Dispersive magnetic solid-phase extraction (DMSPE) has received growing attention for sample treatment preconcentration prior to the separation of analytes due to its many advantages. In the present work, the potential of DMSPE for the determination of emergent mycotoxins (enniatins A, A1, B and B1, and beauvericin) is investigated for the first time. Different magnetic nanoparticles were tested and a magnetic multiwalled carbon nanotube (Fe3O4@MWCNT) composite was selected for the extraction and preconcentration of the five target mycotoxins in human urine samples before their analysis by ultrahigh performance liquid chromatography coupled to high resolution mass spectrometry (UHPLC-HRMS). The nanocomposite was characterized by energy dispersive X-ray spectrometry, scanning electron microscopy, Fourier transform infrared spectrophotometry, and X-ray diffraction. Several parameters affecting the adsorption and desorption of DMSPE steps were optimized and the method was fully validated. Due to a matrix effect, matrix-matched calibration curves were necessary to carry out quantification. In this way, limits of quantification of between 0.04 and 0.1 μg/L, relative standard deviation values lower than 12% and recoveries between 89.3% and 98.9% were obtained. Finally, a study of the reuse of the Fe3O4@MWCNT composite was carried out, confirming that it can be reused at least four times.
An analytical procedure is proposed for determining three cyanotoxins (microcystin RR, microcystin LR, and nodularin) and two phycotoxins (domoic and okadaic acids) in seawater and algae-based food supplements. The toxins were first isolated by a salting out liquid extraction procedure. Since the concentration expected in the samples was very low, a dispersive liquid–liquid microextraction procedure was included for preconcentration. The ionic liquid 1-hexyl-3-methylimidazolium hexafluorophosphate (80 mg) was used as green extractant solvent and acetonitrile as disperser solvent (0.5 mL) for a 10 mL sample volume at pH 1.5, following the principles of green analytical chemistry. Liquid chromatography with electrospray ionization and quadrupole time of flight-mass spectrometry (LC-Q-TOF-MS) was used. The selectivity of the detection system, based on accurate mass measurements, allowed the toxins to be unequivocally identified. Mass spectra for quadrupole time of flight-mass spectrometry (Q-TOF-MS) and Q-TOF-MS/MS were recorded in the positive ion mode and quantification was based on the protonated molecule. Retention times ranged between 6.2 and 18.3 min using a mobile phase composed by a mixture of methanol and formic acid (0.1%). None of the target toxins were detected in any of the seawater samples analyzed, above their corresponding detection limits. However, microcystin LR was detected in the blue green alga sample.
The botanical origin of honey determines its composition and hence properties and product quality. As a highly valued food product worldwide, assurance of the authenticity of honey is required to prevent potential fraud. In this work, the characterisation of Spanish honeys from 11 different botanical origins was carried out by headspace gas chromatography coupled with mass spectrometry (HS-GC-MS). A total of 27 volatile compounds were monitored, including aldehydes, alcohols, ketones, carboxylic acids, esters and monoterpenes. Samples were grouped into five categories of botanical origins: rosemary, orange blossom, albaida, thousand flower and “others” (the remaining origins studied, due to the limitation of samples available). Method validation was performed based on linearity and limits of detection and quantification, allowing the quantification of 21 compounds in the different honeys studied. Furthermore, an orthogonal partial least squares-discriminant analysis (OPLS-DA) chemometric model allowed the classification of honey into the five established categories, achieving a 100% and 91.67% classification and validation success rate, respectively. The application of the proposed methodology was tested by analysing 16 honey samples of unknown floral origin, classifying 4 as orange blossom, 4 as thousand flower and 8 as belonging to other botanical origins.
Magnetic molecularly imprinted polymers (MMIPs) have fused molecular imprinting technology with magnetic separation technology, emerging as an innovative material capable of recognizing specific molecules and efficiently separating target substances. Their application to the extraction and purification of mycotoxins has great potential, due to the toxicity and economic impact of these contaminants. In this work, MMIP has been proposed as a sample treatment for the determination of main four aflatoxins (B1, B2, G1 and G2) in pig feed. The MMIP was formed through the integration of magnetic material (Fe3O4) with commercial molecularly imprinted polymers, avoiding the synthesis step and, therefore, simplifying the process. The analyses were carried out by high-performance liquid chromatography with fluorescence detection and the method was validated and limits of quantification (LOQs) between 0.09 and 0.47 ng/g were obtained, below the allowed or recommended levels by the European Union. Repeatability and intermediate precision showed relative standard deviations lower than 10% in all cases and trueness ranged from 92 to 111%. Finally, the proposed method was applied to 31 real pig feed samples, detecting aflatoxins with concentrations between 0.2 and 3.2 ng/g.
Nitrosamines (NAs), which are catalogued as carcinogenic compounds, may be present in meat products due to the conversion of nitrites and as result of migration from elastic rubber nettings used. A method based on ultrasonic assisted extraction coupled with dispersive liquid–liquid microextraction as sample treatment and gas chromatography-mass spectrometry as separation and detection technique was proposed for the determination of twelve NAs in cooked ham samples. The method was validated by evaluating linearity (0.5–1000 ng g−1), matrix effect, sensitivity (detection limits were between 0.15 and 1.4 ng g−1) and precision, which was below 12%. Five NAs were found in the samples with levels ranging from not quantifiable to 40 ng g−1. The effect of the elastic rubber nettings on the nitrosamine content of meat was evaluated by comparing the levels found in products made with several plastics or thread in the presence of additives.