We demonstrate a kind of ridge waveguide semiconductor laser with high-order sidewall gratings around 1550 nm. The ridge waveguide with 11th-order sidewall gratings is fabricated by the standard contact-types $i$ -line lithography. The fabricated device shows an output power of 44 mW at a bias current of 500 mA and a stable single-mode operation over wide ranges of current and temperature conditions. A high side-mode suppression ratio ( $\sim 59$ dB), a narrow linewidth of 63 kHz and a low relative intensity noise ( $ < -150$ dB/Hz under the frequency range from 0.03 to 20 GHz) have been demonstrated at $25^{\circ }\text{C}$ .
30 January 2023 in IEEE Photonics Technology Letters
High-power semiconductor laser with an integrated master oscillator power amplifier (MOPA) based on the surface-slotted structure is demonstrated. The lasing wavelength of 1.5 μm is achieved by using a group of micron-level slots fabricated by standard photolithography. The laser exhibits continuous-wave output power of up to 225 mW in the single-mode operation at room temperature. At the maximum output power, the modulation bandwidth is larger than 7 GHz, demonstrating the excellent performance of the MOPA based on the surface-slotted structure.
31 August 2022 in IEEE Photonics Technology Letters
A single-mode laser has been proposed and fabricated by standard photolithography, based on the $\mu \text{m}$ -level chirped photonic crystal. Side-mode suppression ratio (SMSR) over 45 dB and direct-modulation bandwidth up to 16.63 GHz has been exhibited by a $400~\mu \text{m}$ -long laser with the slope efficiency of about 0.22 mW/mA and the output power of about 33 mW. The device has a flat optical field distribution and can effectively suppress the longitudinal space hole burning effect along the cavity. A cost-effective solution is provided for the bulk production of the single mode laser.
16 August 2022 in IEEE Photonics Technology Letters
A tunable semiconductor laser based on surface high-order Bragg gratings with 50 GHz channel spacing is demonstrated for the first time. The tunable semiconductor laser can cover 62 channels at 25 °C, and the side mode suppression ratio (SMSR) of each channel is larger than 34 dB. To achieve such properties, the number, depth and periods of the slots of the tunable semiconductor laser are optimized by the 2-D scattering matrix method (SMM) to obtain denser reflection peaks with smaller full width at half maximum (FWHM) and higher reflectivity. The tunable semiconductor laser can be widely used in dense wavelength division multiplexing (DWDM) systems and can provide a promising light source for photonic integrated circuits.
Electrically injected Parity-time (PT)-symmetric double ridge semiconductor laser lasing at 980 nm range is fabricated. The side mode suppression ratio (SMSR) of the spectrum of the laser is 37.97 dB at current of 91 mA.