Environmental issues and the global need to extend sustainable access to electricity have fostered a huge amount of research in distributed generation by renewables. The challenges posed by the widespread deployment of distributed generation by renewables, such as intermittent power generation, low inertia, the need for energy storage, etc., call for the development of smart grids serving specific local areas or buildings, referred to as microgrids and nanogrids, respectively. This has led in the last decades to the proposal and actual implementation of a wide variety of system architectures and solutions, and along with that the issue of the power converters needed for interfacing the AC grid with DC micro- or nanogrids, and for DC regulation within the latter. This work offers an overview of the state of the art of research and application of nanogrid architectures, control strategies, and power converter topologies.
Advanced automotive applications like Active Noise Cancellation (ANC) and Individual Listening Zones (ILZ) require a high number of transducers (i.e., microphones, accelerometers, and loudspeakers) usually arranged as arrays. Transducer arrays are widely employed in several applications besides automotive field, such as teleconferencing systems, industrial and civil monitoring of noise and vibrations. Automotive Audio Bus ( $\text{A}^{2}\text{B}$ ) is an audio transport protocol that solves the latest requirements of automotive and industrial fields. $\text{A}^{2}\text{B}$ allows transporting up to 32 channels in a multi-node daisy chain network and guarantees synchronization and low deterministic latency. This paper aims to develop a clock propagation model of an $\text{A}^{2}\text{B}$ network composed by transducer arrays. This model will be useful to evaluate the impact of the bus on the array performance. Firstly, a theoretical description of the $\text{A}^{2}\text{B}$ protocol and jitter analysis is provided. It follows a description of the jitter measures carried out on the clocks distributed along the $\text{A}^{2}\text{B}$ network. Lastly, latency introduced by nodes of the network is investigated.
30 June 2022 in IEEE Transactions on Consumer Electronics
Microphone arrays of various sizes and shapes are currently employed in consumer electronics devices such as speakerphones, smart TVs, smartphones, and headphones. In this paper, a full-digital, planar microphone array is presented. It makes use of digital Micro Electro-Mechanical Systems (MEMS) microphones, connected through the Automotive Audio Bus (A2B). A clock propagation model for A2B networks, developed in a previous work, was employed to estimate the effects of jitter and delay on microphone arrays. It will be shown that A2B allows for a robust data transmission, while ensuring deterministic latency and channels synchronization, thus overcoming the signal integrity issues which usually affect MEMS capsules. The microphone positioning is also discussed since it greatly affects the spatial accuracy of beamforming. Numerical simulations were performed on four regular geometries to identify the optimal layout in terms of number of capsules and beamforming directivity. An A2B planar array with equilateral triangle geometry and four microphones, three in the vertices and one in the center, was built. Experimental measurements were performed, obtaining an excellent matching with numerical simulations. Finally, the concept of an array of arrays (meta-array) is presented, designed by combining several triangular units and analyzed through numerical simulations.
24 October 2023 in IEEE Transactions on Industry Applications
Condition Monitoring (CM) aims at damage identification through the measurement of various data collected from the systems under investigation (civil structures, mechanical parts, or industrial machineries) such as acceleration, temperature, displacement, and dynamic properties variation. Synchronization between the measured signals is mandatory for the processing of diagnostic metrics and modal analysis, which is why most of the monitoring systems today consist of a centralized acquisition unit to which analog transducers are connected. However, this solution entails a high cost of equipment and the use of long analog cables for each transducer. A full-digital network solution has been developed to solve these problems. The acquisition network is composed of Interface Boards for interfacing with the data storage system (e.g., a personal computer) and Acquisition Nodes integrating Micro Electro-Mechanical Systems (MEMS) digital triaxial accelerometers. The Interface Boards can be connected via Universal Serial Bus (USB) or Local Area Network (LAN), while the Acquisition Nodes are connected in daisy-chain via a digital bus implemented on an Unshielded Twisted Pair (UTP) cable. The proposed solution simplifies wiring, reduces system cost, and provides accurately synchronized signals. Experimental measurements on a truss model and a motor test bench for ball bearing failures diagnostic are presented, to demonstrate the effectiveness of the solution in civil and industrial applications, compared to a traditional analog laboratory-grade system.