This article deals with a novel fractional-order active disturbance rejection control (FADRC) scheme to handle a general integer-order system. The proposed control structure enhances the robustness and performance of the classical active disturbance rejection control, especially for the open-loop gain variation. Based on the Bode's ideal transfer function, an analytical design of a state-feedback control is proposed. The integer-order model of the system to be controlled is first transformed to a noninteger-order one, where the introduced fractional order is a design parameter, which imposes the overshoot of the closed-loop step response. In addition, because the model of the system is transformed to a cascade of integer- and fractional-order integrator (the model is noncommensurate), a commensurate fractional-order extended state observer is proposed to estimate the generalized disturbance. To improve the robustness of the proposed FADRC scheme, an analytical design method of a noncommensurate state-feedback control is proposed. The proposed design method is based on the Bode's ideal transfer function cascaded with an integer-order filter. The proposed FADRC scheme is applied for a pendulum-cart test bed, and the effectiveness and robustness of the proposed control are examined by experiments.
1 February 2016 in Aerospace Science and Technology
This paper addresses the distributed average tracking (DAT) problem for a group of agents to track the average of multiple time-varying reference signals, each of which is available to only one agent, under local interaction with neighbors and an undirected graph. We consider three cases: 1) DAT for single-integrator dynamics with a chain of integrators in algorithm design; 2) DAT with swarm behavior for single-integrator dynamics; and 3) DAT with swarm behavior for double-integrator dynamics. First, a continuous distributed algorithm with a chain of two integrators is proposed for single-integrator dynamics, where each agent needs its own and its neighbors' filter outputs obtained through communication besides its absolute position, local relative positions, reference signal, and reference velocity. The introduced algorithm can deal with a wide class of reference signals with steady deviations among reference velocities. Then, two swarm-based DAT algorithms for, respectively, single- and double-integrator dynamics are presented. In the first swarm-based algorithm for single-integrator dynamics, each agent needs to measure the relative positions between itself and its neighbors, while in the second swarm-based algorithm for double-integrator dynamics, relative velocity information is required too. In both cases, the information can be obtained through local sensing. If correct initialization constraints can be achieved, the center of the agents will track the average of the reference signals and the agents will maintain connectivity and avoid interagent collision. Numerical simulations are also presented to illustrate the theoretical results. Finally, the algorithms presented in this paper are experimentally implemented and validated on a multirobot platform.
This paper presents a low cost FPGA based solution for a real-time moving object tracking system. A specialized architecture is presented based on a soft RISC processor capable of running kernel based mean shift tracking algorithm. The system includes a frame grabber unit that stores the video frame in DDR RAM using direct memory access, a video display unit to monitor the tracking statistics and a soft processor capable of running mean shift tracking algorithm within the required time constraint.
Maximum power point tracking (MPPT) controllers have already achieved remarkable efficiencies. For smaller photovoltaic (PV) systems, any improvement will not really be worth mentioning as an achievement. However, for large solar farms, even a fractional improvement will eventually create a significant impact. This paper presents an MPPT control scheme using global sliding mode control (GSMC) with adaptive gain scheduling. In the two-loop controller, the first loop determines the maximum power point (MPP) reference using online calculations, while the GSMC with adaptive gain scheduling in the second loop adjusts the boost converter’s pulse width modulation (PWM) to force the PV system to operate at the MPP with improved performance. The adaptive gain scheduling regulates the gain of the switching control to maintain the controller performance over a wide range of operating conditions, while GSMC guarantees the system robustness throughout the control process by eliminating the reaching phase and improving MPPT performance. The overall PV system also has Lyapunov stability. Furthermore, the robustness analysis of the proposed controller is also performed under load variations and parametric uncertainties at various temperatures and irradiances. In the simulations, the proposed MPPT control scheme has shown faster response than other controllers, reaching the set point with rise time 0.03 s as compared to 0.07 s and 0.13 s for quasi sliding mode control (QSMC) and conventional sliding mode control (CSMC), respectively. The proposed controller showed an overshoot of 1.2 V around a steady state value of 21.9 V as compared to 1.51 V and 1.45 V, respectively, for QSMC and CSMC for a certain parametric variation. Furthermore, the proposed controller and the QSMC-based scheme showed a steady-state error of 0.3 V, while the CSMC-based approach has a more significant error. In conclusion, the proposed MPPT control scheme has a faster response and low tracking error with minimal oscillations.