The aim of this study was to investigate the physicochemical characteristics and volatile flavor of fried tilapia skins under three frying methods. Conventional deep-fat frying usually increases the oil content of the fried fish skin and leads to lipid oxidation, which reduces the product quality. Alternative frying methods, such as air frying for 6 and 12 min under 180 °C (AF6, and AF12) and vacuum frying at 0.085 MPa for 8 and 24 min under 120 °C (VF8, and VF24) were compared to conventional frying for 2 and 8 min under 180 °C (CF2, and CF8) for tilapia skin. Physical properties of fried skin, such as the moisture content, water activity, L* values and breaking force decreased under all frying methods, while the lipid oxidation and a*, b* values increased with the increase in frying time. In general, VF offered higher hardness of product compared to AF which had a lower breaking force. Especially AF12 and CF8 had the lowest breaking force, which indicated higher crispness. For the oil quality inside the product, AF and VF reduced conjugated dienes formation and retarded oxidation compared to CF. The results of the flavor compositions of fish skin measured using gas chromatography mass spectrometry (GC/MS) with solid phase microextraction (SPME) showed that CF obtained higher unpleasant oily odor (nonanal, 2,4-decadienal, etc.), while AF presented greater grilling flavor (pyrazine derivatives). Because fish skin fried by AF only relied on hot air, Maillard reaction derived compounds, such as methylpyrazine, 2,5-dimethylpyrazine, and benzaldehyde were the leading flavors. This made the aroma profiles of AF very different from VF and CF. Among all the approaches, AF and VF developed lower oil content, mild fat oxidation and better flavor attributes, which proves their practical applications for frying tilapia fish skin.

The effect of fish gelatin and chitosan coatings on the physicochemical characteristics of fresh-cut apples (Malus pumila Mill.), stored at 5 °C and 22 °C, was investigated. Chitosan provided an effective control for microbial growth, maintained firmness during 4 days of storage at room temperature (22 °C), and 12 days at refrigerator (5 °C). The results indicated that chitosan coating caused a significant decrease (p < 0.05) in the L* value of cube color of cut apples. Fish gelatin–chitosan coatings mitigated the L* value and decrease in hue angle of the cut apple samples, at cold storage. Experimental results showed that fish gelatin–chitosan and chitosan coatings, can be used to mitigate the formation of vitamin C, due to respiration, microbial growth, and weight loss at cold storage. Fish gelatin–chitosan coating might be a better combination for maintaining appearance and extending shelf-life of cut apples, compared to only chitosan coatings.

The quality and acrylamide content of deep-fried and microwave-puffed shrimp chips fortified with 0.1%, 0.5%, or 1.0% calcium salts (calcium lactate, calcium carbonate, calcium citrate, or calcium acetate) were investigated. Microwave-puffed shrimp chips contained higher amounts of acrylamide (130.43 ppb) than did deep-fried shrimp chips. The greatest mitigation of acrylamide formation in overfried chips was obtained with 0.1% calcium lactate. All browning indexes of fortified shrimp chips, whether deep-fried or microwave-puffed, were reduced. L* values of microwave-puffed shrimp chips were higher than those of deep-fried shrimp chips, whereas a* and b* values and browning indexes were lower. Color differences (ΔE) between deep-fried puffed shrimp chips fortified with calcium salts and a control sample were higher than 5, and the sensory scores of shrimp chips were significantly decreased by the addition of calcium lactate.

The interactions among agar, gellan gum, gelatin, and modified waxy corn starch in the formation of mixed gels were examined in five different ratios. Binary hydrocolloid gels were prepared using three ingredients: two hydrocolloids (total hydrocolloid concentration: 0.5 wt%, ratios of mixture: 0/0.5, 0.1/0.4, 0.2/0.3, 0.3/0.2, 0.4/0.1, and 0.5/0) and water. The textural properties of the hydrocolloid gels were studied by measuring the gel strength, rigidity, breaking force, breaking point, and syneresis as functions of the mixing ratio. The higher syneresis percentage of binary modified waxy corn starch and gum gels than that of mixed gum gels after cold storage was mainly due to the retrogradation of amylopectin. Agar was shown be the most influential with regards to increasing the gel strength, breaking force, and rigidity among the three kinds of gum, while gellan gum was more effective against syneresis than agar and gelatin for storage periods of 7 and 14 days. In the mixed gels, a dramatic increase in the breaking point from 0 to 0.5% was only exhibited for gellan gum. The results provided useful information, including gel strength, rigidity, breaking force, breaking point, and syneresis, for gum and modified corn starch ingredients selected from refrigerated binary gum gels such as pudding for food product development.