Amin Dalir

Mr. Amin Dalir

orcid

Research Focus & Metrics

Academic Career Length

1Year (2026-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
Verified
Journal Article
Open access
PDF file
Shahid JamanShahid Jaman
Shahid Jaman
ADAmin Dalir
Amin Dalir
Thomas GeuryThomas Geury
Thomas Geury
MBMohamed El Baghdadi
Mohamed El Baghdadi
Omar HegazyOmar Hegazy
Omar Hegazy
This paper presents a distributed V2G-enabled multiport DC charging system with a hierarchical charging management strategy. Unlike conventional architectures based on centralized power converter cabinets, the proposed system distributes bidirectional power converters within individual multiport dispensers, each equipped with a local charging power management device. This architecture improves system scalability, fault tolerance, and operational flexibility while enabling vehicle-level charging and V2G services. A hierarchical control framework is introduced, consisting of high-level optimal charging scheduling, mid-level power coordination among distributed dispensers, and low-level converter control. Key elements include modular power units that can be dynamically configured and expanded, providing a cost-effective and adaptable solution for growing EV markets. Experimental results obtained from a 45 kW modular DC charging prototype demonstrate an efficiency improvement of up to 2% at rated power compared to a non-modular charger. In contrast, the optimized charging strategy achieves an overall charging cost reduction of approximately 11% and a peak load demand reduction of up to 31%. Furthermore, stable bidirectional power flow, effective power sharing, and total harmonic distortion within regulatory limits are experimentally validated during both charging and V2G operation. The prototype is implemented to validate the proposed charging system in the laboratory environment.

15 January 2026 in Energies
Verified
Journal Article
Open access
PDF file
Ramy Kotb MohamedRamy Kotb Mohamed
Ramy Kotb Mohamed
ADAmin Dalir
Amin Dalir
Sajib ChakrabortySajib Chakraborty
Sajib Chakraborty
Omar HegazyOmar Hegazy
Omar Hegazy
Auxiliary power demand in battery electric vehicles continues to increase as manufacturers transition toward multi-low-voltage architectures that combine 48 V and 12 V buses to improve load distribution flexibility and overall system efficiency. This paper evaluates several auxiliary power module (APM) architectures in terms of scalability, efficiency, complexity, size, and cost for supplying two low-voltage buses (e.g., 48 V and 12 V) from the high-voltage battery. Based on this assessment, a cascaded APM configuration is adopted, consisting of an isolated dual active bridge (DAB) converter followed by a non-isolated synchronous buck converter. A multi-objective optimization framework based on the NSGA-II algorithm is developed for the DAB stage to maximize efficiency and power density while minimizing cost. The optimized 13 kW DAB stage achieves a peak efficiency of 95% and a power density of 4.1 kW/L. For the 48 V/12 V buck stage, a 2 kW commercial GaN-based converter with a mass of 0.5 kg is used as the reference design, achieving a peak efficiency of 96.5%. Dedicated PI controllers are designed for both the DAB and buck stages using their respective small-signal models to ensure tight regulation of the two LV buses. The overall system stability is verified through impedance-based analysis. Experimental validation using a DAB prototype integrated with a multi-phase buck converter confirms the accuracy of the DAB loss modeling used in the design optimization framework as well as the control design implemented for the cascaded converters.