Wen Qu

Dr. Wen Qu


Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
21 September 2023 in Micromachines
Verified
Journal Article
Open access
PDF file
TZTao Zhang
Tao Zhang
XLxiong liuguang
xiong liuguang
ZPZequan Pan
Zequan Pan
CZChunhua Zhang
Chunhua Zhang
WQWen Qu
Wen Qu
CYChunmei Yang
Chunmei Yang
This study presents a newly developed piezoelectric drive mechanism for the purpose of designing, analyzing, and testing a micro-positioning platform driven by piezoelectric actuators. The platform incorporates a piezoelectric ceramic actuator and a flexible hinge drive and features a symmetrical two-stage lever (STSL) amplification mechanism and a parallelogram output structure. The implementation of this design has led to notable enhancements in the dynamic properties of the platform, thereby eliminating the undesired parasitic displacement of the mechanism. An analytical model describing the fully elastic deformation of the platform is established, which is further verified by finite element simulation. Finally, the static and dynamic performances of the platform are comprehensively evaluated through experiments. A closed-loop control strategy is adopted to eliminate the nonlinear hysteresis phenomenon of the piezoceramic actuator (PEA). The experimental results show that the piezoelectric micro-actuator platform has a motion range of 97.84 μm × 98.03 μm; the output coupling displacement error is less than 1%; the resolutions of the two axes are 8.1 nm and 8 nm, respectively; and the x-axis and y-axis trajectory tracking errors are both 0.6%. The piezoelectric micromotion platform has good dynamic properties, precision, and stability. The design has a wide application potential in the field of micro-positioning.

12 January 2024 in Micromachines
Verified
Journal Article
Open access
PDF file
TZTao Zhang
Tao Zhang
ZPZequan Pan
Zequan Pan
CZChunhua Zhang
Chunhua Zhang
XLxiong liuguang
xiong liuguang
CYChunmei Yang
Chunmei Yang
WQWen Qu
Wen Qu
In this paper, a microheater that can absorb thermal stress and has a large heating area is demonstrated by optimizing the structure and process of the microheater. Four symmetrically distributed elongated support beam structures were machined around the microheater via deep silicon etching. This design efficiently mitigates the deformation of the heated region caused by thermal expansion and enhances the structural stability of the microheater. The updated microheater no longer converts the work area into a thin film; instead, it creates a stable heating platform that can uniformly heat a work area measuring 10 × 10 mm2. The microheater is verified to have high temperature uniformity and structural stability in finite element simulation. Finally, thorough investigations of electrical–thermal–structural characterization were conducted. The test findings show that the new microheater can achieve 350 °C with a power consumption of 6 W and a thermal reaction time of 22 s. A scan of its whole plane reveals that the surface of the working area of the new microheater is flat and does not distort in response to variations in temperature, offering good structural stability.

14 November 2023 in Energies
Verified
Journal Article
Open access
PDF file
TZTao Zhang
Tao Zhang
YWYang Wang
Yang Wang
RMRui Ma
Rui Ma
YZYi Zhao
Yi Zhao
Mengjiao ShiMengjiao Shi
Mengjiao Shi
WQWen Qu
Wen Qu
With the use of Li-ion batteries, Li-ion batteries will experience unavoidable aging, which can cause battery safety issues, performance degradation, and inaccurate SOC estimation, so it is necessary to predict the state of health (SOH) of Li-ion batteries. Existing methods for Li-ion battery state of health assessment mainly focus on parameters such as constant voltage charging time, constant current charging time, and discharging time, with little consideration of the impact of changes in Li-ion battery temperature on the state of health of Li-ion batteries. In this paper, a new prediction method for Li-ion battery health state based on the surface difference temperature (DT), incremental capacity analysis (ICA), and differential voltage analysis (DVA) is proposed. Five health factors are extracted from each of the three curves as input features to the model, respectively, and the weights, thresholds, and number of hidden layers of the Elman neural network are optimized using the Whale of a Whale Algorithm (WOA), which results in an average decrease of 43%, 49%, and 46% in MAE, RMSE, and MAPE compared to the Elman neural network. For the problem where the three predictions depend on different sources, the features of the three curves are fused using the weighted average method and predicted using the WOA–Elman neural network, whose MAE, RMSE, and MAPE are 0.00054, 0.0007897, and 0.06547% on average. The results show that the proposed method has an overall error of less than 2% in SOH prediction, improves the accuracy and robustness of the overall SOH estimation, and reduces the computational burden to some extent.

20 April 2023 in Forests
Verified
Journal Article
Open access
PDF file
CYChunmei Yang
Chunmei Yang
Tongbin LiuTongbin Liu
Tongbin Liu
MYMa YaQiang
Ma YaQiang
WQWen Qu
Wen Qu
YDYucheng Ding
Yucheng Ding
WSwenlong song
wenlong song
Circumferential milling is used in wood processing, yet it generates vast quantities of dust and chips in a single pass, highlighting the need to predict chip dispersion and prevent associated hazards. This article presents findings from a theoretical and experimental analysis of chip size and kinematics of pine wood during cutting. A chip diffusion boundary surface model was established and its key parameters were determined through CCD testing. Results reveal that chip diffusion can be divided into three distinct areas based on motion state: main diffusion, random diffusion, and vortex. Notably, spindle speed and feed rate are most influential on the orthogonal diffusion angle of the main diffusion zone, whereas cutting depth most heavily impacts the top view diffusion angle. Chip scattering on the table showed an exponential increase in average chip size with sampling distance, whereas the boundary surface model accurately characterizes chip motion and demonstrates a reasonable degree of reliability, offering potential in predicting chip morphology and diffusion state. This model has important implications for wood milling practices, particularly in controlling chip dispersion.

18 May 2023 in Forests
Verified
Journal Article
Open access
PDF file
BZBinhai Zhu
Binhai Zhu
JLJiuqing Liu
Jiuqing Liu
CYChunmei Yang
Chunmei Yang
WQWen Qu
Wen Qu
PDPeng Ding
Peng Ding
The intermittent hole-digging tree-planting machine shows a periodic short-time peak load law in planting operation, and the operation process is “idling” for small loads most of the time, leading to large torque fluctuations in the transmission system, unscientific power matching, and high energy consumption. To solve the above problems, this article proposes to use a series of energy-saving flywheels in the transmission system of the tree planting machine. On the premise of obtaining holes that meet the target young tree planting requirements, the optimal power compensation strategy for the flywheel system of the tree planting machine is studied to reduce torque fluctuations in the power transmission system, use smaller power drive units, and save energy. Firstly, the nonlinear multi-body dynamics simulation model of soil cutting by the hole-digging component is established. The boundary and contact conditions are set to simulate the power consumption of the hole-digging component at three rotating speeds. Based on the simulation results, the flywheel power compensation strategy is discussed, and the torque fluctuation of the flywheel balance system is analyzed. The results showed that the higher the speed, the greater the power consumption. The power value suddenly increased from 17.82 kW (1.28 s) to 27.93 kW (1.43 s) when the speed was 220 r/min. Then, the power value rapidly decreased, and the power consumption presented a short-term peak feature. The transmission system’s maximum input power is determined as 17.82 kW according to the various simulated power consumption characteristics. The part exceeding the power consumption is compensated by the energy storage flywheel. The total compensation energy was 2382.5 J. After the flywheel system was involved, the maximum output power of the tractor power output shaft decreased by 36.2%, and the peak torque decreased from 445.7 N·m to 285.1 N·m. The power consumption obtained from the field test and simulation was similar, but the energy required to overcome peak load was jointly provided by the flywheel and the engine. The actual input power of the power output shaft during the energy release period of the flywheel system was 18.51 kW when the rotating speed of the hole-digging component was 220 r/min, and the relative error with the simulation value was 2.43%. The measured actual speed reduction of the flywheel system was 8.9%. After installing an energy storage flywheel in the transmission system of the tree planting machine, the output power of the power unit can be stabilized. Tree planting machines can be equipped with smaller power units, which can reduce energy consumption and exhaust emissions.

5 February 2025 in Materials
Verified
Journal Article
Open access
PDF file
BGBo Guan
Bo Guan
WQWen Qu
Wen Qu
XTXinchi Tian
Xinchi Tian
ZZZihao Zhang
Zihao Zhang
GSGuoyu Sun
Guoyu Sun
CYChunmei Yang
Chunmei Yang
Due to severe global energy issues and the widespread demand for high-quality winter heating, this study designed a new type of graphene-based electrically heated solid wood composite floor. This flooring maintains the convenience of a traditional floor installation while providing users with a more comfortable living experience. Additionally, the low-temperature heating and temperature regulation system further reduces energy consumption, offering a new perspective for green home living. This paper introduces the overall structure and temperature control system of the graphene-heated solid wood composite flooring. Based on the above reasons, the working mechanism and heat transfer process of the graphene-heated flooring were analyzed, and a mathematical model was established. Furthermore, simulations of flooring with different thicknesses were conducted to determine temperature rise curves and corresponding times. Finally, a comparative experimental verification was conducted on the thermodynamic performance of the solid wood composite graphene flooring. The results showed that in the case of a floor with an 18 mm thickness, the time for the surface layer of the floor to reach 22 °C is 27 min; the time to reach 26 °C is 56 min; and that the time to reach 28 °C is 109 min. The time required to return to 22 °C after the power has been switched off is 25 min. The results also showed that one hour after the power was turned off, the surface temperature of the floor was still above 20 °C. The study shows that the graphene-heated flooring can be used to achieve high-quality heating.