Dezhi Chang

Dr. Dezhi Chang


Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
11 May 2022 in Materials
Verified
Journal Article
Open access
PDF file
ZTzhi tang
zhi tang
HWHao Wu
Hao Wu
YLYing Liu
Ying Liu
YPYishan Pan
Yishan Pan
JLJinGuo LV
JinGuo LV
DCDezhi Chang
Dezhi Chang
In order to improve the impact resistance mechanical properties of bolt, the requirements of rock burst roadway support must be met. Based on the requirements that the anchor should have a reasonable deformation load threshold, high stroke efficiency, constant reaction force and stable repeatable deformation damage mode. A constant resistance anti-impact device was designed, and a new constant resistance energy-absorbing impact anchor rod was designed in combination with a conventional anchor rod, and the working principle of a constant resistance energy-absorbing impact anchor rod was given. ABAQUS finite element software was used to analyze the mechanical properties of bolt and the results showed that the constant resistance energy-absorbing anti-shock anchor has a stable and repeatable deformation damage mode under both static and impact loads, and the three indexes of the constant resistance energy-absorbing anti-shock anchor, such as yield distance, impact resistance time and energy absorption, are significantly better than those of the conventional anchor. The impact energy and impact velocity have less influence on the load-bearing capacity and stroke efficiency of the impact device. The impact velocity has less influence on the indices of the rod yield load, breaking load, absorbed energy and the yield distance of a conventional anchor and constant resistance energy-absorbing anti-stroke anchor, and the impact resistance time decreases non-linearly with the increase in the impact velocity.

6 April 2023 in Processes
Verified
Journal Article
Open access
PDF file
ZTzhi tang
zhi tang
WZWenbo Zuo
Wenbo Zuo
晓蔡晓桥 蔡
晓桥 蔡
DCDezhi Chang
Dezhi Chang
CWChunye Wu
Chunye Wu
In order to enhance the anti-impact mechanical properties of the roadway support system, an automatic anchoring pre-tightening energy absorbing anchor composed of rod body, tray, constant resistance energy absorber, energy-absorbing casing bulging block, pre-tightening force warning washer, and nut and anchorage force warning stopper was designed and developed for the special requirements of rock burst roadway support. The anchor can automatically judge the anchoring force and pre-tightening force of the anchor, and also has the functions of energy absorption and early warning. The static load tensile test and impact test are used to study the mechanical properties of the energy absorbing anchor, such as the displacement distance, energy absorption, and impact time, and they are then compared with the mechanical properties of the conventional anchor. It is concluded that under static load, the yielding distance of the energy absorbing anchor is 1.67 times that of conventional anchor. The absorbed energy is 1.61 times that of the conventional anchor. Under the impact load, the displacement distance of the energy absorbing anchor is 2.02 times that of the conventional anchor. The absorbed energy is 1.85 times that of the conventional anchor, and the anti-impact time is 1.47 times that of the conventional anchor. The energy absorbing anchor increases the constant resistance deformation stage of the energy absorber during the deformation process, so that the anchor has better deformation ability, energy absorption, and anti-impact ability than the conventional anchor, and it can thus effectively guide and control the release and transformation of surrounding rock deformation energy.

16 April 2023 in Sustainability
Verified
Journal Article
Open access
PDF file
ZTzhi tang
zhi tang
DCDezhi Chang
Dezhi Chang
晓蔡晓桥 蔡
晓桥 蔡
JLJinGuo LV
JinGuo LV
HWHao Wu
Hao Wu
Conventional FRP anchor rods have low elongation and poor impact resistance, both of which do not meet the support requirements of rock burst roadways. Therefore, a pressure energy-absorbing FRP anchor rod composed of an FRP rod body, tray, energy-absorbing sleeve and round table nut was designed. Numerical simulations were carried out to study the mechanical properties of the FRP anchor rod in static tension and impact tension, and to compare its mechanical properties with those of conventional FRP anchor rods. The results show that the pressure energy-absorbing FRP anchor rod is stretched in four stages: the front-elastic stage, constant resistance to compression, the back-elastic stage and damage, with an additional constant resistance to compression stage compared with conventional FRP anchors. The elongation, energy absorption and impact resistance time of the pressure energy-absorbing FRP anchor rods are greater than those of conventional FRP anchor rods, and the mechanical properties of the pressure energy-absorbing FRP anchor rods are better than those of conventional FRP anchor rods. As the impact velocity increases, the energy absorption rate of the pressure energy-absorbing FRP anchor increases non-linearly. The impact energy and impact velocity have less influence on the breaking load, elongation and energy absorption of pressure energy-absorbing FRP anchor rods. The research results can provide a theoretical basis for the application and parameter design of the pressure energy-absorbing FRP anchor rod, and provide support for the safe and efficient mining of the mine.