Ahmed Ben Ali

Dr. Ahmed Ben Ali


Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
20 April 2023 in Polymers
Verified
Journal Article
Open access
PDF file
REreem galal elaf
reem galal elaf
AAAhmed Ben Ali
Ahmed Ben Ali
Mohammed Ali H Saleh SaadMohammed Ali H Saleh Saad
Mohammed Ali H Saleh Saad
IHIbnelwaleed Hussein
Ibnelwaleed Hussein
HNHassan Nimir
Hassan Nimir
Baojun BaiBaojun Bai
Baojun Bai
Oil and gas extraction frequently produces substantial volumes of produced water, leading to several mechanical and environmental issues. Several methods have been applied over decades, including chemical processes such as in-situ crosslinked polymer gel and preformed particle gel, which are the most effective nowadays. This study developed a green and biodegradable PPG made of PAM and chitosan as a blocking agent for water shutoff, which will contribute to combating the toxicity of several commercially used PPGs. The applicability of chitosan to act as a crosslinker has been confirmed by FTIR spectroscopy and observed by scanning electron microscopy. Extensive swelling capacity measurements and rheological experiments were performed to examine the optimal formulation of PAM/Cs based on several PAM and chitosan concentrations and the effects of typical reservoir conditions, such as salinity, temperature, and pH. The optimum concentrations of PAM with 0.5 wt% chitosan were between 5–9 wt%, while the optimum chitosan amount with 6.5 wt% PAM was in the 0.25–0.5 wt% range, as these concentrations can produce PPGs with high swellability and sufficient strength. The swelling capacity of PAM/Cs is lower in high saline water (HSW) with a TDS of 67.2976 g/L compared with fresh water, which is related to the osmotic pressure gradient between the swelling medium and the PPG. The swelling capacity in freshwater was up to 80.37 g/g, while it is 18.73 g/g in HSW. The storage moduli were higher in HSW than freshwater, with ranges of 1695–5000 Pa and 2053–5989 Pa, respectively. The storage modulus of PAM/Cs samples was higher in a neutral medium (pH = 6), where the fluctuation behavior in different pH conditions is related to electrostatic repulsions and hydrogen bond formation. The increase in swelling capacity caused by the progressive increment in temperature is associated with the amide group’s hydrolysis to carboxylate groups. The sizes of the swollen particles are controllable since they are designed to be 0.63–1.62 mm in DIW and 0.86–1.00 mm in HSW. PAM/Cs showed promising swelling and rheological characteristics while demonstrating long-term thermal and hydrolytic stability in high-temperature and high-salinity conditions.

17 January 2024 in Gels
Verified
Journal Article
Open access
PDF file
AAAbdulaziz A Almakimi
Abdulaziz A Almakimi
AAAhmed Ben Ali
Ahmed Ben Ali
IHIbnelwaleed Hussein
Ibnelwaleed Hussein
Baojun BaiBaojun Bai
Baojun Bai
To address challenges associated with excessive water production in mature oil reservoirs, this study introduces a carboxymethyl cellulose (CMC)-based material as a novel preformed particle gel (PPG) designed to plug excessive water pathways and redistribute the subsequent injected water toward unswept zones. Through microwave-assisted grafting copolymerization of CMC with acrylamide (AM), we successfully generated multi-sized dry particles within the range of 250–800 µm. Comprehensive analyses, including Fourier-transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM), have confirmed the chemical composition and morphology of the resulting carboxymethyl cellulose-grafted crosslinked polyacrylamide (CMC/PAMBA). Swelling kinetics and rheology tests were conducted to confirm the ability of this novel PPG system to perform at different reservoir conditions. The results of core flooding experiments showed that the CMC/PAMBA PPG is capable of plugging open fractures with a water breakthrough pressure gradient of up to 144 psi/ft. This preformed particle gel (PPG) system was designed specifically for application in Middle East reservoirs, which are distinguished by high salinity and elevated temperature levels. This PPG system is able to swell up to 10 times its original size in seawater and maintain a strength of about 1300 Pa at a temperature of 80 °C. Further optimization is conceivable to enhance injection efficiency and achieve superior plugging outcomes.