Electric vehicles (EVs) are expected to take over the transportation and mobility market over traditional internal combustion engine (ICE) vehicles soon. The internal power demands of EVs are expected to increase. The reason for this is to achieve a longer driving range for the EV and to provide the required power for the low-voltage (LV) network auxiliary loads. To illustrate, there are extra added sensors, cameras, and small actuating motors, especially for future autonomous vehicles. Therefore, a new electrical/electronic (E/E) architecture is required to convert the high-voltage (HV) traction battery voltage (e.g., 320–800 V DC) to the standard LV levels with high current ratings of 5 kW and more. This HV-LV DC-DC converter is known in the literature as an auxiliary power module (APM). The standard LV rails in an EV are the 12 V/24 V rail to supply for an instant the EV’s lighting and electronic control units (ECUs), while the 48 V rail is required for propulsive loads, such as air compressors and electric power steering systems. Furthermore, in a few applications, this converter is responsible for voltage upwards to support the start of a hybrid vehicle or emergency backup power handling, which requires bidirectional capability. Therefore, in this paper, possible APM topologies for EV applications are presented. In line with this, the main standards and safety requirements of the APMs are presented. Detailed quantitative and qualitative comparisons between topologies and their associated control schemes are discussed. In addition, the placement of the APM in the EV cooling cycle has been investigated and demonstrated. Finally, the industrial trends and future research targets for the APM in automotive applications are outlined.
Auxiliary power demand in battery electric vehicles continues to increase as manufacturers transition toward multi-low-voltage architectures that combine 48 V and 12 V buses to improve load distribution flexibility and overall system efficiency. This paper evaluates several auxiliary power module (APM) architectures in terms of scalability, efficiency, complexity, size, and cost for supplying two low-voltage buses (e.g., 48 V and 12 V) from the high-voltage battery. Based on this assessment, a cascaded APM configuration is adopted, consisting of an isolated dual active bridge (DAB) converter followed by a non-isolated synchronous buck converter. A multi-objective optimization framework based on the NSGA-II algorithm is developed for the DAB stage to maximize efficiency and power density while minimizing cost. The optimized 13 kW DAB stage achieves a peak efficiency of 95% and a power density of 4.1 kW/L. For the 48 V/12 V buck stage, a 2 kW commercial GaN-based converter with a mass of 0.5 kg is used as the reference design, achieving a peak efficiency of 96.5%. Dedicated PI controllers are designed for both the DAB and buck stages using their respective small-signal models to ensure tight regulation of the two LV buses. The overall system stability is verified through impedance-based analysis. Experimental validation using a DAB prototype integrated with a multi-phase buck converter confirms the accuracy of the DAB loss modeling used in the design optimization framework as well as the control design implemented for the cascaded converters.