We demonstrate a kind of ridge waveguide semiconductor laser with high-order sidewall gratings around 1550 nm. The ridge waveguide with 11th-order sidewall gratings is fabricated by the standard contact-types $i$ -line lithography. The fabricated device shows an output power of 44 mW at a bias current of 500 mA and a stable single-mode operation over wide ranges of current and temperature conditions. A high side-mode suppression ratio ( $\sim 59$ dB), a narrow linewidth of 63 kHz and a low relative intensity noise ( $ < -150$ dB/Hz under the frequency range from 0.03 to 20 GHz) have been demonstrated at $25^{\circ }\text{C}$ .
We have designed and fabricated a kind of supersymmetric slotted Fabry–Perot semiconductor laser near 1550 nm to achieve a single-mode, high-power, and narrow-linewidth operation. The structure of the laser is composed of an electrically pumped broad ridge waveguide in the middle to provide optical gain, a group of periodic slots etched near the front facet to suppress the extra longitudinal modes and achieve a narrow linewidth, and a pair of passive superpartner waveguides located on both sides to filter out the high-order lateral modes in the broad waveguide. The device measured under the temperature of 25 °C shows an output power of 113 mW, a single-lobe lateral far-field distribution with the full width at half maximum of 7.8°, a peak wavelength of 1559.7 nm with the side-mode suppression ratio of 48.5 dB, and an intrinsic linewidth of 230 kHz at the bias current of 800 mA. The device is a promising candidate for cost-effective light sources for coherent communication systems and LiDARs.
30 January 2023 in IEEE Photonics Technology Letters
High-power semiconductor laser with an integrated master oscillator power amplifier (MOPA) based on the surface-slotted structure is demonstrated. The lasing wavelength of 1.5 μm is achieved by using a group of micron-level slots fabricated by standard photolithography. The laser exhibits continuous-wave output power of up to 225 mW in the single-mode operation at room temperature. At the maximum output power, the modulation bandwidth is larger than 7 GHz, demonstrating the excellent performance of the MOPA based on the surface-slotted structure.
31 August 2022 in IEEE Photonics Technology Letters
A single-mode laser has been proposed and fabricated by standard photolithography, based on the $\mu \text{m}$ -level chirped photonic crystal. Side-mode suppression ratio (SMSR) over 45 dB and direct-modulation bandwidth up to 16.63 GHz has been exhibited by a $400~\mu \text{m}$ -long laser with the slope efficiency of about 0.22 mW/mA and the output power of about 33 mW. The device has a flat optical field distribution and can effectively suppress the longitudinal space hole burning effect along the cavity. A cost-effective solution is provided for the bulk production of the single mode laser.