Human exposure to Volatile Organic Compounds (VOCs) and their presence in indoor and working environments is recognized as a serious health risk, causing impairments of varying severities. Different detecting systems able to monitor VOCs are available in the market; however, they have significant limitations for both sensitivity and chemical discrimination capability. During the last years we studied systematically the use of Fourier Transform Infrared (FTIR) spectroscopy as an alternative, powerful tool for quantifying VOCs in air. We calibrated the method for a set of compounds (styrene, acetone, ethanol and isopropanol) by using both laboratory and portable infrared spectrometers. The aim was to develop a new, and highly sensitive sensor system for VOCs monitoring. In this paper, we improved the setup performance, testing the feasibility of using a multipass cell with the aim of extending the sensitivity of our system down to the part per million (ppm) level. Considering that multipass cells are now also available for portable instruments, this study opens the road for the design of new high-resolution devices for environmental monitoring.
Municipal solid waste (MSW) is commonly treated at high temperatures (T); the most abundant product is the so-called granular bottom ash (BA), a complex inorganic residue that shares several features with silicate rocks but can directly release harmful components. To overcome these aspects, new glass-ceramics were prepared by reheating BA at variable high-T (1000, 1100, 1200, and 1300 °C) and dwell times (t) (2/16 h); these 15 run-products were analysed by XRPD, SEM, EPMA, and leaching potential. XRPD reveals that BA and the 15 obtained materials contain a glass phase, which increases as T and t approach their maximum values; at the lowest T and t, several crystalline phases are observed that progressively disappear as the heat-treatment becomes more intense. The complementary SEM and EPMA characterisations corroborate the XRPD outcomes. The measured glass fraction by image analysis increases as both T and t increase. As T moves from relatively low to high (also as t increases), the produced glass-ceramics change from crystal- to glass-dominated products; silicate crystalline phases inherited from the starting BA progressively dissolve, while spinel-group minerals persist or newly (chromite) crystallise, acting as key hosts for Fe, Cr, and Zn. Leaching tests performed on representative glass-rich products at 1200 °C demonstrate effective immobilisation of environmentally relevant elements, with concentrations below regulatory limits. The proposed approach allows for concentrating metallic elements in spinel structures at T ≥ 1200 °C; they are easily separable after comminution and magnetic sorting from the most abundant silicate glassy matrix.