In this study, machine hammer peening (MHP) was employed to enhance the surface properties of CuSn12 alloys, and the effects of different impact energies on the surface morphology, mechanical properties, and electrochemical properties were systematically investigated. The results revealed that the surface morphology evolution after MHP treatment exhibited unique non-monotonic characteristics, which significantly differed from the surface effects of conventional shot peening technology. Microhardness tests indicated that the surface hardness increased by 40% to approximately 150 HV after treatment with 3.5 J impact energy. Friction and wear tests demonstrated that specimens treated with 2.7 J impact energy exhibited optimal wear resistance, with an 82.7% reduction in volume wear loss, and the wear mechanism transformed from composite wear to mild fatigue wear. Electrochemical performance tests showed that corrosion resistance continuously improved as the impact energy increased from 2.7 J to 3.5 J, primarily attributed to grain refinement and passive film formation; however, treatment with 1.7 J impact energy resulted in decreased corrosion resistance. The results demonstrate that optimizing MHP process parameters can significantly enhance the overall properties of CuSn12 alloys, providing a novel technical approach for the surface-strengthening of this alloy.
Ultrathin metal foils are essential for applications requiring miniaturization across modern industry. Nevertheless, it is challenging for conventional rolling mills and conventional rolling methods to reduce the thickness of single-layer foils to a scale approaching just a few micrometers. This difficulty arises from a range of inherent factors, including the elastic modulus, diameter of the rollers, resistance of rolled materials, and friction coefficient. To address these limitations, an accumulative pack rolling (APR) method has been developed in this work to fabricate ultrathin metal foils. Al foils down to ~2 µm have been successfully fabricated by using Al, Ta, and stainless steel (SS) as pack materials. The effects of the pack sheets on surface morphology, thickness reduction, and microstructural evolution were investigated. Key surface roughening behaviors, including ridging and particle-like surface roughening, were observed on the inner surface, which influences the roughening and thinning behavior of the target Al foils. This study also provides insights into surface roughening mechanisms, including rolling marks, ridging, and particle-like roughening, and demonstrates the critical role of pack sheet materials in controlling plastic instability, achieving uniform thickness reduction in ultrathin foils, and preventing severe deterioration of surface flatness during the APR process.