Ultrathin metal foils are essential for applications requiring miniaturization across modern industry. Nevertheless, it is challenging for conventional rolling mills and conventional rolling methods to reduce the thickness of single-layer foils to a scale approaching just a few micrometers. This difficulty arises from a range of inherent factors, including the elastic modulus, diameter of the rollers, resistance of rolled materials, and friction coefficient. To address these limitations, an accumulative pack rolling (APR) method has been developed in this work to fabricate ultrathin metal foils. Al foils down to ~2 µm have been successfully fabricated by using Al, Ta, and stainless steel (SS) as pack materials. The effects of the pack sheets on surface morphology, thickness reduction, and microstructural evolution were investigated. Key surface roughening behaviors, including ridging and particle-like surface roughening, were observed on the inner surface, which influences the roughening and thinning behavior of the target Al foils. This study also provides insights into surface roughening mechanisms, including rolling marks, ridging, and particle-like roughening, and demonstrates the critical role of pack sheet materials in controlling plastic instability, achieving uniform thickness reduction in ultrathin foils, and preventing severe deterioration of surface flatness during the APR process.
In this study, the stability of the {112} rolling texture component during asymmetric accumulative roll-bonding (AARB) was systematically investigated using a crystal plasticity finite element method (CPFEM) model. The CPFEM predictions showed that the plastic deformation was inhomogeneous along the thickness for all five asymmetric ratios (1.0, 1.2, 1.5, 0.83, and 0.66). To characterize the plastic deformation and texture evolution, through-thickness shear strain, slip-system shear strain, crystal rotation behaviour, pole figures, and the retained area fraction of the {1 1 2} texture component were analyzed. It was found that the asymmetric ratio, surface friction, and cutting-stacking pattern in AARB played a critical role in the preservation of initial {1 1 2}.
1 November 2025 in Journal of Physics: Conference Series
To fabricate high-performance ultrafine-grained materials, cryorolling has been extensively studied due to its ability to suppress dislocation recovery, effectively refine grains, and enhance material properties. In this study, a comparative investigation was conducted on pure nickel subjected to cryorolling and room-temperature rolling. The results revealed that, at a rolling reduction of 80%, the hardness of pure nickel increased from the initial 182 HV to 316 HV after cryorolling, whereas room-temperature rolling resulted in an increase to 288 HV. Transmission electron microscopy observations demonstrated that cryorolling induced a greater degree of local misorientation compared to room-temperature rolling. After cryorolling, pure nickel exhibits a dense network of nanoscale substructures, primarily attributed to high dislocation density and substantial deformation-induced stored energy, which are identified as the key factors contributing to its superior hardness.
In this study, the through-thickness texture of an accumulative roll-bonding (ARB)-processed aluminum single crystal was characterized using the Electron Backscatter Diffraction (EBSD) technique, and the texture reversal during ARB was investigated. Partitioned crystal rotation about the transverse direction (TD) and the activation of two sets of slip systems that resulted in TD-rotation and slip traces were evidenced. Reduced TD-rotation in certain layers of 2-ARB and 3-ARB corresponded to the destruction of previously formed slip traces, which resulted from the activation of the other set of slip systems. The partial texture reversal in ARB was experimentally revealed for the first time, and the revealing of texture evolution mechanisms helps with texture tailoring for better formability of ARB-processed sheet metals.
The grain refinement of high-stacking-fault-energy metals during high-pressure torsion (HPT) is governed by dislocation activity and boundary evolution. However, how local misorientation evolves during different stages of grain refinement remains insufficiently clarified. In this study, AA1050 aluminium was processed by HPT to selected equivalent strains of 0, 0.90, 2.69, 10.76 and 53.78, and electron backscatter diffraction (EBSD) was used to analyse grain morphology, boundary fractions and EBSD-derived misorientation parameters. The results reveal strongly stage-dependent grain refinement during HPT. The average grain size decreases rapidly from 12.63 μm in the initial state to 3.29 μm at ε = 0.90 and 2.19 μm at ε = 2.69, remains nearly unchanged at ε = 10.76, and finally decreases to 0.58 μm at ε = 53.78. The fraction of low-angle grain boundaries increases markedly at ε = 0.90, indicating intensive formation of dislocation substructures, whereas high-angle grain boundaries become dominant at high strain. Grain orientation spread (GOS) and grain reference orientation deviation (GROD) exhibit non-monotonic evolution, whereas the geometrically necessary dislocation (GND) density increases markedly at the early deformation stage and subsequently decreases with further deformation. These results indicate that the stage-dependent grain refinement of AA1050 during HPT is closely associated with dislocation-mediated grain subdivision involving alternating grain elongation and fragmentation.
The uniform-field Taylor model, mean-field visco-plastic self-consistent (VPSC), and full-field crystal plasticity finite element method (CPFEM) are three typical and inherently different crystal plasticity (CP) models. In this report, these three CP models were realized within the CPFEM framework via Submodel modeling techniques. In the full-constraint Taylor model, the strain history from the Wholemodel was applied to all finite element method (FEM) nodes, while the strain from the Wholemodel was placed only on the boundaries of the Submodel in the VPSC model. The predicted textures with the Taylor, VPSC, and CPFEM models were compared, and the rolling textures at macroscopic scale were acceptably captured, and the micro-bands were also predicted by the CPFEM and VPSC. Finally, the contribution and limitations of this integrated modeling method were discussed.