In this article, a discrete-time sensorless current control for permanent magnet synchronous motors with an accuracy-improved phase-locked loop is proposed. The proposed current control method is designed directly in the discrete-time domain, which guarantees the control performance in digital implementations. In the proposed scheme, a discrete-time double-vector model is constructed for permanent magnet synchronous motor (PMSM). Then, the complex principle-based discrete-time current regulator is extended to PMSM with better performance and higher robustness. In order to reduce the error between the estimated and actual back electromotive force (back-EMF), a discrete-time sliding-mode back-EMF observer is designed based on an exact discretized state-space model. Then according to the rotational mode of the back-EMF in the discrete synchronous reference frame, a fully discretized back-EMF model is established with the angular error between the estimated angle and the actual angle. Based on the back-EMF model, the proposed phase-locked loop (PLL) can estimate the electrical angle more accurately. The angular error which increases with the rising speed in the conventional angle estimation method is suppressed by the proposed PLL. Finally, the comparative experiments verify the effectiveness of the proposed method.
In order to solve the problems of soaring costs and supply fluctuation in permanent magnet materials, this paper investigates and develops a magnetless wound field synchronous motor (WFSM) drive system for electric vehicle (EV) application. As the crucial drive component for EVs, the proposed WFSM in this paper has a two-stage structure which is described as the exciter and the main motor. The excitation characteristics of the exciter that provide power to the rotor field winding are emphatically analyzed. In addition, the discrete time domain armature current regulator and excitation current regulator are designed and analyzed for the high-performance WFSM drive system. A current coordinated control strategy for the full speed range is proposed to expand the constant power region. The experiment shows that the excitation characteristics and torque capability of the WFSM are consistent with the analysis, and proves that the WFSM is a potential solution for the magnetless motor for EV application.
24 July 2023 in IEEE Transactions on Power Electronics
In permanent magnet synchronous motor (PMSM) drives, the rotor position signal is critical. However, the failure of the mechanical position sensor and the position tracking error of the resolver-to-digital conversion (RDC) causes position signal biases. These position biases significantly deteriorate motor drive performance, while there are few effective methods to handle both biases simultaneously. To uniformly and accurately compensate for these biases, a back electromotive force (back-EMF)-based discrete-time rotor position bias compensation method for PMSMs is proposed, which includes improvements in compensation accuracy and algorithm execution efficiency. In the proposed scheme, an adaptive disturbance observer with multi-parameter estimation is designed to estimate the back-EMF. The proposed multi-parameter estimation is designed based on the decomposed voltage vector of the current regulator. Compared with widely used recursive-least-square (RLS) methods, the proposal greatly reduces the computational burden. Then according to the rotational mode of the back-EMF in the discrete synchronous reference frame, an exactly discretized back-EMF model is established. Based on this model, a discrete-time compensation method for rotor position bias is proposed. Compared with the continuous-time back-EMF model-based method, the proposal can suppress the estimated error between actual and estimated bias, which rises with increasing motor speed. Finally, the experiments are carried out to verify the effectiveness of the proposed method.
Permanent magnet synchronous generator (PMSG) is gradually becoming popular in the aero-electric propulsion system due to its high efficiency and high power density. The selection of stator lamination materials usually requires multiple considerations, including high magnetic performance, low losses, light weight, etc. In order to achieve higher efficiency and power density, the electromagnetic structure of the PMSG is optimized, and the electromagnetic performance and weight of various stator lamination materials and thicknesses are also taken into consideration in the paper. The magnetic material properties, including B-H characteristics and losses at different frequencies, are obtained by the test and used to accurately predict the performance of machines. Finally, a 10kW and 20-pole and 45-slot prototype with 0.1mm thick 1J22 material is manufactured for the electric propulsion system of UAV. The simulation and experiment results show that the efficiency of the generator system can reach 92.5%, and the power density of the generator is about 2kW/kg.
27 November 2024 in IEEE Journal of Emerging and Selected Topics in Power Electronics
Under low carrier ratio, the current regulator of the permanent magnet synchronous motor (PMSM) is usually designed directly in the discrete-time domain to avoid significantly reduced control performance. The complex vector principle is widely utilized to simplify the analysis and design of the current control system. However, the principle is difficult to be applied to the interior PMSM (IPMSM) due to its saliency. In order to overcome this barrier, a unified complex vector model is developed, where the reconstructed voltage and current vectors are taken as the state variables. Then the complex vector model can be directly discretized without any approximations. Based on this model, a discrete-time complex vector current regulator for both surface-mounted PMSM (SPMSM) and IPMSM is proposed. Finally, the experimental verification is carried out on an IPMSM drive test platform. The theoretical analysis and the experimental results indicate that the proposed current regulator has improved control performance, and robustness to resistance and inductance parameter mismatch.
28 September 2023 in IEEE Transactions on Transportation Electrification
The wound rotor synchronous generator (WRSG) has severe parameter perturbation, resulting in poor current loop robustness of active rectifier based on typical complex vector (CV) current regulator. Additionally, the CV principle is not fully applicable to WRSG with strong saliency ratio. In order to overcome this barrier, this paper proposes a discrete-time robust adaptive (DRA) current regulator that automatically tunes the loop gains based on Lyapunov stability theory without parameter estimation, ensuring system stability while improving anti-interference ability. Machine saliency can be ignored due to the adaptive characteristics of the DRA regulator. The adaptive law is directly derived in the discrete-time domain to ensure the accuracy of the design and can be directly applied to digital control system. Finally, experimental verification is conducted on the power generation platform of WRSG, and the results show that the proposed scheme has excellent steady-state performance, and both armature current harmonics and excitation current ripple are restrained. Moreover, it has strong robustness when the system parameters change.