Key Laboratory of Solid-State Optoelectronics Information Technology and State Key Laboratory on Integrated Optoelectronics, Institute of Semiconductors, Chinese Academy of Sciences, Beijing, China
Auto-generated profile, based on publicly available information
Hongwei Qu
Key Laboratory of Solid-State Optoelectronics Information Technology and State Key Laboratory on Integrated Optoelectronics, Institute of Semiconductors, Chinese Academy of Sciences, Beijing, China
We have designed and fabricated a kind of supersymmetric slotted Fabry–Perot semiconductor laser near 1550 nm to achieve a single-mode, high-power, and narrow-linewidth operation. The structure of the laser is composed of an electrically pumped broad ridge waveguide in the middle to provide optical gain, a group of periodic slots etched near the front facet to suppress the extra longitudinal modes and achieve a narrow linewidth, and a pair of passive superpartner waveguides located on both sides to filter out the high-order lateral modes in the broad waveguide. The device measured under the temperature of 25 °C shows an output power of 113 mW, a single-lobe lateral far-field distribution with the full width at half maximum of 7.8°, a peak wavelength of 1559.7 nm with the side-mode suppression ratio of 48.5 dB, and an intrinsic linewidth of 230 kHz at the bias current of 800 mA. The device is a promising candidate for cost-effective light sources for coherent communication systems and LiDARs.
12 February 2018 in IEEE Photonics Technology Letters
High-power low-divergence tapered lasers with slots in the ridge waveguide section and near the front facet are demonstrated and compared. Both devices can achieve a narrow spectral width. Tapered lasers with slots in the ridge waveguide deliver an output power of 2.15 W with a wall-plug efficiency of 43%. The maximum side mode suppression ratio (SMSR) is 28.8 dB and the vertical far-field angle is around 11°. For tapered lasers with slots near the front facet, the output power and the wall-plug efficiency are 1.87 W and 37%, respectively. A SMSR of 36.8 dB and a vertical beam divergence of 7° are obtained. High beam quality is achieved for both devices.
27 October 2022 in IEEE Photonics Technology Letters
A unstable cavity structure composed of the arc-shaped cavity, Fabry-Perot cavity, and sidewall saw-tooth microstructure is proposed to achieve mode selection in high-power broad-area diode laser with 980nm wavelength. In this cavity, the loss difference between the higher-order modes and the fundamental mode is increased to suppress the lasing of higher-order modes. The lateral divergence is reduced by about 28%. The number of modes in the near-field spot is reduced and the light intensity is concentrated towards the center of the Near-field profile. Also, the lateral beam parameter product decreases by 15%.
Broad-area semiconductor lasers, coupled with asymmetric transverse photonic crystals (TPCs), are designed by the effective index method and the transfer matrix method. Due to the propagation constant of the fundamental mode lying in the forbidden band of the TPCs, but those of the high-order modes lying in the allowed band of the TPCs, the fundamental mode is mainly concentrated in the active ridge waveguide, while all the high-order modes extend into the lossy TPCs on both sides of the active ridge waveguide. Therefore, the fundamental mode possesses larger optical confinement factor than those of the high-order modes, and reaches the lasing threshold more easily, which is demonstrated by the single-lobe horizontal far-field pattern of the TPC broad-area laser under an injection current of 0.3 A near the threshold. The proposed TPC broad-area laser provides a new strategy of designing broad-area semiconductor lasers with narrow divergence angles.
88x nm laser diodes with coupled waveguide photonic band crystal (CPBC) are designed and fabricated. By optimizing the optical confinement factor in the lightly doped coupled waveguide, the internal loss reduces to 0.52 cm -1 . The CPBC lasers achieve maximum power conversion efficiency of 65.57% under a continuous wave (CW) mode condition at room temperature, which is the highest reported value to our knowledge at 88x nm. The corresponding vertical divergence angel is 19.8°.