The genus Gossypium has important ethnobotanical and economic value for Amazonian Native Communities (A.N.C.). However, little research has been undertaken on the distribution and genetic diversity of cotton populations maintained in the Peruvian rainforest. This work aims to present the first report on the genetic diversity of Gossypium spp. populations in the A.N.C. of the province of La Convención, Cusco-Peru. The methodology was based on exploring, collecting, identifying, and characterizing the Gossypium populations present in the A.N.C. Twenty-six descriptors were evaluated (9 quantitative and 17 qualitative), and with this information, distribution, correlation, and principal component (PC) analyses were carried out. As a result, plants of two species [G. barbadense L. (44 samples) and G. hirsutum L. (19 samples)], one variety [G. barbadense var. brasiliensis (75 samples)], and three previously unidentified variations (9 samples) were identified. Altogether, 147 samples were collected. G. barbadense var. brasiliensis, which was always found in association with other economic crops within an altitude range of 338 to 1086 m, was the most predominant (51%), distributed in eleven A.N.C. and always in small plots (up to 2 ha). G. barbadense L. was cultivated between 397 and 1137 m of altitude in eight A.N.C. in plots of up to 3 ha in marginal lands. G. hirsutum L., with a smaller distribution (13%), was found between 334 and 497 m of altitude in only three communities; this species is cultivated in marginal areas throughout the year. The variability found for the first two PCs when considering the quantitative and qualitative descriptors was high (74.7%) and moderate (48.2%), respectively. When combining all the descriptors, the analysis showed that the first two PCs accounted for 51.8% of the total variability of the data. The PCs of the two types of data and their combination confirmed that the three populations found were grouped. The nine undefined samples were close to or intermediate between the described ones, showing that these samples may be the result of spontaneous crosses; as such, these samples need to be better evaluated with other tools for further definition. The information obtained shows that in the A.N.C. of Cusco-Peru, there is variability conserved by the inhabitants, who have been able to maintain and use these genotypes, even from their Amazonian indigenous ancestry, and the environment has been able to generate variability among the species, as will be highlighted in future works.

The increasing global demand for metals, driven by technological progress and the energy transition, has led to an acceleration in the expansion of the mining and metallurgical industry, resulting in an increase in the generation of mine tailings. This waste, which is of heterogeneous composition and has high contaminant potential, represents significant environmental and social challenges, affecting soils, water, and the geotechnical stability of tailings. The accumulation of these mine tailings poses a problem not only in terms of quantity, but also in terms of physicochemical composition, which exacerbates their environmental impact due to the release of heavy metals, affecting ecosystems and nearby communities. This article reviews the potential of geopolymerization and 3D printing as a technological solution for the management of tailings, offering an effective alternative for their reuse as sustainable building materials. Alkaline activation of aluminosilicates facilitates the formation of N–A–S–H and C–A–S–H cementitious structures, thereby providing enhanced mechanical strength and chemical stability. Conversely, 3D printing optimizes structural design and minimizes material consumption, thereby aligning with the principles of a circular eco-economy and facilitating carbon footprint mitigation. The present study sets out to compare different types of tailings and their influence on geopolymer reactivity, workability, and mechanical performance. In order to achieve this, the study analyses factors such as the Si/Al ratio, rheology, and setting. In addition, the impact of alkaline activators, additives, and nanoparticles on the extrusion and interlaminar cohesion of 3D printed geopolymers is evaluated. These are key aspects of their industrial application. A bibliometric analysis was conducted, which revealed the growth of research in this field, highlighting advances in optimized formulations, encapsulation of hazardous waste, CO₂ capture, and self-healing geopolymers. The analysis also identified technical and regulatory challenges to scalability, emphasizing the necessity to standardize methodologies and assess the life cycle of materials. The findings indicated that 3D printing with tailings-derived geopolymers is a viable alternative for sustainable construction, with applications in pavements, prefabricated elements, and materials resistant to extreme environments. This technology not only reduces mining waste but also promotes the circular economy and decarbonization in the construction industry.

The fiber quality of cotton (Gossypium barbadense L.) native to the Peruvian Amazon region is one of the most versatile and essential natural fibers in the Peruvian textile industry. There is little information about the fiber quality traits of cotton genotypes native to the Peruvian Amazon region. This study investigated the fiber quality traits of Peruvian Pima cotton accessions native to the Amazon region of the La Convención Province, Cusco, Peru, to determine the lines with the greatest potential for improving fiber quality in cotton genetic breeding programs. A total of 14 cotton accessions with white fiber color, being 12 accessions of G. barbadense L. (Pima cotton) and two accessions of Gossypium sp. (unknown cotton), were analyzed. The fiber properties determined using the high volume instrument method included seven characteristics. All fiber properties were classified into five quality classes. The data on fiber quality properties were subjected to distribution, correlation, and canonical variable analysis. The results of fiber quality properties showed that the two accessions of Gossypium sp. (unknown cotton) can be promising options to be used as high‐quality fiber progenies in crop genetic breeding programs or can be cultivated by regional farmers for the purpose of producing cotton with high fiber quality. Future investigations could utilize other methods of fiber quality analysis and compare the fiber quality of these cotton accessions native to the Peruvian Amazon region with other cotton species grown worldwide to improve the understanding of Pima cotton fiber quality and its applicability in different contexts of the textile industries.

Phaseolus vulgaris L. (common bean) significantly contributes to the human diet due to its protein, vitamin and mineral contents, making it one of the major edible plant species worldwide. Currently, the genetic resources conserved in germplasm banks in Cuba have experienced a loss of viability, which makes their propagation difficult. Magnetically treated water has been used to improve the response of seeds and plants of different species. However, there is little experimental evidence on the cultivation of the common bean irrigated with magnetically treated water or its positive effects on seed germination recovery and its effects on physiological, anatomical and morphological characteristics. This study aims to evaluate the growth and development of common bean with magnetically treated water as an alternative to rejuvenate the seeds for organic agriculture. A two-group experimental design was used: a group of plants irrigated with water without a magnetic field and a group of plants irrigated with water treated with a magnetic field at induction in the range of 100 to 150 mT. There was an increase of 25% in the percentage of germination; the stomatal anatomical structures behaved normally; and the stem length, vigor index, leaf area and seed weight increased by 35, 100, 109 and 16%, respectively. The concentrations of chlorophyll a, chlorophyll b pigments and carbohydrates in the plants grown with magnetically treated water were also stimulated in relation to control plants with increments of 13, 21 and 26%, respectively. The technology employed in this study did not have negative effects on the plant nor did it affect the presence of structures or the net content of the assessed compounds. Its use in the cultivation of Phaseolus vulgaris L. might represent a viable alternative for the improvement of the plant in organic farming production.

One of the diseases with the greatest economic impact on coffee cultivation worldwide and particularly in Peru is coffee rust (Hemileia vastatrix). The search for sustainable control methods as disease management strategies in coffee cultivation is necessary. The objective of this research was to determine the effectiveness of five biopesticides based on lemon verbena (Cymbopogon citratus) for the control of rust applied in laboratory and field conditions to allow the recovery of coffee (Coffea arabica L. var. typica) in La Convención, Cusco, Peru. Five biopesticides (oil, macerate, infusion, hydrolate and Biol) and four concentrations (0, 15, 20 and 25%) were evaluated. The biopesticides were evaluated under laboratory conditions (light and dark) at different concentrations. The design used was completely randomized in a factorial scheme. The biopesticides were incorporated into the culture medium and inoculated with 400 uredospores of rust, and the germination percentage was evaluated. Under field conditions, the biopesticides at the same concentrations were evaluated for 4 weeks after application. Under these field conditions, the incidence, severity and area under the disease progress curve (AUDPC) of selected plants with a natural degree of infection were evaluated. In the laboratory, the results showed that all biopesticides were effective in reducing the germination of rust uredospores to values <1% of germination in relation to the control, which showed values of 61% and 75% in the light and dark, respectively, independent of the concentration used, with no significant differences between them. In the field, 25% oil promoted the best response with values <1% and 0% incidence and severity, respectively, in the first two weeks after application. The AUDPC for this same treatment showed values of 7 in relation to 1595 of the control. Cymbopogon citratus oil is an excellent biopesticide that can be used to control coffee rust.

In guava plants, production pruning can be performed twice a year, and the return of growth is dependent on the physiological responses that are altered by the different cultivation environments and adopted management. From this perspective, this study aimed to characterize the photosynthetic dynamics of guava plants influenced by different pruning and fruit thinning intensities during two growing seasons in the region of Currais, Piauí, Brazil. The plants were distributed in a randomized block design with a factorial arrangement (3 × 3 × 2) consisting of three pruning intensities (short, medium, and long) and three fruit thinning intensities (0, 10, and 20%) during two growing seasons. The data were subjected to a cluster analysis and canonical discriminant analysis to discriminate treatment groups based on the variables. Through a cluster analysis for the evaluated treatments, it was possible to split the two pruning seasons into five different groups clustered for the first pruning season and the second pruning season. The highest assimilation values were observed in the first pruning season and especially in plants that received short pruning with 0% fruit thinning, medium pruning with 10% and 20% fruit thinning, and long pruning with 10% fruit thinning. Through the graphic representation of the canonical discriminant analysis, the first two variables explained 93.40% of the total variance contained in the nine original variables. The highest means of ambient PAR, transpiration, leaf temperature, internal carbon, and ambient temperature were observed in the second pruning season and in plants that received short pruning with 10% and 20% fruit thinning, medium pruning with 0% and 20% fruit thinning, and long pruning with 0%, 10%, and 20% fruit thinning favors a higher photosynthetic accumulation in guava plants. We observed a multiplicity of responses; however, short pruning with 10% thinning should be considered for both seasons.