JinGuo LV

Prof. Dr. JinGuo LV


Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
21 April 2024 in Sustainability
Verified
Journal Article
Open access
PDF file
JLJinGuo LV
JinGuo LV
WWWenqi Wang
Wenqi Wang
TDTe Dai
Te Dai
BLBaoyong Liu
Baoyong Liu
GLGuangwei Liu
Guangwei Liu
In this study, Setaria viridis was selected as the research object, the soil reinforcement mode of roots was analyzed, and the general mechanical model of soil reinforcement was proposed. The direct shear tests of root–soil composite and root tensile tests were carried out, and the relationship between the root additional cohesion and root depth was studied. Furthermore, numerical simulations were established to explore the variation law of shallow displacement and slope stability as a function of the root ratio. The results show that the effect of herbaceous plant roots on the soil was composed of material modification and root binding force on the soil. The shear strength improvement of the root–soil composite was mainly reflected by the increase in cohesion. Furthermore, the composite cohesion was positively correlated with the root content but negatively correlated with the water content. With the increase in root diameter, the tensile strength of the Setaria viridis root increased linearly, but its tensile strength decreased and showed a power relation. The greater the total cohesion of the root–soil composite layer, the smaller the total displacement and the higher the slope stability. Thus, the slope’s herbaceous vegetation could effectively control the deformation and slip of the shallow soil, which has good application value for reducing soil erosion in mining areas.

27 March 2024 in Processes
Verified
Journal Article
Open access
PDF file
ZTzhi tang
zhi tang
ZWZhiwei WU
Zhiwei WU
DJDunwei Jia
Dunwei Jia
JLJinGuo LV
JinGuo LV
The distribution law of the ground stress field is of great significance in guiding the design of coal mine roadway alignment, determining the parameters of roadway support, and preventing and controlling the impact of ground pressure in coal mines. A geostress inversion method combining Rhino surface modeling and FLAC3D 6.0 numerical simulation software is proposed. Based on the geological data of the coal mine and the results of on-site measurements, a three-dimensional geological model of Yingcheng Coal Mine is established for the geostress inversion, and the distribution law of the geostress field in Yingcheng Coal Mine is obtained. Research shows the following: (1) The horizontal maximum principal stress values of the Yingcheng Mine are between 33.9 and 35.3 MPa, the horizontal minimum principal stress values are between 23.6 and 25.4 MPa, and the direction of the horizontal maximum principal stress is roughly in the southwest to west direction; (2) the three-way principal stress magnitude relationship is σH > σv > σh, indicating that the horizontal stress dominates in the study area, which belongs to the slip-type stress state; (3) The maximum principal stress of No. 3 coal seam is 33.1–34.8 MPa, the middle principal stress is 27.5–29.2 MPa, and the minimum principal stress is 17.3–22.9 MPa. Due to the influence of topography and burial depth, there is a phenomenon of stress concentration in some areas. By comparing the inversion values with the measured values, the accuracy of the geostress inversion is high, and the initial geostress inversion method based on Rhino surface modeling accurately inverts the geostress distribution pattern of the Yingcheng coal mine.

11 May 2022 in Materials
Verified
Journal Article
Open access
PDF file
ZTzhi tang
zhi tang
HWHao Wu
Hao Wu
YLYing Liu
Ying Liu
YPYishan Pan
Yishan Pan
JLJinGuo LV
JinGuo LV
DCDezhi Chang
Dezhi Chang
In order to improve the impact resistance mechanical properties of bolt, the requirements of rock burst roadway support must be met. Based on the requirements that the anchor should have a reasonable deformation load threshold, high stroke efficiency, constant reaction force and stable repeatable deformation damage mode. A constant resistance anti-impact device was designed, and a new constant resistance energy-absorbing impact anchor rod was designed in combination with a conventional anchor rod, and the working principle of a constant resistance energy-absorbing impact anchor rod was given. ABAQUS finite element software was used to analyze the mechanical properties of bolt and the results showed that the constant resistance energy-absorbing anti-shock anchor has a stable and repeatable deformation damage mode under both static and impact loads, and the three indexes of the constant resistance energy-absorbing anti-shock anchor, such as yield distance, impact resistance time and energy absorption, are significantly better than those of the conventional anchor. The impact energy and impact velocity have less influence on the load-bearing capacity and stroke efficiency of the impact device. The impact velocity has less influence on the indices of the rod yield load, breaking load, absorbed energy and the yield distance of a conventional anchor and constant resistance energy-absorbing anti-stroke anchor, and the impact resistance time decreases non-linearly with the increase in the impact velocity.

19 February 2023 in Sustainability
Verified
Journal Article
Open access
PDF file
HZHongrui Zhao
Hongrui Zhao
YPYishan Pan
Yishan Pan
JLJinGuo LV
JinGuo LV
YPYisheng Peng
Yisheng Peng
JLJinguo Lyu
Jinguo Lyu
The large diameter pressure relief borehole is one of the most effective technical means to prevent and control rockburst during deep mining. Based on the engineering background of rockburst mines, the mechanical model of coal energy dissipation of large diameter pressure relief holes is established by theoretical analysis, and the approximate formula for calculating energy dissipation of coal is obtained. Combined with numerical simulation methods, the energy accumulation and dissipation laws of coal under various mining depths and the various spacings of pressure relief holes is studied. The results show that the upper and lower ends of the pressure relief holes have the highest degree of energy dissipation and the largest range of energy dissipation. While the energy dissipation effect on the left and right sides of the pressure relief holes is poor, a high accumulation of elastic strain energy occurs at a certain distance on the left and right sides of the relief holes. The dissipated energy of the coal seam increases continuously with the increase in mining depth and the decrease in spacing of pressure relief holes. The dissipated energy rises especially suddenly when the hole spacing changes from 1.0 m to 0.5 m. For coal seams with high rockburst risk, the spacing of pressure relief holes can be set to be less than or equal to 0.5 m, which can greatly improve the energy dissipation effect of coal seams. The studies can provide a theoretical basis for the optimization parameters of pressure relief holes for rockburst prevention.

9 April 2024 in Sustainability
Verified
Journal Article
Open access
PDF file
JLJinGuo LV
JinGuo LV
JLJinguo Lyu
Jinguo Lyu
YPYishan Pan
Yishan Pan
ZTzhi tang
zhi tang
Monitoring and preventing coal–rock dynamic disasters are essential for ensuring sustainable and safe mining. Induced charge monitoring, as a geophysical method, enables sustainable monitoring of coal–rock deformation and failure. The induced charge signal contains crucial information regarding damage evolution, making it imperative and important to explore its temporal characteristics for effective monitoring and early warnings of dynamic disasters in deep mining. This paper conducted induced charge monitoring tests at different loading rates, investigating the multifractal characteristics of induced charge signals during the early and late stages of loading. It proposed the maximum generalized dimension D(q)max, multifractal spectrum width Δα, and height difference Δf as multifractal parameters for induced charge signals. Additionally, quantitative characterization of coal damage was performed, studying the variation patterns of signal multifractal characteristic parameters with coal damage evolution. This study revealed the induced charge signal of the coal body multifractal characteristics in the whole loading process. In the late loading stage, the double logarithmic curve demonstrated some nonlinearity compared to the previous period, indicating the higher non-uniformity of the induced charge time series. D(q)max and Δα in the late loading stage were higher than those in the early stage and increased with loading rates. As coal damage progressed, there were significant jumps of D(q)max in both the early and late stages of damage, with larger jumps indicating richer fracture events in the coal. The width Δα showed an overall trend of increase–decrease–increase with coal damage evolution, while the height difference Δf fluctuated around zero in the early stage of damage development but increased significantly during severe damage and destruction. By studying the multifractal characteristics of induced charge signals, this study provides insights for the early identification of coal–rock dynamic disasters.

16 April 2023 in Sustainability
Verified
Journal Article
Open access
PDF file
ZTzhi tang
zhi tang
DCDezhi Chang
Dezhi Chang
晓蔡晓桥 蔡
晓桥 蔡
JLJinGuo LV
JinGuo LV
HWHao Wu
Hao Wu
Conventional FRP anchor rods have low elongation and poor impact resistance, both of which do not meet the support requirements of rock burst roadways. Therefore, a pressure energy-absorbing FRP anchor rod composed of an FRP rod body, tray, energy-absorbing sleeve and round table nut was designed. Numerical simulations were carried out to study the mechanical properties of the FRP anchor rod in static tension and impact tension, and to compare its mechanical properties with those of conventional FRP anchor rods. The results show that the pressure energy-absorbing FRP anchor rod is stretched in four stages: the front-elastic stage, constant resistance to compression, the back-elastic stage and damage, with an additional constant resistance to compression stage compared with conventional FRP anchors. The elongation, energy absorption and impact resistance time of the pressure energy-absorbing FRP anchor rods are greater than those of conventional FRP anchor rods, and the mechanical properties of the pressure energy-absorbing FRP anchor rods are better than those of conventional FRP anchor rods. As the impact velocity increases, the energy absorption rate of the pressure energy-absorbing FRP anchor increases non-linearly. The impact energy and impact velocity have less influence on the breaking load, elongation and energy absorption of pressure energy-absorbing FRP anchor rods. The research results can provide a theoretical basis for the application and parameter design of the pressure energy-absorbing FRP anchor rod, and provide support for the safe and efficient mining of the mine.