Nano-crystalline diamond (NCD) coating to improve the performance of cutting tools, as the coating thickness varies, the cutting performance and lifespan of the tool varies because the radius of its cutting edge and coating surface roughness are altered. Therefore, an in-depth analysis on the impact of the variations in coating thickness on the cutting tool abrasion and quality of machined surface is necessary. In this study, two NCD ball endmills were coated with 8 and 12 μm thicknesses, and the tool abrasion and roughness of the machined plane were observed after milling. Furthermore, the morphology of the coated surface and abrased cutting edge were observed using a 3D confocal microscope. Consequently, we observed that individual nodules were formed on the continuous aggregates as the coating thickness increased, which increased the coated surface roughness. The two damage modes of the aggregation determined the dominant abrasion that occurred on the cutting edges of both types of coating thicknesses. Delamination and crater wear caused a sharp increase in the roughness of the machined surface. In summary, the increase in coating thickness delayed the delamination of the coating but increased the roughness of the cutting edge, which reduced the machined surface roughness.
3 May 2024 in Journal of Mechanical Science and Technology
A capsule-type modular machine tool was developed, which was capable of multifunctional processes with a single setup. This mechanism was designed according to the concept of a reconfigurable machine tool (RMT), which can transform from a machining center to a lathe, and is capable of multiple functional processes, such as laser, milling, and grinding processes. After addressing the kinematics of the machine, a static structural analysis was performed and some ribs were added to enhance the stiffness. A frequency response function (FRF) simulation was conducted on the modified machine and natural frequencies were determined to avoid resonance in processing. Then, an FRF test was performed to find the actual natural frequencies, to confirm the simulation results. After investigating the natural frequencies, high-speed machining was performed to make 300 μm sized patterns.
In this paper, we introduce a microabrasive air jet (micro-AAJ) machining system and describe machining results obtained while using it. Our research activities have focused on the development of micro-AAJ machining methods for friction reduction without requiring a mask. Through this study, we want to show that such processing is possible without a mask when using the AAJ method. In this paper, a micro-AAJ machining system is introduced, and the processing results are described. By comparing the friction coefficient of texturing under various conditions, the relative relationship between the surface shape and the friction coefficient can be identified. We investigated the effect of the relationship between rotating velocity, traverse speed, density of the patterned area and injection pressure on friction. The friction is decreased with a low traverse speed and high-density patterned area under high-speed driving conditions, as verified by experiments using a friction test system.