Modern biocompatible materials of both natural and synthetic origin, in combination with advanced techniques for their processing and functionalization, provide the basis for tissue engineering constructs (TECs) for the effective replacement of specific body defects and guided tissue regeneration. Here we describe TECs fabricated using electrospinning and 3D printing techniques on a base of synthetic (polylactic-co-glycolic acids, PLGA) and natural (collagen, COL, and hyaluronic acid, HA) polymers impregnated with core/shell β-NaYF4:Yb3+,Er3+/NaYF4 upconversion nanoparticles (UCNPs) for in vitro control of the tissue/scaffold interaction. Polymeric structures impregnated with core/shell β-NaYF4:Yb3+,Er3+/NaYF4 nanoparticles were visualized with high optical contrast using laser irradiation at 976 nm. We found that the photoluminescence spectra of impregnated scaffolds differ from the spectrum of free UCNPs that could be used to control the scaffold microenvironment, polymer biodegradation, and cargo release. We proved the absence of UCNP-impregnated scaffold cytotoxicity and demonstrated their high efficiency for cell attachment, proliferation, and colonization. We also modified the COL-based scaffold fabrication technology to increase their tensile strength and structural stability within the living body. The proposed approach is a technological platform for “smart scaffold” development and fabrication based on bioresorbable polymer structures impregnated with UCNPs, providing the desired photoluminescent, biochemical, and mechanical properties for intravital visualization and monitoring of their behavior and tissue/scaffold interaction in real time.
20 April 2022 in Inorganic Materials: Applied Research
The NaYF4:Yb3+:Er3+/NaYF4 upconversion nanophosphors (UCNPs) containing ions of rare-earth elements with a core/shell structure were synthesized solvothermally, and their photoluminescent properties were analyzed depending on the size of nanoparticles and preparative synthesis conditions. We showed that the intensity and lifetime of photoluminescence of the upconversion nanoparticles depend on the intensity of laser excitation, the size of the nanoparticles, and the presence of an inert shell. When an inert shell is formed on the surface of NaYF4:Yb3+:Er3+ nanoparticles, the conversion coefficient of visible and near-IR radiation in different spectral regions can increase by an order of magnitude owing to the shielding of luminescent centers from nonradiative losses at surface defects.
Non-invasive visualization and monitoring of tissue-engineered structures in a living organism is a challenge. One possible solution to this problem is to use upconversion nanoparticles (UCNPs) as photoluminescent nanomarkers in scaffolds. We synthesized and studied scaffolds based on natural (collagen—COL and hyaluronic acid—HA) and synthetic (polylactic-co-glycolic acids—PLGA) polymers loaded with β-NaYF4:Yb3+, Er3+ nanocrystals (21 ± 6 nm). Histomorphological analysis of tissue response to subcutaneous implantation of the polymer scaffolds in BALB/c mice was performed. The inflammatory response of the surrounding tissues was found to be weak for scaffolds based on HA and PLGA and moderate for COL scaffolds. An epi-luminescent imaging system with 975 nm laser excitation was used for in vivo visualization and photoluminescent analysis of implanted scaffolds. We demonstrated that the UCNPs’ photoluminescent signal monotonously decreased in all the examined scaffolds, indicating their gradual biodegradation followed by the release of photoluminescent nanoparticles into the surrounding tissues. In general, the data obtained from the photoluminescent analysis correlated satisfactorily with the histomorphological analysis.
1 May 2020 in Inorganic Materials: Applied Research
The processes of hydrophilization of the initially hydrophobic surfaces of monolithic disks from D,L-polylactide and polylactoglycolide used to create a variety of tissue-engineered structures based on them are studied. The surface of the studied samples is processed by the method of directed hydrolytic modification, by means of dielectric discharge plasma, by the method of deposition of biocompatible hydrophilic compounds (BHCs) on the surface, or by the method of preliminary introduction of the BHCs into the material of the disk and hydrolytic modification of its surface. Sodium alginate, maltodextrin, and hyaluronic acid are used in experiments as BHCs. A comparative analysis of the contact angles of wetting between the surfaces of the initial disks and treated disks shows that the most hydrophilic surface is the surface of the samples obtained from a powder mixture of aliphatic polyesters with sodium alginate after hydrolytic modification.
The use of 3D-printed gene-activated bone grafts represents a highly promising approach in the fields of dentistry and orthopedics. Bioresorbable poly-lactic-co-glycolic acid (PLGA) scaffolds, infused with adenoviral constructs that carry osteoinductive factor genes, may provide an effective alternative to existing bone grafts for the reconstruction of extensive bone defects. This study aims to develop and investigate the properties of 3D scaffolds composed of PLGA and adenoviral constructs carrying the BMP2 gene (Ad-BMP2), both in vitro and in vivo. The elastic modulus of the disk-shaped PLGA scaffolds created using a specialized 3D printer was determined by compressive testing in both axial and radial directions. In vitro cytocompatibility was assessed using adipose-derived stem cells (ADSCs). The ability of Ad-BMP2 to transduce cells was evaluated. The osteoinductive and biocompatible properties of the scaffolds were also assessed in vivo. The Young’s modulus of the 3D-printed PLGA scaffolds exhibited comparable values in both axial and radial compression directions, measuring 3.4 ± 0.7 MPa for axial and 3.17 ± 1.4 MPa for radial compression. The scaffolds promoted cell adhesion and had no cytotoxic effect on ADSCs. Ad-BMP2 successfully transduced the cells and induced osteogenic differentiation in vitro. In vivo studies demonstrated that the 3D-printed PLGA scaffolds had osteoinductive properties, promoting bone formation within the scaffold filaments as well as at the center of a critical calvarial bone defect.
1 March 2021 in Inorganic Materials: Applied Research
This paper investigates changes in the surface morphology, internal structure, and the molecular mass distribution of amorphous poly-DL-lactides during their hydrolytic degradation in the presence of extra-germinal mesenchymal stem cells (MSCs) (Wharton’s jelly of umbilical cord) of the rat and their metabolic products. It is shown that the degradation of initially monolithic polymer samples in culture and conditioned media is almost identical. However, in a culture medium containing MSCs, this process is much more intense. This effect can be interpreted in terms of the influence of enzymes secreted by living cells, which diffuse from the surface deep into the polymer sample and accelerate its hydrolysis, participating in a catalytic reaction with the ester bonds of polylactide molecules. We developed and verified a mathematical model that takes into account both noncatalytic and catalytic channels of hydrolysis, changes in the porosity of the polymer sample, and diffusion of short-length oligomers; this model is used to adequately interpret the experimental results.