Binhai Zhu

Dr. Binhai Zhu

Northeast Forestry University, Harbin, Heilongjiang, China

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
18 May 2023 in Forests
Verified
Journal Article
Open access
PDF file
BZBinhai Zhu
Binhai Zhu
JLJiuqing Liu
Jiuqing Liu
CYChunmei Yang
Chunmei Yang
WQWen Qu
Wen Qu
PDPeng Ding
Peng Ding
The intermittent hole-digging tree-planting machine shows a periodic short-time peak load law in planting operation, and the operation process is “idling” for small loads most of the time, leading to large torque fluctuations in the transmission system, unscientific power matching, and high energy consumption. To solve the above problems, this article proposes to use a series of energy-saving flywheels in the transmission system of the tree planting machine. On the premise of obtaining holes that meet the target young tree planting requirements, the optimal power compensation strategy for the flywheel system of the tree planting machine is studied to reduce torque fluctuations in the power transmission system, use smaller power drive units, and save energy. Firstly, the nonlinear multi-body dynamics simulation model of soil cutting by the hole-digging component is established. The boundary and contact conditions are set to simulate the power consumption of the hole-digging component at three rotating speeds. Based on the simulation results, the flywheel power compensation strategy is discussed, and the torque fluctuation of the flywheel balance system is analyzed. The results showed that the higher the speed, the greater the power consumption. The power value suddenly increased from 17.82 kW (1.28 s) to 27.93 kW (1.43 s) when the speed was 220 r/min. Then, the power value rapidly decreased, and the power consumption presented a short-term peak feature. The transmission system’s maximum input power is determined as 17.82 kW according to the various simulated power consumption characteristics. The part exceeding the power consumption is compensated by the energy storage flywheel. The total compensation energy was 2382.5 J. After the flywheel system was involved, the maximum output power of the tractor power output shaft decreased by 36.2%, and the peak torque decreased from 445.7 N·m to 285.1 N·m. The power consumption obtained from the field test and simulation was similar, but the energy required to overcome peak load was jointly provided by the flywheel and the engine. The actual input power of the power output shaft during the energy release period of the flywheel system was 18.51 kW when the rotating speed of the hole-digging component was 220 r/min, and the relative error with the simulation value was 2.43%. The measured actual speed reduction of the flywheel system was 8.9%. After installing an energy storage flywheel in the transmission system of the tree planting machine, the output power of the power unit can be stabilized. Tree planting machines can be equipped with smaller power units, which can reduce energy consumption and exhaust emissions.

2 October 2024 in Forests
Verified
Journal Article
Open access
PDF file
BZBinhai Zhu
Binhai Zhu
JLJiuqing Liu
Jiuqing Liu
YYYu Yu
Yu Yu
LYLi Yu
Li Yu
ZWZhenli Wang
Zhenli Wang
CYChunmei Yang
Chunmei Yang
Compared to agricultural environments, afforestation sites are more complex, often presenting issues such as undulating and uneven terrain. These conditions lead to instability in hole digging depth and plant spacing during continuous movement, and the hole shape may not meet expectations. Additionally, the hydraulic system exhibits slow response speed and long steady-state time, affecting the quality of sapling planting. To address these issues, this paper designs an intelligent planting control system for intermittent hole digging under continuous dynamic movement, based on a large tree planter. The focus is on studying the dynamic accuracy of the hole digging cylinder to resolve the instability of plant spacing and planting depth in actual planting processes. Firstly, a motion trajectory model of the intermittent hole digging mechanism is established to obtain the relationship between the displacement trajectory of the rotating cutter and the displacements of the floating cylinder and the hole digging cylinder. Secondly, a mathematical model of the electro-hydraulic servo system is established to control the dynamic accuracy of the hole digging operation. Finally, a Simulink simulation model of the system is established to analyze the performance indicators of the hydraulic system during operation using step and sinusoidal excitation signals. The test results show that the displacement of the hydraulic piston rod can ensure a linear extension trend within the range of 0 to 0.4 m, and the extension distance of the hole digging cylinder in the planting system is 0 to 0.35 m, ensuring linear change within this stroke. When the system’s extension command is 1 V, the actual output is 0.6 m, with a relative error of less than 10% compared to the simulation value, indicating that the control strategy can effectively improve the dynamic performance of the system. When the hydraulic system is in a steady-state extension state at 50 to 58.6 s, the relative error with the simulation value is 7.3%, meeting the “double ten indicators” requirement. The research results clearly verify the superior performance of the proposed intelligent control system, and the proposed control strategy has great potential in practical applications, promising to improve afforestation quality by stabilizing planting spacing and planting depth.