Ricardo Robles Enciso

Dr. Ricardo Robles Enciso

Sistemas de Comunicaciones Móviles, Universidad Politécnica de Cartagena, Cartagena, Murcia, Spain
orcid

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
20 March 2023 in Sensors
Verified
Journal Article
Open access
PDF file
Ricardo Robles EncisoRicardo Robles Enciso
Ricardo Robles Enciso
IMIsabel Pilar Morales-Aragón
Isabel Pilar Morales-Aragón
ASAlfredo Serna-Sabater
Alfredo Serna-Sabater
MIMaria Teresa Teresa Martinez Ingles
Maria Teresa Teresa Martinez Ingles
AMAntonio Mateo-Aroca
Antonio Mateo-Aroca
LJLeandro Juan-Llácer
Leandro Juan-Llácer
In this work, we present power and quality measurements of four transmissions using different emission technologies in an indoor environment, specifically a corridor, at the frequency of 868 MHz under two non-line-of-sight (NLOS) conditions. A narrowband (NB) continuous wave (CW) signal has been transmitted, and its received power has been measured with a spectrum analyzer, LoRa and Zigbee signals have also been transmitted, and their Received Signal Strength Indicator (RSSI) and bit error rate (BER) have been measured using the transceivers themselves; finally, a 20 MHz bandwidth 5G QPSK signal has also been transmitted and their quality parameters, such as SS-RSRP, SS-RSRQ and SS-RINR, have been measured using a SA. Thereafter, two fitting models, the Close-in (CI) model and the Floating-Intercept (FI) model, were used to analyze the path loss. The results show that slopes below 2 for the NLOS-1 zone and above 3 for the NLOS-2 zone have been found. Moreover, the CI and FI model behave very similarly in the NLOS-1 zone, while in the NLOS-2 zone, the CI model has poor accuracy in contrast to the FI model, which achieves the best accuracy in both NLOS situations. From these models, the power predicted with the FI model has been correlated with the measured BER value, and power margins have been established for which LoRa and Zigbee would each reach a BER greater than 5%; likewise, −18 dB has been established for the SS-RSRQ of 5G transmission.

29 October 2024 in Smart Cities
Verified
Journal Article
Open access
PDF file
Alberto Robles-EncisoAlberto Robles-Enciso
Alberto Robles-Enciso
Ricardo Robles EncisoRicardo Robles Enciso
Ricardo Robles Enciso
Antonio Fernando GomezAntonio Fernando Gomez
Antonio Fernando Gomez
Reducing carbon emissions is a critical issue for the near future as climate change is an imminent reality. To reduce our carbon footprint, society must change its habits and behaviours to optimise energy consumption, and the current progress in embedded systems and artificial intelligence has the potential to make this easier. The smart building concept and intelligent energy management are key points to increase the use of renewable sources of energy as opposed to fossil fuels. In addition, cyber-physical systems (CPSs) provide an abstraction of the management of services that allows the integration of both virtual and physical systems in a seamless control architecture. In this paper, we propose to use multiagent reinforcement learning (MARL) to model the CPS services control plane in a smart house, with the purpose of minimising, by shifting or shutdown services, the use of non-renewable energy (fuel generator) by exploiting solar production and batteries. Furthermore, our proposal dynamically adapts its behaviour in real time according to current and historic energy production, thus being able to handle occasional changes in energy production due to meteorological phenomena or unexpected energy consumption. In order to evaluate our proposal, we have developed an open-source smart building energy simulator and deployed our use case. Finally, several simulations with different configurations are evaluated to verify the performance. The simulation results show that the reinforcement learning solution outperformed the priority-based and the heuristic-based solutions in both power consumption and adaptability in all configurations.

12 July 2023 in SoftwareX
Verified
Journal Article
Open access
Alberto Robles-EncisoAlberto Robles-Enciso
Alberto Robles-Enciso
Ricardo Robles EncisoRicardo Robles Enciso
Ricardo Robles Enciso
ASAntonio F. Skarmeta
Antonio F. Skarmeta

26 March 2023
Verified
Conference Paper
Closed access
Ricardo Robles EncisoRicardo Robles Enciso
Ricardo Robles Enciso
LJLeandro Juan-Llácer
Leandro Juan-Llácer
JMJose-María Molina-García-Pardo
Jose-María Molina-García-Pardo
The massive use of sensors and actuators expected in Agriculture 4.0 will require a large deployment of wireless systems in agricultural environments. The planning of these radio communication systems is carried out using computer tools that incorporate propagation models. In this sense, it is necessary to propose propagation models for specific agricultural environments according to the type of plantation. In some of these models the trees are replaced by a layer medium, in which the electrical properties of leaves are specified in terms of their relative permittivity. This work presents permittivity measurements on citrus leaves, using a device based on a microwave cavity resonant method. Measurements were performed on shredded leaves inside a sealed Pyrex tube. At 2.2 GHz, the estimated values of the real and imaginary parts of the dielectric constant for lemon and oranges fresh leaves were 23.26 and 7.26, and 19.73 and 7.05, respectively.

17 December 2024 in IEEE Access
Verified
Journal Article
Open access
Ricardo Robles EncisoRicardo Robles Enciso
Ricardo Robles Enciso
LJLeandro Juan-Llácer
Leandro Juan-Llácer
JMJose-Maria Molina-Garcia-Pardo
Jose-Maria Molina-Garcia-Pardo
José Víctor RodríguezJosé Víctor Rodríguez
José Víctor Rodríguez
Agriculture 4.0 is revolutionizing crop production by leveraging advanced sensor networks and wireless technologies, with efficiently planned radio communication systems serving as a key component. In this paper, we develop a theoretical model for calculating the propagation path loss in a Line-of-Sight (LoS) context in a lemon plantation. The heights of the transmitter and receiver are hereby considered to be below tree height. The model was used to compare measurements performed in the citrus plantation in the 1800 and 2100 MHz frequency bands. A layered approach in the Vertical Plane (VP) and the Horizontal Plane (HP) was assumed. In the VP, we used a homogeneous medium with relative permittivity instead of soil. In the HP, we represented the trees as an equivalent continuous medium with effective permittivity. We find that a simple model including direct and reflection-from-soil contributions is enough to estimate the path loss within 10 m. To estimate accurate path loss beyond this distance, however, it becomes necessary to incorporate direct, reflected-from-soil, and reflected-from-trees contributions.