This paper outlines the use of a finite element model to simulate the behaviour for a standard steel bicycle frames under a range of measured load cases. These load cases include those measured both in the laboratory setting and also in the field, and include loads transmitted at key areas such as the dropouts and hub, the bottom bracket and drive, the headset and handlebars, and the seat post and saddle. The load cases analysed include static representations of dynamic bump situations which occur sporadically and also those which occur constantly or regularly such as those generated at the drive and handlebars during climbing or cruising. The resulting stresses within the bicycle are analysed in the context of frame performance relating to static and fatigue strengths and are also compared to similar load cases presented in the literature. Further research is required to understand the influence of tube profiles on frame strength, and to analyse the modes of failure for various bicycle designs and materials used under typical and extreme usage in order to understand the implications of design on safety
Biobased composites offer unique properties in the context of sustainable material production as well as end-of-life disposal, which places them as viable alternatives to fossil-fuel-based materials. However, the large-scale application of these materials in product design is hindered by their perceptual handicaps and understanding the mechanism of biobased composite perception, and its constituents could pave the way to creating commercially successful biobased composites. This study examines the role of bimodal (visual and tactile) sensory evaluation in the formation of biobased composite perception through the Semantic Differential method. It is observed that the biobased composites could be grouped into different clusters based on the dominance and interplay of various senses in perception forming. Attributes such as Natural, Beautiful, and Valuable are seen to correlate with each other positively and are influenced by both visual and tactile characteristics of the biobased composites. Attributes such as Complex, Interesting, and Unusual are also positively correlated but dominated by visual stimuli. The perceptual relationships and components of beauty, naturality, and value and their constituent attributes are identified, along with the visual and tactile characteristics that influence these assessments. Material design leveraging these biobased composite characteristics could lead to the creation of sustainable materials that would be more attractive to designers and consumers.
Development of Finite Element (FE) modelling techniques has allowed the creation of 3D models based upon high resolution Computed Tomography (CT) images, which have been used to assess the mechanical properties of bone, fixation techniques, and the performance of bone micro-architecture. In this study, a semi-automated process for converting CT data into FE models has been used to investigate if the automated geometry and material properties mapping of mid-shaft cortical bone. In order to develop the process, a porcine femoral specimen was imaged with a spiral CT scanner, allowing the semi-automated creation of a 3D FE model. Inhomogeneous material properties were mapped using the Bonemat algorithm which allows automated adjustment of values from CT data. The 3D model was cropped at the start of each metaphyseal region to isolate the mid-shaft region for testing. Hand calculation of the mid-shaft was undertaken using a composite ellipse solution, which allowed the direction and magnitude of the maximum stresses, and the deflection occurring within the bone mid-shaft to be analysed with respect to the results obtained within the finite element testing. Predictions from the ellipse method correlated significantly well with the stress patterns and maximum deflections achieved within the 3D FE model, validating the modelling process for future testing. Using CT-derived FE analysis to determine failure mechanisms has great potential for use as a tool in fracture analysis. The increased geometrical accuracy has potential for use within Sports Injuries studies, where the inherent complexity of skeletal modelling and multi-factor loading conditions can often lead to errors in simplified solutions. Further understanding of failure mechanisms such as these can be used to influence the design of sports equipment and surfaces, helping to prevent sports injuries in the future
Sand sports include running, volleyball, soccer, beach flags, ironman, and fitness training. An increased amount of soft tissue injuries have been widely reported. A novel technique of determining the surface stiffness of beach sand in-situ used a simple drop-test penetrometer. The relationship between drop height and the depth of penetration squared was linear (Pearson’s correlation coefficient r2 > 0.92). The stiffness ratio between the soft dry sand and ocean-saturated wet sand compacted by eight hours of coastal water exposure was approximately seven, which was similar to previously reported stiffness measurements in a sand box. However, the absolute stiffness values were much smaller. While this technique was manually operated, an automatic system is postulated for future studies.
Biobased composites - sustainable alternatives to fossil-based materials, could gain better acceptance if their perceptual handicaps could be overcome. This paper considers the role of tactility in contrast with visual stimuli, as well as the perceptual qualities influenced by tactility. The analysis revealed a significant impact of tactility in forming attributes such as naturality, roughness and strength. Attributes like beauty and complexity remain less affected by touch, and more visual-dominant. These findings may help designers in creating desirable products with sustainable materials.