To improve the intelligence level of particleboard inspection lines, machine vision and artificial intelligence technologies are combined to replace manual inspection with automatic detection. Aiming at the problem of missed detection and false detection on small defects due to the large surface width, complex texture and different surface defect shapes of particleboard, this paper introduces image super-resolution technology and proposes a super-resolution reconstruction model for particleboard images. Based on the Transformer network, this model incorporates an improved SRResNet (Super-Resolution Residual Network) backbone network in the deep feature extraction module to extract deep texture information. The shallow features extracted by conv 3 × 3 are then fused with features extracted by the Transformer, considering both local texture features and global feature information. This enhances image quality and makes defect details clearer. Through comparison with the traditional bicubic B-spline interpolation method, ESRGAN (Enhanced Super-Resolution Generative Adversarial Network), and SwinIR (Image Restoration Using Swin Transformer), the effectiveness of the particleboard super-resolution reconstruction model is verified using objective evaluation metrics including PSNR, SSIM, and LPIPS, demonstrating its ability to produce higher-quality images with more details and better visual characteristics. Finally, using the YOLOv8 model to compare defect detection rates between super-resolution images and low-resolution images, the mAP can reach 96.5%, which is 25.6% higher than the low-resolution image recognition rate.

The growth quality of Pinus massoniana (Lamb.) seedlings is closely related to the survival rate of afforestation. Moisture content detection is an important indicator in the cultivation of forest seedlings because it can directly reflect the adaptability and growth potential of the seedlings to the soil environment. To improve the accuracy of quantitative analysis of moisture content in P. massoniana seedlings using near-infrared spectroscopy, a total of 100 P. massoniana seedlings were collected, and their near-infrared diffuse reflectance spectra were measured in the range of 2500 to 800 nm (12,000 to 4000 cm⁻¹). An integrated learning framework was introduced, and a quantitative detection model for moisture content in P. massoniana seedlings was established by combining preprocessing and feature wavelength selection methods in chemometrics. Our results showed that the information carried by the spectra after multiple scattering correction (MSC) preprocessing had a good response to the target attribute. The stacking learning model based on the full-band spectrum had a prediction coefficient of determination R² of 0.8819, and the prediction accuracy of moisture content in P. massoniana seedlings could be significantly improved compared to the single model. After variable selection, the spectrum processed by MSC and feature selection with uninformative variable elimination (UVE) showed good prediction effects in all models. Additionally, the prediction coefficient of determination R² of the support vector regression (SVR)—adaptive boosting (AdaBoost)—partial least squares regression (PLSR) + AdaBoost model reached 0.9430. This indicates that the quantitative analysis model of moisture content in P. massoniana seedlings established through preprocessing, feature selection, and stacking learning models can achieve high accuracy in predicting moisture content in P. massoniana seedlings. This model can provide a feasible technical reference for the precision cultivation of P. massoniana seedlings.

Particleboard is an important forest product that can be reprocessed using wood processing by-products. This approach has the potential to achieve significant conservation of forest resources and contribute to the protection of forest ecology. Most current detection models require a significant number of tagged samples for training. However, with the advancement of industrial technology, the prevalence of surface defects in particleboard is decreasing, making the acquisition of sample data difficult and significantly limiting the effectiveness of model training. Deep reinforcement learning-based detection methods have been shown to exhibit strong generalization ability and sample utilization efficiency when the number of samples is limited. This paper focuses on the potential application of deep reinforcement learning in particleboard defect detection and proposes a novel detection method, PPOBoardNet, for the identification of five typical defects: dust spot, glue spot, scratch, sand leak and indentation. The proposed method is based on the proximal policy optimization (PPO) algorithm of the Actor-Critic framework, and defect detection is achieved by performing a series of scaling and translation operations on the mask. The method integrates the variable action space and the composite reward function and achieves the balanced optimization of different types of defect detection performance by adjusting the scaling and translation amplitude of the detection region. In addition, this paper proposes a state characterization strategy of multi-scale feature fusion, which integrates global features, local features and historical action sequences of the defect image and provides reliable guidance for action selection. On the particleboard defect dataset with limited images, PPOBoardNet achieves a mean average precision (mAP) of 79.0%, representing a 5.3% performance improvement over the YOLO series of optimal detection models. This result provides a novel technical approach to the challenge of defect detection with limited samples in the particleboard domain, with significant practical application value.

Pinus massoniana (Lamb.) is an important plantation species in southern China. Accurate measurement of P. massoniana seedling morphological indicators is crucial for accelerating seedling quality assessment. Machine vision, with its objectivity and stability, can replace human eyes in performing these measurements. In this paper, a measurement method for seedling morphological indicators based on Euclidean distance, Laplacian contraction, PointNet++, and 3D reconstruction is proposed. Firstly, multi-angle sequence images of 30 one-year-old P. massoniana seedlings were collected, distorted, and corrected to generate a sparse point cloud through the Structure-from-Motion (SFM) and dense point cloud through the Patch-Based Multiple View Stereo (PMVS). Secondly, a Dense Weighted Semantic Segmentation Model based on PointNet++ was designed, achieving effective segmentation of the P. massoniana seedling point clouds. Finally, a multi-iteration plane method based on Laplacian contraction was proposed. The new skeleton points were refined by minimizing the Euclidean distance, iteratively generating the optimal morphological skeleton, thus facilitating the extraction of morphological indicators. The experimental results demonstrated a good correlation between the machine vision-extracted morphological indicators (including plant height, ground diameter, and height-to-diameter ratio) and manually measured data. The improved PointNet++ model achieved an accuracy of 0.9448 on the training set. The accuracy and Mean Intersection over Union (MIoU) of the test set reached 0.9430 and 0.7872, respectively. These findings can provide reliable technical references for the accurate assessment of P. massoniana seedling quality and the promotion of digital forestry construction.

Particleboard has been widely used in furniture manufacturing, architectural decoration, packaging and logistics applications, and transportation, owing to its strong raw material adaptability, relatively low cost, and favorable processing performance, making it one of the foundational materials in the wood-based panel industry. Its surface quality directly determines the added value of final products. However, in actual production environments, the complex background textures of particleboard surfaces and the low contrast between defects and the background pose substantial challenges to automatic surface defect recognition. To address these issues, this paper proposes SFNet, a particleboard surface defect recognition network integrating spatial-domain and frequency-domain feature enhancement. The network adopts EfficientNet-B0 as its backbone, introduces a Dynamic Matrixed Color Correction (DMCC)module after Block 4 to adaptively adjust feature channel weights via a dynamic temperature mechanism, thereby enhancing the feature saliency of defects in the spatial domain, and embeds a Wavelet Transform Convolution module (WTConv) after Block 6 to map spatial features into the frequency domain, leveraging the differences in frequency response between defects and the background to improve the model’s sensitivity to high-frequency defect features and multi-scale texture information. The dataset comprised 2405 high-confidence defective image patches, including 2005 patches for the main classification experiment and 400 independent patches for illumination-robustness testing. Experimental results show that SFNet was evaluated on a test set of 401-images encompassing five types of defects on particleboard surfaces, namely shavings, dust spots, oil spots, glue spots, and pollution. Across five random seeds, the model achieved an average accuracy of 97.86% ± 0.28%, with the highest single-run accuracy reaching 98.25%. It outperforms the baseline classification models used for comparison in terms of accuracy, precision, recall, and F1-score. Grad-CAM visualization results further demonstrate that SFNet can effectively suppress interference from complex background textures and accurately focus on defective regions. These results indicate that the proposed method exhibits strong robustness and recognition stability, providing an efficient and reliable solution for automated particleboard surface quality inspection in industrial scenarios.