The easy and rapid analytical tool, electrochemically polymerized (EP) glycine (GN) layered carbon paste electrode (LCPE), was used for the analysis of levofloxacin (LN) using cyclic voltammogram (CV) and differential pulse voltammetry (DPV). The surface features and activities of the electrochemical sensors EPGNLCPE and bare carbon paste electrode (BCPE) were analyzed using electrochemical impedance spectroscopy (EIS), field emission scanning electron microscopy (FE-SEM), CV and DPV methods. The modified sensor (EPGNLCPE)offers a vibrant and sensitive electrochemical LN oxidation peak by controlling overpotential and the electrode material fouling effect unlike BCPE. Under improved experimental conditions, the DPV method was used to analyze LN on EPGNLCPE by varying its concentration in 0.2 M phosphate buffer solution from 30 to 90 µM, resulting in a good linear relationship(between peak current and concentration), lower limit of detection (LOD: 8.436 × 10⁻⁷ M) and lower limit of quantification (LOQ: 2.812 × 10⁻⁶ M). Finally, real-time application of the sensor was tested by analyzing LN in medicinal samples, and good LN recovery was observed.

Certain dyes are deleterious to the biological system, including animals and plants living in the water sources, soil sources, and so on. Thus, the analysis of these dyes requires a potent, quick, and cost-effective approach to the environmental samples. The present research work shows a modest, low-cost, and eco-friendly electrochemical device based on poly(dl-phenylalanine)-layered carbon nanotube paste electrode (P(PAN)LCNTPE) material for indigo carmine (ICN) detection in the presence of tartrazine. The cyclic voltammetric, field emission scanning electron microscopy, and electrochemical impedance spectroscopic methods were operated for the detection of the redox nature of ICN and electrode material surface activities, respectively. In better operational circumstances, P(PAN)LCNTPE provided better catalytic activity for the redox action of ICN than the bare carbon nanotube paste electrode. The P(PAN)LCNTPE showed good electrochemical activity during the variation of ICN concentrations ranging from 0.2 µM to 10.0 µM with improved peak current, and the limit of detection was about 0.0216 µM. Moreover, the P(PAN)LCNTPE material was performed as a sensor of ICN in a tap water sample and shows adequate stability, repeatability, and reproducibility.