Technological advances are closely related to the development of new materials and their processing and manufacturing technologies. In the dental field, the high complexity of the geometrical designs of crowns, bridges and other applications of digital light processing 3D-printable biocompatible resins is the reason for the need for a deep understanding of the mechanical proprieties and behavior of these materials. The aim of the present study is to assess the influence of printing layer direction and thickness on the tensile and compression proprieties of a DLP 3D-printable dental resin. Using the NextDent C&B Micro-Filled Hybrid (MFH), 36 specimens (24 for tensile strength testing, 12 for compression testing) were printed at different layer angulations (0°, 45° and 90°) and layer thicknesses (0.1 mm and 0.05 mm). Brittle behavior was observed in all specimens regardless of the direction of printing and layer thickness for the tensile specimens. The highest tensile values were obtained for specimens printed with a layer thickness of 0.05 mm. In conclusion, both printing layer direction and thickness influence mechanical proprieties and can be used to alter the materials’ characteristics and make the final printed product more suitable for its intended purposes.

Background/Objectives: This study aimed to compare the associations of digital measurements obtained from orthopantomographies (OPGs) or panoramic radiographs and lateral cephalograms in evaluating facial asymmetry in patients with different skeletal classes. The sample consisted of 128 Romanian patients (67 females, 61 males) who sought orthodontic treatment. These measurements are an essential diagnostic tool for evaluating facial asymmetry in order to treat them. Methods: Lateral cephalograms and OPGs were obtained for each patient, and digital tracing was performed using the WebCeph program. Angular measurements (ANB, FMA, gonial angles) and linear measurements (ramus height, mandibular body length) were assessed on both imaging modalities. Results: Strong positive correlations were found between the gonial angle and ramus height measurements obtained from lateral cephalograms and OPGs (rs range: 0.800–0.946; p < 0.001). However, the mandibular body length showed weaker correlations between the two methods. Significant sex differences were observed, with males exhibiting larger craniofacial measurements compared to females (p < 0.05). The study population was quite young, as seen by the cohort’s median age of 21 years and interquartile range (IQR) of 16 to 29 years. Lateral Ceph: the FMA angle median value of 22° (IQR: 17–25), gonial angle median of 121° (IQR: 116–127), mandibular ramus height median value of 44 mm (IQR: 41–48 mm), and mandibular body length median value of 70 mm (IQR of 65 to 76 mm). OPG: gonial angles on the right and left sides yield medians of 121° (IQR: 116–127) and 122° (IQR: 117–127); the mandibular ramus height on the right and left sides shows medians of 44.0 mm (IQR: 40.0–47.0 mm) and 43 mm (IQR: 40–48 mm); and the mandibular body on the right side presents a median of 71 mm (IQR: 67–76 mm) and the left side has a median of 71 mm (IQR: 67–75 mm). Conclusions: The findings suggest that OPGs can be reliably used to measure the gonial angle and ramus height, providing results comparable to lateral cephalograms. However, caution should be exercised when predicting horizontal measurements from OPGs. The standardization of the OPG recording process and further research with larger sample sizes are required to establish standard panoramic norms for OPG parameters in the assessment of facial asymmetry.

Musculoskeletal disorders (MSDs) are among leading factors for early retirement of dental practitioners while the application of ergonomic principles is often overlooked during dental education. The article aims to assess the need for dental ergonomics modules as an integrated part of the dental school curriculum and to quantify the significance and role of ergonomics in reducing musculoskeletal stress generated while undergoing dental training. The study design consisted of a three-part original close-ended multiple-choice questionnaire carried out among 75 sixth year students from “Victor Babeş” University of Medicine and Pharmacy, Timişoara, Romania. Questions focused on the basic knowledge of theoretical ergonomics, the ISO 11226 standard and means of improvement in undergraduate ergonomics training. Most students had an average level of knowledge regarding dental ergonomic principles. Data analysis showed that 62.16% agree that the information received in the second-year dental ergonomics course was helpful in regard to time organization. A high percentage (86%) also understood the correct positioning of the patient while performing dental procedures. Although implementation of ergonomic principles in the early dental training years has a high influence in the prevention of MSDs, students do not fully understand the impact this subject has on their future careers.

Either due to trauma, extraction or congenital factors, the absence of teeth has aesthetic, functional, financial and psychological consequences. The aim of the current study is to assess an individualized polymeric 3D printed digitally planned surgical guide designed to achieve precision and predictability in non-standard mini-implant orthodontic cases. Twenty-seven patient records with missing anterior teeth were selected from the database of a private clinic in Timisoara, Romania. Based on the analysis of the cases included in the research, a surgical guide for the insertion of mini-implants as provisional crown support was designed. An FEM simulation was performed using the Abaqus numerical analysis software. Finite element simulation revealed the maximum displacements and stresses that occur in the surgical guide. Mini-implant supported provisional crowns can be a simple and low-cost method to increase patient self-esteem and compliance with the orthodontic treatment. Computer aided mechanical simulation is a useful tool in analyzing different polymeric surgical guide designs before being used in clinical situations in order to avoid failure.

(1) Background: This retrospective cohort study aimed to investigate the cephalometric evaluation of facial height ratio (FHR) and growth patterns. (2) Methods: We assessed facial height ratios, the y-axis to SN angle, and growth patterns in 94 participants from Timis County using digital cephalograms. Angle’s classification guided the categorization of participants. We digitally traced and analyzed cephalograms using the WebCeph imaging software. We conducted the statistical analysis using Python version 3.11.9. We performed the following statistical tests: Welch’s t-test or ANOVA (analysis of variance), Mann–Whitney U test or the Kruskal–Wallis test, χ² test or Fisher’s, and logistic regression. (3) Results: Significant correlations were observed between FHR and craniofacial development, especially in hypodivergent growth patterns. Among the molar classes, the most predominant growth pattern in Class I was normodivergent (61.5%), followed by hypodivergent (33.3%). In Class II, hypodivergent growth was the most common (52%), with a smaller proportion of normodivergent cases (30.8%). Class III was characterized by a mix of growth patterns, with hypodivergent being predominant (14.7%). Across all groups, the y-axis to SN angle remained within normal limits, and a strong negative correlation with Jarabak’s ratio was found (r = −0.72, p < 0.001). This shows the importance of using holistic assessment methods in orthodontic practice. (4) Patients from Timis County mostly have a hypodivergent growth pattern across all types of malocclusions. Understanding these patterns is essential for comprehensive orthodontic treatment planning. We need to conduct further research to investigate the implications of these findings on treatment outcomes and patient care.

Background/Objectives: This study aims to investigate the correlation between facial soft tissues, teeth, and skeletal growth patterns in order to provide an accurate diagnosis and orthodontic treatment plan using digital examination of lateral cephalograms. Achieving the best orthodontic outcome begins with an accurate, timely, and thorough diagnosis before starting the treatment phase. Methods: This cross-sectional study investigated the correlation between facial soft tissues, dental hard tissues, and skeletal growth patterns in 100 Romanian orthodontic patients (52 females, 48 males; median age 26 years) using digital lateral cephalograms. The measurements included skeletal parameters (ANB angle, FMA, Wits appraisal), dental parameters (inclinations of upper and lower incisors, interincisal angle), and soft tissue parameters (nasolabial angle, upper and lower lip positions relative to E-plane), all assessed using the AI-powered WEBCEPH software. Statistical analysis was conducted using RStudio (version 4.3.1). Results: A total of 100 subjects (52% female; median age, 26 years [range, 19–32 years]) were evaluated. No significant gender-based differences were found across cephalometric, soft tissue, or dental parameters. When stratified by ANB classification (Class I, 41%; Class II, 48%; Class III, 11%), significant differences emerged in the interincisal angle (p = 0.047), L1-to-LOP measurement (p < 0.001), lip-to-E-plane distances (p ≤ 0.009), Wits appraisal (p < 0.001), and the ANB angle itself (p < 0.001). Furthermore, stratification by FMA classification revealed expected differences in FMA values (p < 0.001) and a significant variation in the distribution of ANB classes (p = 0.042). All other cephalometric and soft tissue parameters remained comparable across FMA categories. Conclusions: The study highlights the importance of integrating hard and soft tissue analyses in orthodontic diagnosis and treatment planning to achieve optimal aesthetic and functional outcomes.