The paper is a review on the extraction processes of cellulosic fibers from flax and hemp. The two lignocellulosic crops have a long history of use by humans for extraction of the bast fibers among other purposes. The utility of bast fibers declined over time with industrial advances and changes to the economy, but of late, with an increase of focus on environmental impact and sustainability, there is a renewed interest in these resources. The use of biomass-based resource requires an appreciation of plant anatomy and the agronomical variables in their cultivation and harvesting. This review provides an overview of these aspects as well as of the processes of retting for initial weakening of the plant structure in preparation for fiber extraction, degumming to isolate fiber bundles, and delignification.

Natural fibre reinforced plant structures are widely used in nature. These plant structures combine light weight with superior mechanical properties. The fibre orientations in plants are optimized to the occurring forces, especially to the bending of plants by wind forces. Therefore it is important to study the effect of fibre orientation to the mechanical properties of materials in a systematic experimental approach. In this study the effect of reinforcement fibre orientation on mechanical properties of bio-based lyocell-reinforced polypropylene composite was analysed. For this purpose, special technique to produce composites with defined fibre orientation and fibre wetting was developed consisting of the production of intermingled hybrid yarn followed by defined yarn laying and thermoforming processes. The formed composites were subjected to tensile strength tests and dynamic mechanical analyses. The experimentally determined E-modulus was compared with values, calculated from the modified rule of mixture of Virk and Krenchel. The analysis showed that the experimental E-moduli were somewhat smaller than the theoretical values, which is indicative of a less than perfect interfacial bonding between the fibres and matrix. The influence of water on the composite performance was also analysed. It was shown that the composites sorb approximately 30% water by weight, and it has a strong influence on the E-modulus and other performance parameters.

The interaction of Cl with Pt(110) was studied in UHV by scanning tunneling microscopy, low-energy electron diffraction, temperature-programmed desorption, and DFT calculations. Up to half a monolayer (ML) of Cl forms an adsorbate structure. Compression to higher local coverages leads to erosion of Pt atoms from the top layer and formation of PtCl₄ pentamers. Annealing results in healing of the Pt defects and formation of a long-range-ordered PtCl₄/Cl/Pt(110) adlayer that is remarkably similar to the adlayer structure found after deposition of [PtCl₄]²⁻ from an electrolyte onto Au(100). Coadsorption of 0.5 ML of Cl with CO initiates PtCl₄ formation, but no volatile compounds are formed under these conditions. In similar experiments with Br, the original Pt surface is left intact, even if Br is compressed to local coverages of 0.75 ML, in agreement with the expected lower corrosion activity of Br.

First-order phase transitions typically exhibit a significant hysteresis resulting for instance in boiling retardation and supercooling. The hysteresis arises, because nucleation of the new phase is activated. The free-energy change is positive until the nucleus reaches a critical size beyond which further growth is downhill. In practice, the barrier is often circumvented by the presence of heterogeneous nucleation centres, e.g. at vessel walls or seed crystals. Recently, it has been proposed that the homogeneous melting of ice proceeds via separation of defect pairs with a substantially smaller barrier as compared to the mere aggregation of defects. Here we report the observation of an analogous mechanism catalysing a two-dimensional homogeneous phase transition. A similar process is believed to occur in spin systems. This suggests that separation of defect pairs is a common trigger for phase transitions. Partially circumventing the activation barrier it reduces the hysteresis and may promote fluctuations within a temperature range increasing with decreasing dimensionality.