This literature review examined the functionality of the connection or connections and disassembly as a general strategy. The prerequisites that arose for disassembly were, among other things, damage tolerance, reduction of emissions compared to raw materials, costs, and guaranteeing safety. The set of criteria for disassembly was defined from the structural engineers’ perspective through the literature review. The criteria focus on joints, which are key to the success of disassembly. Five different criteria were used to evaluate joints in this study. The criteria were ease of access to components, ease of disassembly, independence, simplicity, and standardization. The evaluation was executed for different widely used connections in timber constructions. The criteria were evaluated subjectively from one to four. As a conclusion, the load-bearing timber elements have a promising future in design for disassembly. Design for disassembly aims to promote reuse and other features to increase the life cycle of structural elements. It has the potential to reduce the usage of raw materials and significantly decrease the emissions of construction.
Major developments in hardware and software enable researchers and engineers to apply non-linear finite-element analyses to study the behavior of tubular structures. However, to provide reasonable results, constructed finite element models should be verified and validated with experimental data. This article develops a finite element model for high strength steel rectangular hollow section T joints. The joints are considered under in-plane bending moment and axial brace loading. The paper determines the most suitable finite elements and the number of layers in the thickness direction for the numerical assessment of initial stiffness and modeling the whole action-deformation behavior of joints. Finally, the proposed FE model is validated with the series of experimental tests. The validation shows that the developed model properly captures the local behavior of tubular joints and can efficiently serve as a reliable tool in routine numerical analyses.
To date, the share of research, teaching materials, and practices related to the use of timber in bridge projects in Finland are quite limited compared to other materials, such as concrete. This article, which also includes a structural design example for dimensioning a girder bridge, focuses on the status, applications and prospects of wood use in bridge construction, reflecting the Finnish professionals’ point of view. Key findings highlighted that: (1) the ideal use of wood would be in private road bridges and light traffic bridges; (2) while the use of wood in the bridge was assessed to be advantageous in terms of ecology, aesthetics, and environmental friendliness, it was reported to be disadvantageous in terms of long-term durability and connection details; (3) concrete and steel, whose prices fluctuate, could gradually be replaced by wood, a renewable material; (4) timber-concrete composite bridges were expected to become widespread in the future; (5) cross-laminated timber (CLT) could open up an opportunity for bridge decks; and (6) service limit state is often decisive for the dimensioning of wooden bridges. It is recommended to implement large-scale public projects for the wooden bridges by creating sustainable business models that will be supported both legitimately and economically by the local government. In this sense, close cooperation between authorities and other key market stakeholders is crucial.
Recent design guides include charring models for cross-laminated plane timber (CLT) members. When the bond line integrity is not maintained, charring is illustrated as a combination of sequenced phases. Significant research has been conducted on the charring behaviour of CLT panels, and the criterion of 300 °C has been an accepted definition for the char front line. The charring rate of a solid wood-based panel is determined by the char depth divided by the time to reach the char depth. In the CLT structure, this method can be applied to the first lamella layer. However, due to the char fall-off, it cannot be directly applied to the lamella layers behind the first layer. In this research, eight fire tests were conducted to investigate how charring rates of different lamella layers can be determined from measured temperatures. An assessment method based on the mean char depth development determined from experimental temperature distributions of CLT panels is introduced. Also, the effects of thermocouple positioning and specimen orientation on the assessment results were analysed. The charring rates determined for both horizontal and vertical specimens align well with the results calculated using the European Charring Model and a post-protection factor k3 of 2.
1 July 2000 in Communications in Numerical Methods in Engineering