques have been developed. An efficient maximum power point tracking (MPPT) technique should be utilized to guarantee that both wind-generation and PV-generation systems provide their full advantages. In this paper, a new MPPT approach with jellyfish search optimization (JSO) is developed; in addition, a unified power-quality conditioner (UPQC) is utilized to enhance the performance of the microgrid (MG) and to solve the power-quality issues for the sensitive load. The MG, which includes a photovoltaic (PV), a wind turbine, and a fuel cell battery, is examined and modeled for uniform and nonuniform wind speed and solar irradiance. A comparison between the developed algorithm and different maximum power tracking algorithms is presented. Additionally, four case studies are carried out to verify the effectiveness of the introduced UPQC in enhancing power-quality problems. The research outcome shows high performance from the developed algorithm when assessed with additional algorithms. MATLAB/Simulink software is utilized for the simulation of the wind, PV, and FC control systems. However, experiment validation tests are given under the same condition of PV irradiation to validate the simulation results. The experimental validation is executed by utilizing the PV module simulation model, threefold, 23 V/2A CO3208-1A with solar altitude emulator CO3208-1B board, and the results are compared to the simulation results.